Phonon scattering mechanisms in suspended nanostructures from 4 to 40 K

We have developed specially designed semiconductor devices for the measurement of thermal conductance in suspended nanostructures. By means of a novel subtractive comparison, we are able to deduce the phonon thermal conductance of individual nanoscale beams of different geometry and dopant profiles. The separate roles of important phonon scattering mechanisms are analyzed and a quantitative estimation of their respective scattering rates is obtained using the Callaway model. Diffuse surface scattering proves to be particularly important in the temperature range from 4 to 40 K. The rates of other scattering mechanisms, arising from phonon-phonon, phonon-electron, and phonon-point defect interactions, also appear to be significantly higher in nanostructures than in bulk samples

Nanoscale, Phonon-Coupled Calorimetry with Sub-Attojoule/Kelvin Resolution

We have developed an ultrasensitive nanoscale calorimeter that enables heat capacity measurements upon minute, externally affixed (phonon-coupled) samples at low temperatures. For a 5 s measurement at 2 K, we demonstrate an unprecedented resolution of ΔC ~ 0.5 aJ/K (~36 000 k_B). This sensitivity is sufficient to enable heat capacity measurements upon zeptomole-scale samples or upon adsorbates with sub-monolayer coverage across the minute cross sections of these devices. We describe the fabrication and operation of these devices and demonstrate their sensitivity by measuring an adsorbed ^4He film with optimum resolution of ~3 × 10^(-5) monolayers upon an active surface area of only ~1.2 × 10^(-9) m^2

High-sensitivity microfluidic calorimeters for biological and chemical applications

High-sensitivity microfluidic calorimeters raise the prospect of achieving high-throughput biochemical measurements with minimal sample consumption. However, it has been challenging to realize microchip-based calorimeters possessing both high sensitivity and precise sample-manipulation capabilities. Here, we report chip-based microfluidic calorimeters capable of characterizing the heat of reaction of 3.5-nL samples with 4.2-nW resolution. Our approach, based on a combination of hard- and soft-polymer microfluidics, provides both exceptional thermal response and the physical strength necessary to construct high-sensitivity calorimeters that can be scaled to automated, highly multiplexed array architectures. Polydimethylsiloxane microfluidic valves and pumps are interfaced to parylene channels and reaction chambers to automate the injection of analyte at 1 nL and below. We attained excellent thermal resolution via on-chip vacuum encapsulation, which provides unprecedented thermal isolation of the minute microfluidic reaction chambers. We demonstrate performance of these calorimeters by resolving measurements of the heat of reaction of urea hydrolysis and the enthalpy of mixing of water with methanol. The device structure can be adapted easily to enable a wide variety of other standard calorimeter operations; one example, a flow calorimeter, is described

Calculation of nanowire thermal conductivity using complete phonon dispersion relations

The lattice thermal conductivity of crystalline Si nanowires is calculated. The calculation uses complete phonon dispersions, and does not require any externally imposed frequency cutoffs. No adjustment to nanowire thermal conductivity measurements is required. Good agreement with experimental results for nanowires wider than 35 nm is obtained. A formulation in terms of the transmission function is given. Also, the use of a simpler, nondispersive "Callaway formula", is discussed from the complete dispersions perspective.Comment: 4 pages, 3 figures. Accepted in Phys. Rev.

Thermopower of a 2D electron gas in suspended AlGaAs/GaAs heterostructures

We present thermopower measurements on a high electron mobility two-dimensional electron gas (2DEG) in a thin suspended membrane.We show that the small dimension of the membrane substantially reduces the thermal conductivity compared to bulk material so that it is possible to establish a strong thermal gradient along the 2DEG even at a distance of few micrometers. We find that the zero-field thermopower is significantly affected by the micro patterning. In contrast to 2DEGs incorporated in a bulk material, the diffusion contribution to the thermopower stays dominant up to a temperature of 7 K until the phonon-drag becomes strong and governs the run of the thermopower. We also find that the coupling between electrons and phonons in the phonon-drag regime is due to screened deformation potentials, in contrast to piezoelectric coupling found with bulk phonons.Comment: 7 page

Atopic dermatitis and role of Relizema: a multi-country user experience

Atopic dermatitis (AD) is characterized by itching or pruritus, erythematous lesions, pruritus, and a skin barrier defect. Repeated scratching can trigger the itch-scratch cycle. Itching is associated with an adverse impact on quality of life. The first-line treatment of AD includes the use of topical corticosteroids for atopic dermatitis. However, parents of children with atopic dermatitis are often reluctant to accept the use of topical corticosteroids due to their concern of adverse effects flare-up. Relizema™ cream is a prescription emollient device (PED) multi-ingredients moisturizer formulation that has been indicated for the treatment of signs and symptoms of dermatitis. It is approved as medical device (MD) class IIa in Europe and it is registered as a topical medical device in countries of Asia Pacific. A consensus meeting of 9 dermatologists from multiple countries in Asia Pacific region treating atopic dermatitis was conducted. The dermatologists presented their cases of atopic dermatitis. PED was reported by patients to offer good relief of symptoms and improve skin softness unlike other moisturizers. In fact, a few patients reported relief with Relizema™ cream after using other moisturizers which were not demonstrating clinical effectiveness. Patients reported they noticed a softness in their skin after the application of the PED. PED was effective even in patients with lichenified skin. The formulation which is enriched with antioxidants helped relieve eczema. Due to its steroid-free formulation, the PED can be continued as a part of long-term maintenance treatment to maintain healthy skin conditions, prolong remission, and prevent recurrence

S-, P- and D-wave resonances in positronium-sodium and positronium-potassium scattering

Scattering of positronium (Ps) by sodium and potassium atoms has been investigated employing a three-Ps-state coupled-channel model with Ps(1s,2s,2p) states using a time-reversal-symmetric regularized electron-exchange model potential fitted to reproduce accurate theoretical results for PsNa and PsK binding energies. We find a narrow S-wave singlet resonance at 4.58 eV of width 0.002 eV in the Ps-Na system and at 4.77 eV of width 0.003 eV in the Ps-K system. Singlet P-wave resonances in both systems are found at 5.07 eV of width 0.3 eV. Singlet D-wave structures are found at 5.3 eV in both systems. We also report results for elastic and Ps-excitation cross sections for Ps scattering by Na and K.Comment: 9 pages, 5 figures, Accepted in Journal of Physics

Isolation of a euryhaline microalgal strain, Tetraselmis sp CTP4, as a robust feedstock for biodiesel production

Bioprospecting for novel microalgal strains is key to improving the feasibility of microalgae-derived biodiesel production. Tetraselmis sp. CTP4 (Chlorophyta, Chlorodendrophyceae) was isolated using fluorescence activated cell sorting (FACS) in order to screen novel lipid-rich microalgae. CTP4 is a robust, euryhaline strain able to grow in seawater growth medium as well as in non-sterile urban wastewater. Because of its large cell size (9-22 mu m), CTP4 settles down after a six-hour sedimentation step. This leads to a medium removal efficiency of 80%, allowing a significant decrease of biomass dewatering costs. Using a two-stage system, a 3-fold increase in lipid content (up to 33% of DW) and a 2-fold enhancement in lipid productivity (up to 52.1 mg L-1 d(-1)) were observed upon exposure to nutrient depletion for 7 days. The biodiesel synthesized from the lipids of CTP4 contained high levels of oleic acid (25.67% of total fatty acids content) and minor amounts of polyunsaturated fatty acids with >= 4 double bonds (< 1%). As a result, this biofuel complies with most of the European (EN14214) and American (ASTM D6751) specifications, which commonly used microalgal feedstocks are usually unable to meet. In conclusion, Tetraselmis sp. CTP4 displays promising features as feedstock with lower downstream processing costs for biomass dewatering and biodiesel refining