8,596 research outputs found
Sound radiation from randomly vibrating beams of finite circular cross section
The radiation of sound from vibrating cylindrical beams is analyzed based on the frequency of the beam vibrations and the physical characteristics of the beam and its surroundings. A statistical analysis of random beam vibrations allows this result to be independent of the boundary conditions at the ends of the beam. The acoustic power radiated by the beam can be determined from a knowledge of the frequency band vibration data without a knowledge of the individual modal vibration amplitudes. A practical example of the usefulness of this technique is provided by the application of the theoretical calculations to the prediction of the octave band acoustic power output of the picking sticks of an automatic textile loom. Calculations are made of the expected octave band sound pressure levels based on measured acceleration data. These theoretical levels are subsequently compared with actual sound pressure level measurements of loom noise
Applications of acoustics in the measurement of coal slab thickness
The determination of the possibility of employing acoustic waves at ultrasonic frequencies for measurements of thicknesses of slabs of coal backed by shale is investigated. Fundamental information concerning the acoustical properties of coal, and the relationship between these properties and the structural and compositional parameters used to characterize coal samples was also sought. The testing device, which utilizes two matched transducers, is described
High-fidelity simulation of an ultrasonic standing-wave thermoacoustic engine with bulk viscosity effects
We have carried out boundary-layer-resolved, unstructured fully-compressible
Navier--Stokes simulations of an ultrasonic standing-wave thermoacoustic engine
(TAE) model. The model is constructed as a quarter-wavelength engine,
approximately 4 mm by 4 mm in size and operating at 25 kHz, and comprises a
thermoacoustic stack and a coin-shaped cavity, a design inspired by Flitcroft
and Symko (2013). Thermal and viscous boundary layers (order of 10
m) are resolved. Vibrational and rotational molecular relaxation
are modeled with an effective bulk viscosity coefficient modifying the viscous
stress tensor. The effective bulk viscosity coefficient is estimated from the
difference between theoretical and semi-empirical attenuation curves.
Contributions to the effective bulk viscosity coefficient can be identified as
from vibrational and rotational molecular relaxation. The inclusion of the
coefficient captures acoustic absorption from infrasonic (10 Hz) to
ultrasonic (100 kHz) frequencies. The value of bulk viscosity depends on
pressure, temperature, and frequency, as well as the relative humidity of the
working fluid. Simulations of the TAE are carried out to the limit cycle, with
growth rates and limit-cycle amplitudes varying non-monotonically with the
magnitude of bulk viscosity, reaching a maximum for a relative humidity level
of 5%. A corresponding linear model with minor losses was developed; the linear
model overpredicts transient growth rate but gives an accurate estimate of
limit cycle behavior. An improved understanding of thermoacoustic energy
conversion in the ultrasonic regime based on a high-fidelity computational
framework will help to further improve the power density advantages of
small-scale thermoacoustic engines.Comment: 55th AIAA Aerospace Sciences Meeting, AIAA SciTech, 201
Miniature mobile sensor platforms for condition monitoring of structures
In this paper, a wireless, multisensor inspection system for nondestructive evaluation (NDE) of materials is described. The sensor configuration enables two inspection modes-magnetic (flux leakage and eddy current) and noncontact ultrasound. Each is designed to function in a complementary manner, maximizing the potential for detection of both surface and internal defects. Particular emphasis is placed on the generic architecture of a novel, intelligent sensor platform, and its positioning on the structure under test. The sensor units are capable of wireless communication with a remote host computer, which controls manipulation and data interpretation. Results are presented in the form of automatic scans with different NDE sensors in a series of experiments on thin plate structures. To highlight the advantage of utilizing multiple inspection modalities, data fusion approaches are employed to combine data collected by complementary sensor systems. Fusion of data is shown to demonstrate the potential for improved inspection reliability
Quantum Films Adsorbed on Graphite: Third and Fourth Helium Layers
Using a path-integral Monte Carlo method for simulating superfluid quantum
films, we investigate helium layers adsorbed on a substrate consisting of
graphite plus two solid helium layers. Our results for the promotion densities
and the dependence of the superfluid density on coverage are in agreement with
experiment. We can also explain certain features of the measured heat capacity
as a function of temperature and coverage.Comment: 13 pages in the Phys. Rev. two-column format, 16 Figure
Navigation/traffic control satellite mission study. Volume 3 - System concepts
Satellite network for air traffic control, solar flare warning, and collision avoidanc
Flux calibration of the AAO/UKST SuperCOSMOS H-alpha Survey
The AAO/UKST SuperCOSMOS H Survey (SHS) was, when completed in 2003,
a powerful addition to extant wide-field surveys. The combination of areal
coverage, spatial resolution and sensitivity in a narrow imaging band, still
marks it out today as an excellent resource for the astronomical community. The
233 separate fields are available online in digital form, with each field
covering 25 square degrees. The SHS has been the motivation for equivalent
surveys in the north, and new digital H surveys now beginning in the
south such as VPHAS+. It has been the foundation of many important discovery
projects with the Macquarie/AAO/Strasbourg H planetary nebula project
being a particularly successful example. However, the full potential of the SHS
has been hampered by lack of a clear route to acceptable flux calibration from
the base photographic data. We have determined the calibration factors for 170
individual SHS fields, and present a direct pathway to the measurement of
integrated H fluxes and surface brightnesses for resolved nebulae
detected in the SHS. We also include a catalogue of integrated H fluxes
for 100 planetary and other nebulae measured from the SHS, and use these
data to show that fluxes, accurate to 0.10 - 0.14 dex (25-35 per
cent), can be obtained from these fields. For the remaining 63 fields, a mean
calibration factor of 12.0 counts pix R can be used, allowing the
determination of reasonable integrated fluxes accurate to better than 0.2
dex (50 per cent). We outline the procedures involved and the caveats
that need to be appreciated in achieving such flux measurements. This paper
forms a handy reference source that will significantly increase the scientific
utility of the SHS.Comment: 14 pages, 12 figures, 2 tables (plus 7 pp. of supplementary online
information). Version to appear in MNRA
Wireless recording of the calls of Rousettus aegyptiacus and their reproduction using electrostatic transducers
Bats are capable of imaging their surroundings in great detail using echolocation. To apply similar methods to human engineering systems requires the capability to measure and recreate the signals used, and to understand the processing applied to returning echoes. In this work, the emitted and reflected echolocation signals of Rousettus aegyptiacus are recorded while the bat is in flight, using a wireless sensor mounted on the bat. The sensor is designed to replicate the acoustic gain control which bats are known to use, applying a gain to returning echoes that is dependent on the incurred time delay. Employing this technique allows emitted and reflected echolocation calls, which have a wide dynamic range, to be recorded. The recorded echoes demonstrate the complexity of environment reconstruction using echolocation. The sensor is also used to make accurate recordings of the emitted calls, and these calls are recreated in the laboratory using custom-built wideband electrostatic transducers, allied with a spectral equalization technique. This technique is further demonstrated by recreating multi-harmonic bioinspired FM chirps. The ability to record and accurately synthesize echolocation calls enables the exploitation of biological signals in human engineering systems for sonar, materials characterization and imaging
- …