Hollow cathodes with BaO impregnated, porous tungsten inserts and tips

The technology of impregnated materials is described and some inherently advantageous characteristics of impregnated cathodes are discussed. Thermionic emission measurements are presented for oxide coated and impregnated cathodes. Five cathode configurations with barium oxide impregnated porous tungsten inserts and/or tips have been fabricated and tested. Reliability, durability, and stability of operation are characterized. One of the cathodes has accumulated over 9000 operational hours, another has been cycled on and off more than 800 times

Optical properties of ion beam textured metals

Copper, silicon, aluminum, titanium and 316 stainless steel were textured by 1000 eV xenon ions from an 8 cm diameter electron bombardment ion source. Simultaneously sputter-deposited tantalum was used to facilitate the development of the surface microstructure. Scanning electron microscopy of the ion textured surfaces revealed two types of microstructure. Copper, silicon, and aluminum developed a cone structure with an average peak-to-peak distance ranging from 1 micron for silicon to 6 microns for aluminum. Titanium and 316 stainless steel developed a serpentine ridge structure. The average peak-to-peak distance for both of these materials was 0.5 micron. Spectral reflectance was measured using an integrating sphere and a holraum reflectometer. Total reflectance for air mass 0 and 2, solar absorptance and total emittance normalized for a 425 K black body were calculated from the reflectance measurements

Status of a five-centimeter-diameter ion thruster technology program

Prototype auxiliary propulsion subsystem with isolated single tank propellant feed system and 5-cm-diameter ion thruste

Topsoil Selling - extreme anthropogenic erosion and its consequences for paddy soil quality (Mekong Delta, Vietnam)

Increasing urbanization and industrialization leads to rising demands for construction material, particularly in low-income countries. Thus, agricultural topsoil is sometimes removed and used as raw material e.g. for brick production. Topsoil selling (TSS) is practiced around the world from America, Europe, and Afrika to Asia. In the Mekong, Delta farmers sell the topsoil from their paddy fields to contractors. The temporal effects of topsoil removal on soil quality are not yet fully understood. We hypothesized that after soil removal, soil quality is significantly lower compared to the original topsoil. To test this hypothesis, we sampled paddy soil chronosequences in two different provinces, ranging between 1 and 8 years after TSS. Soil organic carbon (Corg) stocks at TSS sites were up to 20 t/ha lower than at control sites (control: 50 t/ha) in Sóc Trăng and up to 15 t/ha lower in Trà Vinh (control: 30 t/ha). The C/N ratio was nearly constant around 10. Analysis of inorganic nutrients (e.g. P, K, Na, S, Zn, Cu) showed that changes are variable in space, time and among nutrients. Annual average changes ranged from less than a kg per hectare and year for micronutrients (e.g. Cu, Zn) to several tens and hundreds of kg for macronutrients (e.g. P, S). The so far available data revealed that TSS induces mainly a dramatic loss of soil organic matter. It was ongoing up to the 8th year of the chronosequences but was not necessarily accompanied by losses in inorganic nutrients. As a result, there appears to be a chance for farmers in the Mekong Delta to overcome risks of soil quality decline after topsoil removal. Within the next months, we will receive the results from P- and S fractionation and also results from lignin analysis (lignin-derived phenols) will complement to the available data. Thus, we will gain further insights into soil evolution after topsoil selling shortly

The Role of Deontic Logic in the Specification of Information Systems

In this paper we discuss the role that deontic logic plays in the specification of information systems, either because constraints on the systems directly concern norms or, and even more importantly, system constraints are considered ideal but violable (so-called `soft¿ constraints).\ud To overcome the traditional problems with deontic logic (the so-called paradoxes), we first state the importance of distinguishing between ought-to-be and ought-to-do constraints and next focus on the most severe paradox, the so-called Chisholm paradox, involving contrary-to-duty norms. We present a multi-modal extension of standard deontic logic (SDL) to represent the ought-to-be version of the Chisholm set properly. For the ought-to-do variant we employ a reduction to dynamic logic, and show how the Chisholm set can be treated adequately in this setting. Finally we discuss a way of integrating both ought-to-be and ought-to-do reasoning, enabling one to draw conclusions from ought-to-be constraints to ought-to-do ones, and show by an example the use(fulness) of this

Lectures on F-theory compactifications and model building

These lecture notes are devoted to formal and phenomenological aspects of F-theory. We begin with a pedagogical introduction to the general concepts of F-theory, covering classic topics such as the connection to Type IIB orientifolds, the geometry of elliptic fibrations and the emergence of gauge groups, matter and Yukawa couplings. As a suitable framework for the construction of compact F-theory vacua we describe a special class of Weierstrass models called Tate models, whose local properties are captured by the spectral cover construction. Armed with this technology we proceed with a survey of F-theory GUT models, aiming at an overview of basic conceptual and phenomenological aspects, in particular in connection with GUT breaking via hypercharge flux.Comment: Invited contribution to the proceedings of the CERN Winter School on Supergravity, Strings and Gauge Theory 2010, to appear in Classical and Quantum Gravity; 63 pages; v2: references added, typos correcte