1,437 research outputs found
The Complexity of Repairing, Adjusting, and Aggregating of Extensions in Abstract Argumentation
We study the computational complexity of problems that arise in abstract
argumentation in the context of dynamic argumentation, minimal change, and
aggregation. In particular, we consider the following problems where always an
argumentation framework F and a small positive integer k are given.
- The Repair problem asks whether a given set of arguments can be modified
into an extension by at most k elementary changes (i.e., the extension is of
distance k from the given set).
- The Adjust problem asks whether a given extension can be modified by at
most k elementary changes into an extension that contains a specified argument.
- The Center problem asks whether, given two extensions of distance k,
whether there is a "center" extension that is a distance at most (k-1) from
both given extensions.
We study these problems in the framework of parameterized complexity, and
take the distance k as the parameter. Our results covers several different
semantics, including admissible, complete, preferred, semi-stable and stable
semantics
Moderate Resolution Spectroscopy For The Space Infrared Telescope Facility (SIRTF)
A conceptual design for an infrared spectrometer capable of both low resolution (λ/Δ-λ = 50; 2.5-200 microns) and moderate resolution (1000; 4-200 microns) and moderate resolution (1000; 4-200 microns) has been developed. This facility instrument will permit the spectroscopic study in the infrared of objects ranging from within the solar system to distant galaxies. The spectroscopic capability provided by this instrument for SIRTF will give astronomers orders of magnitude greater sensitivity for the study of faint objects than had been previously available. The low resolution mode will enable detailed studies of the continuum radiation. The moderate resolution mode of the instrument will permit studies of a wide range of problems, from the infrared spectral signatures of small outer solar system bodies such as Pluto and the satellites of the giant planets, to investigations of more luminous active galaxies and QS0s at substantially greater distances. A simple design concept has been developed for the spectrometer which supports the science investigation with practical cryogenic engineering. Operational flexibility is preserved with a minimum number of mechanisms. The five modules share a common aperture, and all gratings share a single scan mechanism. High reliability is achieved through use of flight-proven hardware concepts and redundancy. The design controls the heat load into the SIRTF cryogen, with all heat sources other than the detectors operating at 7K and isolated from the 4K cold station. Two-dimensional area detector arrays are used in the 2.5-120μm bands to simultaneously monitor adjacent regions in extended objects and to measure the background near point sources
Buttressing staples with cholecyst-derived extracellular matrix (CEM) reinforces staple lines in an ex vivo peristaltic inflation model
This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ Springer Science + Business Media, LLC 2008Background - Staple line leakage and bleeding are the most common problems associated with the use of surgical staplers for gastrointestinal resection and anastomotic procedures. These complications can be reduced by reinforcing the staple lines with buttressing materials. The current study reports the potential use of cholecyst-derived extracellular matrix (CEM) in non-crosslinked (NCEM) and crosslinked (XCEM) forms, and compares their mechanical performance with clinically available buttress materials [small intestinal submucosa (SIS) and bovine pericardium (BP)] in an ex vivo small intestine model.
Methods - Three crosslinked CEM variants (XCEM0005, XCEM001, and XCEM0033) with different degree of crosslinking were produced. An ex vivo peristaltic inflation model was established. Porcine small intestine segments were stapled on one end, using buttressed or non-buttressed surgical staplers. The opened, non-stapled ends were connected to a peristaltic pump and pressure transducer and sealed. The staple lines were then exposed to increased intraluminal pressure in a peristaltic manner. Both the leak and burst pressures of the test specimens were recorded.
Results - The leak pressures observed for non-crosslinked NCEM (137.8 ± 22.3 mmHg), crosslinked XCEM0005 (109.1 ± 14.1 mmHg), XCEM001 (150.1 ± 16.0 mmHg), XCEM0033 (98.8 ± 10.5 mmHg) reinforced staple lines were significantly higher when compared to non-buttressed control (28.3 ± 10.8 mmHg) and SIS (one and four layers) (62.6 ± 11.8 and 57.6 ± 12.3 mmHg, respectively) buttressed staple lines. NCEM and XCEM were comparable to that observed for BP buttressed staple lines (138.8 ± 3.6 mmHg). Only specimens with reinforced staple lines were able to achieve high intraluminal pressures (ruptured at the intestinal mesentery), indicating that buttress reinforcements were able to withstand pressure higher than that of natural tissue (physiological failure).
Conclusions - These findings suggest that the use of CEM and XCEM as buttressing materials is associated with reinforced staple lines and increased leak pressures when compared to non-buttressed staple lines. CEM and XCEM were found to perform comparably with clinically available buttress materials in this ex vivo model.Enterprise Irelan
Long term microparticle impact fluxes on LDEF determined from optical survey of Interplanetary Dust Experiment (IDE) sensors
Many of the IDE metal-oxide-silicon (MOS) capacitor-discharge impact sensors remained active during the entire Long Duration Exposure Facility (LDEF) mission. An optical survey of impact sites on the active surfaces of these sensors has been extended to include all sensors from the low-flux sides of LDEF (i.e. the west or trailing side, the earth end, and the space end) and 5-7 active sensors from each LDEF's high-flux sides (i.e. the east or leading side, the south side, and the north side). This survey was facilitated by the presence of a relatively large (greater than 50 micron diameter) optical signature associated with each impact site on the active sensor surfaces. Of the approximately 4700 impacts in the optical survey data set, 84% were from particles in the 0.5 to 3 micron size range. An estimate of the total number of hypervelocity impacts on LDEF from particles greater than 0.5 micron diameter yields a value of approximately 7 x 10(exp 6). Impact feature dimensions for several dozen large craters on MOS sensors and germanium witness plates are also presented. Impact fluxes calculated from the IDE survey data closely matched surveys of similar size impacts (greater than or equal to 3 micron diameter craters in Al, or marginal penetrations of a 2.4 micron thick Al foil) by other LDEF investigators. Since the first year IDE data were electronically recorded, the flux data could be divided into three long term time periods: the first year, the entire 5.8 year mission, and the intervening 4.8 years (by difference). The IDE data show that there was an order of magnitude decrease in the long term microparticle impact flux on the trailing side of LDEF, from 1.01 to 0.098 x 10(exp -4) m(exp 2)/s, from the first year in orbit compared to years 2-6. The long term flux on the leading edge showed an increase from 8.6 to 11.2 x 10(exp -4) m(exp -2)/s over this same time period. (Short term flux increases up to 10,000 times the background rate were recorded on the leading side during LDEF's first year in orbit.) The overall east/west ratio was 44, but during LDEF's first year in orbit the ratio was 8.5, and during years 2-6 the ratio was 114. Long term microparticle impact fluxes on the space end decreased from 1.12 to 0.55 x 10(exp -4) m(exp -2)/s from the first year in orbit compared to years 2-6. The earth end showed the opposite trend with an increase from 0.16 to 0.38 x 10(exp -4) m(exp -2)/s. Fluxes on rows 6 and 12 decreased from 6.1 to 3.4 and 6.7 to 3.7 x 10(exp -4) m(exp -2)/s, respectively, over the same time periods. This resulted in space/earth microparticle impact flux ratios of 7.1 during the first year and 1.5 during years 2-6, while the south/north, space/north and space/south ratios remained constant at 1.1, 0.16 and 0.17, respectively, during the entire mission. This information indicates the possible identification of long term changes in discrete microparticle orbital debris component contributions to the total impact flux experienced by LDEF. A dramatic decrease in the debris population capable of striking the trailing side was detected that could possibly be attributed to the hiatus of western launch activity experienced from 1986-1989. A significant increase in the debris population that preferentially struck the leading side was also observed and could possibly be attributed to a single breakup event that occurred in September of 1986. A substantial increase in the microparticle debris population that struck the earth end of LDEF, but not the space end, was also detected and could possibly be the result of a single breakup event at low altitude. These results point to the importance of including discrete orbital debris component contribution changes in flux models in order to achieve accurate predictions of the microparticle environment that a particular spacecraft will experience in earth orbit. The only reliable, verified empirical measurements of these changes are reported in this paper. Further time-resolved in-situ measurements of these debris populations are needed to accurately assess model predictions and mitigation practices
Co-phasing the Large Binocular Telescope: status and performance of LBTI/PHASECam
The Large Binocular Telescope Interferometer is a NASA-funded nulling and
imaging instrument designed to coherently combine the two 8.4-m primary mirrors
of the LBT for high-sensitivity, high-contrast, and high-resolution infrared
imaging (1.5-13 um). PHASECam is LBTI's near-infrared camera used to measure
tip-tilt and phase variations between the two AO-corrected apertures and
provide high-angular resolution observations. We report on the status of the
system and describe its on-sky performance measured during the first semester
of 2014. With a spatial resolution equivalent to that of a 22.8-meter telescope
and the light-gathering power of single 11.8-meter mirror, the co-phased LBT
can be considered to be a forerunner of the next-generation extremely large
telescopes (ELT).Comment: 8 pages, 5 figures, SPIE Conference proceeding
Phenotypic relationships between docility and reproduction in Angus heifers
Citation: White, K. L., Bormann, J. M., Olson, K. C., Jaeger, J. R., Johnson, S., Downey, B., . . . Weaber, R. L. (2016). Phenotypic relationships between docility and reproduction in Angus heifers. Journal of Animal Science, 94(2), 483-489. doi:10.2527/jas2015-9327The objective of this study was to elucidate the phenotypic relationships between docility and first-service AI conception rate in heifers. Data (n = 337) collected from 3 cooperator herds in Kansas at the start of synchronization protocol included exit velocity (EV), chute score (CS), fecal cortisol (FC), and blood serum cortisol (BC). Data were analyzed using logistic regression with 30-d pregnancy rate as the dependent variable. The model included the fixed effect of contemporary group and the covariates FC, BC, EV, CS, BW, and age. Correlation coefficients were calculated between all continuous traits. Pregnancy rate ranged from 34% to 60% between herds. Blood cortisol positively correlated with EV (r = 0.22, P < 0.01), negatively correlated with age (r = -0.12, P < 0.03), and tended to be negatively correlated with BW (r = -0.10, P = 0.09). Exit velocity was positively correlated with CS (r = 0.24, P < 0.01) and negatively correlated with BW (r = -0.15, P < 0.01) and age (r = -0.12, P < 0.03). Chute score negatively correlated with age (r = -0.14, P < 0.01), and age and BW were moderately positively correlated (r = 0.42, P < 0.01), as expected. Older, heavier animals generally had better temperament, as indicated by lower BC, EV, and CS. The power of our test could detect no significant predictors of 30-d pregnancy for the combined data from all ranches. When the data were divided by ranch, CS (P < 0.03) and BW (P < 0.01) were both significant predictors for 30-d pregnancy for ranch 1. The odds ratio estimate for CS has an inverse relationship with pregnancy, meaning that a 1-unit increase in average CS will reduce the probability of pregnancy at ranch 1 by 48.1%. Weight also has a negative impact on pregnancy because a 1-kg increase in BW will decrease the probability of pregnancy by 2.2%. Fertility is a complex trait that depends on many factors; our data suggest that docility is 1 factor that warrants further investigation
First-light LBT nulling interferometric observations: warm exozodiacal dust resolved within a few AU of eta Corvi
We report on the first nulling interferometric observations with the Large
Binocular Telescope Interferometer (LBTI), resolving the N' band (9.81 - 12.41
um) emission around the nearby main-sequence star eta Crv (F2V, 1-2 Gyr). The
measured source null depth amounts to 4.40% +/- 0.35% over a field-of-view of
140 mas in radius (~2.6\,AU at the distance of eta Corvi) and shows no
significant variation over 35{\deg} of sky rotation. This relatively low null
is unexpected given the total disk to star flux ratio measured by Spitzer/IRS
(~23% across the N' band), suggesting that a significant fraction of the dust
lies within the central nulled response of the LBTI (79 mas or 1.4 AU).
Modeling of the warm disk shows that it cannot resemble a scaled version of the
Solar zodiacal cloud, unless it is almost perpendicular to the outer disk
imaged by Herschel. It is more likely that the inner and outer disks are
coplanar and the warm dust is located at a distance of 0.5-1.0 AU,
significantly closer than previously predicted by models of the IRS spectrum
(~3 AU). The predicted disk sizes can be reconciled if the warm disk is not
centrosymmetric, or if the dust particles are dominated by very small grains.
Both possibilities hint that a recent collision has produced much of the dust.
Finally, we discuss the implications for the presence of dust at the distance
where the insolation is the same as Earth's (2.3 AU).Comment: 9 pages, 6 figures, accepted for publication in Ap
L'-band AGPM vector vortex coronagraph's first light on LBTI/LMIRCam
We present the first observations obtained with the L'-band AGPM vortex
coronagraph recently installed on LBTI/LMIRCam. The AGPM (Annular Groove Phase
Mask) is a vector vortex coronagraph made from diamond subwavelength gratings.
It is designed to improve the sensitivity and dynamic range of high-resolution
imaging at very small inner working angles, down to 0.09 arcseconds in the case
of LBTI/LMIRCam in the L' band. During the first hours on sky, we observed the
young A5V star HR\,8799 with the goal to demonstrate the AGPM performance and
assess its relevance for the ongoing LBTI planet survey (LEECH). Preliminary
analyses of the data reveal the four known planets clearly at high SNR and
provide unprecedented sensitivity limits in the inner planetary system (down to
the diffraction limit of 0.09 arcseconds).Comment: 9 pages, 4 figures, SPIE proceeding
Moderate Resolution Spectroscopy For The Space Infrared Telescope Facility (SIRTF)
A conceptual design for an infrared spectrometer capable of both low resolution (λ/Δ-λ = 50; 2.5-200 microns) and moderate resolution (1000; 4-200 microns) and moderate resolution (1000; 4-200 microns) has been developed. This facility instrument will permit the spectroscopic study in the infrared of objects ranging from within the solar system to distant galaxies. The spectroscopic capability provided by this instrument for SIRTF will give astronomers orders of magnitude greater sensitivity for the study of faint objects than had been previously available. The low resolution mode will enable detailed studies of the continuum radiation. The moderate resolution mode of the instrument will permit studies of a wide range of problems, from the infrared spectral signatures of small outer solar system bodies such as Pluto and the satellites of the giant planets, to investigations of more luminous active galaxies and QS0s at substantially greater distances. A simple design concept has been developed for the spectrometer which supports the science investigation with practical cryogenic engineering. Operational flexibility is preserved with a minimum number of mechanisms. The five modules share a common aperture, and all gratings share a single scan mechanism. High reliability is achieved through use of flight-proven hardware concepts and redundancy. The design controls the heat load into the SIRTF cryogen, with all heat sources other than the detectors operating at 7K and isolated from the 4K cold station. Two-dimensional area detector arrays are used in the 2.5-120μm bands to simultaneously monitor adjacent regions in extended objects and to measure the background near point sources
- …