Validation of the English and Chinese versions of the Quick-FLIC quality of life questionnaire.

A useful measure of quality of life should be easy and quick to complete. Recently, we reported the development and validation of a shortened Chinese version of the Functional Living Index-Cancer (FLIC), which we called the Quick-FLIC. In the present study of 327 English-speaking and 221 Chinese-speaking cancer patients, we validated the English version of the Quick-FLIC and further assessed the Chinese version. The 11 Quick-FLIC items were administered alongside the 11 remaining items of the full FLIC, but there appeared to be little context effect. Validity of the English version of the Quick-FLIC was attested by its strong correlation with two other measures of quality of life, and its ability to detect differences between patients with different performance status and treatment status (each P<0.001). Its internal consistency (alpha=0.86) and test-retest reliability (intraclass correlation=0.76) were also satisfactory. The measure was responsive to changes in performance status (P<0.001). The Chinese version showed similar characteristics. The Quick-FLIC behaved in ways that are highly comparable with the FLIC, even though the Quick-FLIC comprised only 11 items whereas the FLIC comprised 22. Further research is required to see whether the use of shorter instruments can improve data quality and response rates, but the fact that shorter instruments place less burden on the patients is itself inherently important

Are Asians comfortable with discussing death in health valuation studies? A study in multi-ethnic Singapore

BACKGROUND To characterize ease in discussing death (EID) and its influence on health valuation in a multi-ethnic Asian population and to determine the acceptability of various descriptors of death and "pits"/"all-worst" in health valuation. METHODS In-depth interviews (English or mother-tongue) among adult Chinese, Malay and Indian Singaporeans selected to represent both genders and a wide range of ages/educational levels. Subjects rated using 0–10 visual analogue scales (VAS): (1) EID, (2) acceptability of 8 descriptors for death, and (3) appropriateness of "pits" and "all-worst" as descriptors for the worst possible health state. Subjects also valued 3 health states using VAS followed by time trade-off (TTO). The influence of sociocultural variables on EID and these descriptors was studied using univariable analyses and multiple linear regression (MLR). The influence of EID on VAS/TTO utilities with adjustment for sociocultural variables was assessed using MLR. RESULTS Subjects (n = 63, 35% Chinese, 32% Malay, median age 44 years) were generally comfortable with discussing death (median EID: 8.0). Only education significantly influenced EID (p = 0.045). EID correlated weakly with VAS/TTO scores (range: VAS: -0.23 to 0.07; TTO: -0.14 to 0.11). All subjects felt "passed away", "departed" and "deceased" were most acceptable (median acceptability: 8.0) while "sudden death" and "immediate death" were least acceptable (median acceptability: 5.0). Subjects clearly preferred "all-worst" to "pits" (63% vs. 19%, p < 0.001). CONCLUSION Singaporeans were generally comfortable with discussing death and had clear preferences for several descriptors of death and for "all-worst". EID is unlikely to influence health preference measurement in health valuation studies

Connecting care chains and care diamonds: The elderly care skills regime in Singapore

College of Alice and Peter Tan (NUS

Health status of older adults with Type 2 diabetes mellitus after aerobic or resistance training: A randomised trial

10.1186/1477-7525-9-59Health and Quality of Life Outcomes9

Magnetic properties of exchange biased and of unbiased oxide/permalloy thin layers: a ferromagnetic resonance and Brillouin scattering study

Microstrip ferromagnetic resonance and Brillouin scattering are used to provide a comparative determination of the magnetic parameters of thin permalloy layers interfaced with a non-magnetic (Al2O3) or with an antiferromagnetic oxide (NiO). It is shown that the perpendicular anisotropy is monitored by an interfacial surface energy term which is practically independent of the nature of the interface. In the investigated interval of thicknesses (5-25 nm) the saturation magnetisation does not significantly differ from the reported one in bulk permalloy. In-plane uniaxial anisotropy and exchange-bias anisotropy are also derived from this study of the dynamic magnetic excitations and compared to our independent evaluations using conventional magnetometryComment: 7 pages, 6 figures, submited to Journal of Physics: Condensed Matte

The activation energy for GaAs/AlGaAs interdiffusion

Copyright 1997 American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. This article appeared in Journal of Applied Physics 82, 4842 (1997) and may be found at

Experimental observation of the crystallization of a paired holon state

A new excitation is observed at 201 meV in the doped-hole ladder cuprate Sr$_{14}$Cu$_{24}$O$_{41}$, using ultraviolet resonance Raman scattering with incident light at 3.7 eV polarized along the direction of the rungs. The excitation is found to be of charge nature, with a temperature independent excitation energy, and can be understood via an intra-ladder pair-breaking process. The intensity tracks closely the order parameter of the charge density wave in the ladder (CDW$_L$), but persists above the CDW$_L$ transition temperature ($T_{CDW_L}$), indicating a strong local pairing above $T_{CDW_L}$. The 201 meV excitation vanishes in La$_{6}$Ca$_{8}$Cu$_{24}$O$_{41+\delta}$, and La$_{5}$Ca$_{9}$Cu$_{24}$O$_{41}$ which are samples with no holes in the ladders. Our results suggest that the doped holes in the ladder are composite bosons consisting of paired holons that order below $T_{CDW}$.Comment: Accepted for publication in Physical Review Letters (4 figures

Structural Characterization of Rapid Thermal Oxidized Si\u3csub\u3e1−x−y\u3c/sub\u3eGe\u3csub\u3ex\u3c/sub\u3eC\u3csub\u3ey\u3c/sub\u3e Alloy Films Grown by Rapid Thermal Chemical Vapor Deposition

The structural properties of as-grown and rapid thermal oxidized Si1−x−yGexCy epitaxial layers have been examined using a combination of infrared, x-ray photoelectron, x-ray diffraction, secondary ion mass spectroscopy, and Raman spectroscopy techniques. Carbon incorporation into the Si1−x−yGexCy system can lead to compressive or tensile strain in the film. The structural properties of the oxidized Si1−x−yGexCy film depend on the type of strain (i.e., carbon concentration) of the as-prepared film. For compressive or fully compensated films, the oxidation process drastically reduces the carbon content so that the oxidized films closely resemble to Si1−xGex films. For tensile films, two broad regions, one with carbon content higher and the other lower than that required for full strain compensation, coexist in the oxidized films

One-dimensional collision carts computer model and its design ideas for productive experiential learning

We develop an Easy Java Simulation (EJS) model for students to experience the physics of idealized one-dimensional collision carts. The physics model is described and simulated by both continuous dynamics and discrete transition during collision. In the field of designing computer simulations, we discuss briefly three pedagogical considerations such as 1) consistent simulation world view with pen paper representation, 2) data table, scientific graphs and symbolic mathematical representations for ease of data collection and multiple representational visualizations and 3) game for simple concept testing that can further support learning. We also suggest using physical world setup to be augmented complimentary with simulation while highlighting three advantages of real collision carts equipment like tacit 3D experience, random errors in measurement and conceptual significance of conservation of momentum applied to just before and after collision. General feedback from the students has been relatively positive, and we hope teachers will find the simulation useful in their own classes. 2015 Resources added: http://iwant2study.org/ospsg/index.php/interactive-resources/physics/02-newtonian-mechanics/02-dynamics/46-one-dimension-collision-js-model http://iwant2study.org/ospsg/index.php/interactive-resources/physics/02-newtonian-mechanics/02-dynamics/195-elastic-collisionComment: 6 pages, 8 figures, 1 table, 1 L. K. Wee, Physics Education 47 (3), 301 (2012); ISSN 0031-912