69,538 research outputs found
Recommended from our members
The pupillary response of cephalopods
This paper provides the first detailed description of the time courses of light-evoked pupillary constriction for two species of cephalopods, Sepia officinalis (a cuttlefish) and Eledone cirrhosa (an octopus). The responses are much faster than hitherto reported, full contraction in Sepia taking less than 1 s, indicating it is among the most rapid pupillary responses in the animal kingdom. We also describe the dependence of the degree of pupil constriction on the level of ambient illumination and show considerable variability between animals. Furthermore, both Sepia and Eledone lack a consensual light-evoked pupil response. Pupil dilation following darkness in Sepia is shown to be very variable, often occurring within a second but at other times taking considerably longer. This may be the result of extensive light-independent variations in pupil diameter in low levels of illumination
A Symmetric Free Energy Based Multi-Component Lattice Boltzmann Method
We present a lattice Boltzmann algorithm based on an underlying free energy
that allows the simulation of the dynamics of a multicomponent system with an
arbitrary number of components. The thermodynamic properties, such as the
chemical potential of each component and the pressure of the overall system,
are incorporated in the model. We derived a symmetrical convection diffusion
equation for each component as well as the Navier Stokes equation and
continuity equation for the overall system. The algorithm was verified through
simulations of binary and ternary systems. The equilibrium concentrations of
components of binary and ternary systems simulated with our algorithm agree
well with theoretical expectations.Comment: 7 pager, 4 figure
Simulation of associative learning with the replaced elements model
Associative learning theories can be categorised according to whether they treat the representation of stimulus compounds in an elemental or configural manner. Since it is clear that a simple elemental approach to stimulus representation is inadequate there have been several attempts to produce more elaborate elemental models. One recent approach, the Replaced Elements Model (Wagner, 2003), reproduces many results that have until recently been uniquely predicted by Pearceās Configural Theory (Pearce, 1994). Although it is possible to simulate the Replaced Elements Model using āstandardā simulation programs the generation of the correct stimulus representation is complex. The current paper describes a method for simulation of the Replaced Elements Model and presents the results of two example simulations that show differential predictions of Replaced Elements and Pearceās Configural Theor
Inverter ratio failure detector
A failure detector which detects the failure of a dc to ac inverter is disclosed. The inverter under failureless conditions is characterized by a known linear relationship of its input and output voltages and by a known linear relationship of its input and output currents. The detector includes circuitry which is responsive to the detector's input and output voltages and which provides a failure-indicating signal only when the monitored output voltage is less by a selected factor, than the expected output voltage for the monitored input voltage, based on the known voltages' relationship. Similarly, the detector includes circuitry which is responsive to the input and output currents and provides a failure-indicating signal only when the input current exceeds by a selected factor the expected input current for the monitored output current based on the known currents' relationship
Effects of perforated flap surfaces and screens on acoustics of a large externally blown flap model
Various model geometries and combinations of perforated flap surfaces and screens mounted close to the flap surfaces were studied for application to jet-flap noise attenuation for externally blown flap, under-the-wing aircraft. The efforts to reduce jet-flap interaction noise were marginally successful. Maximum attenuations of less than 4 db in overall sound pressure level were obtained in the flyover plane. Noise reductions obtained in the low-to-middle-frequency ranges (up to 7 db) were generally offset by large increases in high-frequency noise (up to 20 db)
Noise reduction tests of large-scale-model externally blown flap using trailing-edge blowing and partial flap slot covering
Noise data were obtained with a large-scale cold-flow model of a two-flap, under-the-wing, externally blown flap proposed for use on future STOL aircraft. The noise suppression effectiveness of locating a slot conical nozzle at the trailing edge of the second flap and of applying partial covers to the slots between the wing and flaps was evaluated. Overall-sound-pressure-level reductions of 5 db occurred below the wing in the flyover plane. Existing models of several noise sources were applied to the test results. The resulting analytical relation compares favorably with the test data. The noise source mechanisms were analyzed and are discussed
Acoustic characteristics of externally blown flap systems with mixer nozzles
Noise tests were conducted on a large scale, cold flow model of an engine-under-the-wing externally blown flap lift augmentation system employing a mixer nozzle. The mixer nozzle was used to reduce the flap impingement velocity and, consequently, try to attenuate the additional noise caused by the interaction between the jet exhaust and the wing flap. Results from the mixer nozzle tests are summarized and compared with the results for a conical nozzle. The comparison showed that with the mixer nozzle, less noise was generated when the trailing flap was in a typical landing setting (e.g., 60 deg). However, for a takeoff flap setting (20 deg), there was little or no difference in the acoustic characteristics when either the mixer or conical nozzle was used
- ā¦