Common Ravens

Damage Management Methods for Common Ravens Type of Control -- Available Management Options Exclusion -- Often ineffective or impractical Fertility Control -- None available Frightening Devices -- Effigies • Pyrotechnics and propane cannons • Lasers and flashing lights Habitat Modification -- Bale and bury garbage • Install dumpsters with secure lids • Remove or bury dead livestock • Remove abandoned houses, sheds, and barns to eliminate nesting structures Nest Treatment -- Allowed with proper Federal and State permits; Egg oiling or addling and nest destruction Repellents -- Methiocarb (EPA Reg. No. 56228-33) • Methyl anthranilate (food-grade grape flavoring agent) Shooting -- Allowed with proper Federal and State permits; Requires use of non-toxic/non-lead ammunition Toxicants -- Compound DRC-1339 Concentrate (EPA Reg. No. 56228-29, 56228-63); May only be used by USDA Wildlife Services employees or people working under their supervision. Trapping -- Allowed with proper Federal and State permits; Live-trapping with modified soft-catch #1½, #2 or #3 coil-spring trap

The aerodynamic challenges of the design and development of the space shuttle orbiter

The major aerodynamic design challenge at the beginning of the United States Space Transportation System (STS) research and development phase was to design a vehicle that would fly as a spacecraft during early entry and as an aircraft during the final phase of entry. The design was further complicated because the envisioned vehicle was statically unstable during a portion of the aircraft mode of operation. The second challenge was the development of preflight aerodynamic predictions with an accuracy consistent with conducting a manned flight on the initial orbital flight. A brief history of the early contractual studies is presented highlighting the technical results and management decisions influencing the aerodynamic challenges. The configuration evolution and the development of preflight aerodynamic predictions will be reviewed. The results from the first four test flights shows excellent agreement with the preflight aerodynamic predictions over the majority of the flight regimes. The only regimes showing significant disagreement is confined primarily to early entry, where prediction of the basic vehicle trim and the influence of the reaction control system jets on the flow field were found to be deficient. Postflight results are analyzed to explain these prediction deficiencies

Bond strength of adhesives to dentin contaminated with smoker\u27s saliva.

The purpose of this study was to determine the effects of contamination with smoker\u27s and non-smoker\u27s saliva on the bond strength of resin composite to superficial dentin using different adhesive systems. The interfacial structure between the resin and dentin was evaluated for each treatment using environmental scanning electron microscopy (ESEM). Freshly extracted human molars were ground with 600-grit SiC paper to expose the superficial dentin. Adhesives [One-Up-Bond-F-Plus (OUFP) and Adper-Prompt-L-Pop (APLP)] and resin composite (TPHSpectrum) were bonded to the dentin (n = 8/group, 180 total specimens) under five surface conditions: control (adhesive applied following manufacturers\u27 instructions); saliva, then 5-s air dry, then adhesive; adhesive, saliva, 5-s air dry; adhesive, saliva, 5-s water rinse, 5-s air dry (ASW group); and adhesive, saliva, 5-s water rinse, 5-s air dry, reapply adhesive (ASWA group). After storage in water at 37 degrees C for 24 h, the specimens were debonded under tension at a speed of 0.5 mm/min. ESEM photomicrographs of the dentin/adhesive interfaces were taken. Mean bond strength ranged from 8.1 to 24.1 MPa. Fisher\u27s protected least significant difference (P = 0.05) intervals for critical adhesive, saliva, and surface condition differences were 1.3, 1.3, and 2.1 MPa, respectively. There were no significant differences in bond strength to dentin between contamination by smoker\u27s and nonsmoker\u27s saliva, but bond strengths were significantly different between adhesive systems, with OUFP twice as strong as APLP under almost all conditions. After adhesive application and contamination with either smoker\u27s or nonsmoker\u27s saliva followed by washing and reapplication of the adhesive (ASWA group), the bond strength of both adhesive systems was the same as that of the control group

The effect of bed rest on various parameters of physiological function. part iii- bioinstrumentation

Bioinstrumentation system for cardiovascular measurements in tilt-table tests, and bedside monitoring during bedres

N-Methylimidazole Promotes The Reaction Of Homophthalic Anhydride With Imines

The addition of N-methylimidazole (NMI) to the reaction of homophthalic anhydride with imines such as pyridine-3-carboxaldehyde-N-trifluoroethylimine (9) reduces the amount of elimination byproduct and improves the yield of the formal cycloadduct, tetrahydroisoquinolonic carboxylate 10. Carboxanilides of such compounds are of interest as potential antimalarial agents. A mechanism that rationalizes the role of NMI is proposed, and a gram-scale procedure for the synthesis and resolution of 10 is also described

Impaired perception of facial motion in autism spectrum disorder

Copyright: © 2014 O’Brien et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.This article has been made available through the Brunel Open Access Publishing Fund.Facial motion is a special type of biological motion that transmits cues for socio-emotional communication and enables the discrimination of properties such as gender and identity. We used animated average faces to examine the ability of adults with autism spectrum disorders (ASD) to perceive facial motion. Participants completed increasingly difficult tasks involving the discrimination of (1) sequences of facial motion, (2) the identity of individuals based on their facial motion and (3) the gender of individuals. Stimuli were presented in both upright and upside-down orientations to test for the difference in inversion effects often found when comparing ASD with controls in face perception. The ASD group’s performance was impaired relative to the control group in all three tasks and unlike the control group, the individuals with ASD failed to show an inversion effect. These results point to a deficit in facial biological motion processing in people with autism, which we suggest is linked to deficits in lower level motion processing we have previously reported

Energetics and atomic mechanisms of dislocation nucleation in strained epitaxial layers

We study numerically the energetics and atomic mechanisms of misfit dislocation nucleation and stress relaxation in a two-dimensional atomistic model of strained epitaxial layers on a substrate with lattice misfit. Relaxation processes from coherent to incoherent states for different transition paths are studied using interatomic potentials of Lennard-Jones type and a systematic saddle point and transition path search method. The method is based on a combination of repulsive potential minimization and the Nudged Elastic Band method. For a final state with a single misfit dislocation, the minimum energy path and the corresponding activation barrier are obtained for different misfits and interatomic potentials. We find that the energy barrier decreases strongly with misfit. In contrast to continuous elastic theory, a strong tensile-compressive asymmetry is observed. This asymmetry can be understood as manifestation of asymmetry between repulsive and attractive branches of pair potential and it is found to depend sensitively on the form of the potential.Comment: 11 pages, 9 figures, to appear in Phys. Rev.

On two problems in graph Ramsey theory

We study two classical problems in graph Ramsey theory, that of determining the Ramsey number of bounded-degree graphs and that of estimating the induced Ramsey number for a graph with a given number of vertices. The Ramsey number r(H) of a graph H is the least positive integer N such that every two-coloring of the edges of the complete graph $K_N$ contains a monochromatic copy of H. A famous result of Chv\'atal, R\"{o}dl, Szemer\'edi and Trotter states that there exists a constant c(\Delta) such that r(H) \leq c(\Delta) n for every graph H with n vertices and maximum degree \Delta. The important open question is to determine the constant c(\Delta). The best results, both due to Graham, R\"{o}dl and Ruci\'nski, state that there are constants c and c' such that 2^{c' \Delta} \leq c(\Delta) \leq 2^{c \Delta \log^2 \Delta}. We improve this upper bound, showing that there is a constant c for which c(\Delta) \leq 2^{c \Delta \log \Delta}. The induced Ramsey number r_{ind}(H) of a graph H is the least positive integer N for which there exists a graph G on N vertices such that every two-coloring of the edges of G contains an induced monochromatic copy of H. Erd\H{o}s conjectured the existence of a constant c such that, for any graph H on n vertices, r_{ind}(H) \leq 2^{c n}. We move a step closer to proving this conjecture, showing that r_{ind} (H) \leq 2^{c n \log n}. This improves upon an earlier result of Kohayakawa, Pr\"{o}mel and R\"{o}dl by a factor of \log n in the exponent.Comment: 18 page

Immunogenetic studies of juvenile dermatomyositis

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/66141/1/j.1399-0039.1983.tb00371.x.pd