6,492 research outputs found
Effect of lubricant environment on saw damage in silicon wafers
The chemomechanical effect of lubricant environments on the inner diameter (ID) sawing induced surface damage in Si wafers was tested for four different lubricants: water, dielectric oil, and two commercial cutting solutions. The effects of applying different potential on Si crystals during the sawing were also tested. It is indicated that the number and depth of surface damage are sensitive to the chemical nature of the saw lubricant. It is determined that the lubricants that are good catalysts for breaking Si bonds can dampen the out of plane blade vibration more effectively and produce less surface damage. Correlations between the applied potential and the depth of damage in the dielectric oil and one of the commercial cutting solutions and possible mechanisms involved are discussed
Fast divide-and-conquer algorithms for preemptive scheduling problems with controllable processing times – A polymatroid optimization approach
We consider a variety of preemptive scheduling problems with controllable processing times on a single machine and on identical/uniform parallel machines, where the objective
is to minimize the total compression cost. In this paper, we propose fast divide-and-conquer algorithms for these scheduling problems. Our approach is based on the observation that each scheduling problem we discuss can be formulated as a polymatroid optimization problem.
We develop a novel divide-and-conquer technique for the polymatroid optimization problem and then apply it to each scheduling problem. We show that each scheduling problem can
be solved in O(Tfeas(n) log n) time by using our divide-and-conquer technique, where n is the number of jobs and Tfeas(n) denotes the time complexity of the corresponding feasible scheduling problem with n jobs. This approach yields faster algorithms for most of the scheduling problems discussed in this paper
Simulation of valveless micropump and mode analysis
In this work, a 3-D simulation is performed to study for the solid-fluid
coupling effect driven by piezoelectric materials and utilizes asymmetric
obstacles to control the flow direction. The result of simulation is also
verified. For a micropump, it is crucial to find the optimal working frequency
which produce maximum net flow rate. The PZT plate vibrates under the first
mode, which is symmetric. Adjusting the working frequency, the maximum flow
rate can be obtained. For the micrpump we studied, the optimal working
frequency is 3.2K Hz. At higher working frequency, say 20K Hz, the fluid-solid
membrane may come out a intermediate mode, which is different from the first
mode and the second mode. It is observed that the center of the mode drifts.
Meanwhile, the result shows that a phase shift lagging when the excitation
force exists in the vibration response. Finally, at even higher working
frequency, say 30K Hz, a second vibration mode is observed.Comment: Submitted on behalf of EDA Publishing Association
(http://irevues.inist.fr/EDA-Publishing
Induced Coherence and Stable Soliton Spiraling
We develop a theory of soliton spiraling in a bulk nonlinear medium and
reveal a new physical mechanism: periodic power exchange via induced coherence,
which can lead to stable spiraling and the formation of dynamical two-soliton
states. Our theory not only explains earlier observations, but provides a
number of predictions which are also verified experimentally. Finally, we show
theoretically and experimentally that soliton spiraling can be controled by the
degree of mutual initial coherence.Comment: 4 pages, 5 figure
Batalin-Vilkovisky Integrals in Finite Dimensions
The Batalin-Vilkovisky method (BV) is the most powerful method to analyze
functional integrals with (infinite-dimensional) gauge symmetries presently
known. It has been invented to fix gauges associated with symmetries that do
not close off-shell. Homological Perturbation Theory is introduced and used to
develop the integration theory behind BV and to describe the BV quantization of
a Lagrangian system with symmetries. Localization (illustrated in terms of
Duistermaat-Heckman localization) as well as anomalous symmetries are discussed
in the framework of BV.Comment: 35 page
d-Wave Pairing Correlation in the Two-Dimensional t-J Model
The pair-pair correlation function of the two-dimensional t-J model is
studied by using the power-Lanczos method and an assumption of monotonic
behavior. In comparison with the results of the ideal Fermi gas, we conclude
that the 2D t-J model does not have long range d-wave superconducting
correlation in the interesting parameter range of . Implications
of this result will also be discussed.Comment: 4 pages, 6 figures, accepted by PR
New high-efficiency source of photon pairs for engineering quantum entanglement
We have constructed an efficient source of photon pairs using a
waveguide-type nonlinear device and performed a two-photon interference
experiment with an unbalanced Michelson interferometer. Parametric
down-converted photons from the nonlinear device are detected by two detectors
located at the output ports of the interferometer. Because the interferometer
is constructed with two optical paths of different length, photons from the
shorter path arrive at the detector earlier than those from the longer path. We
find that the difference of arrival time and the time window of the coincidence
counter are important parameters which determine the boundary between the
classical and quantum regime. When the time window of the coincidence counter
is smaller than the arrival time difference, fringes of high visibility
(80 10%) were observed. This result is only explained by quantum theory
and is clear evidence for quantum entanglement of the interferometer's optical
paths.Comment: 4 pages, 4 figures, IQEC200
- …