Report of preliminary analysis of data from dew-point hygrometer profiles during the ARM 1996 WVIOP

Unique commercial light-weight chilled-mirror dew-point sensors were flown on tethered balloons during the Water Vapor Intensive Operation Period (WVIOP) in September 1996. Comparisons were made between in situ and remote sensing instruments that detect water vapor. We obtained a special waiver to fly the sensors up to 1 km both day and night from the FAA. Preliminary comparisons with tower mounted, surface-based temperature/relative humidity probes, rawinsonde, air-borne chilled-mirror dew point, and Raman lidar profiles are included. Profiles during nocturnal boundary layer wind jet occurrences are presented as special cases along with balloon-borne nephelometer light scattering profile comparisons

Si microwire-array solar cells

Si microwire-array solar cells with Air Mass 1.5 Global conversion efficiencies of up to 7.9% have been fabricated using an active volume of Si equivalent to a 4 μm thick Si wafer. These solar cells exhibited open-circuit voltages of 500 mV, short-circuit current densities (J_(sc)) of up to 24 mA cm^(-2), and fill factors >65% and employed Al_2O_3 dielectric particles that scattered light incident in the space between the wires, a Ag back reflector that prevented the escape of incident illumination from the back surface of the solar cell, and an a-SiN_x:H passivation/anti-reflection layer. Wire-array solar cells without some or all of these design features were also fabricated to demonstrate the importance of the light-trapping elements in achieving a high J_(sc). Scanning photocurrent microscopy images of the microwire-array solar cells revealed that the higher J_(sc) of the most advanced cell design resulted from an increased absorption of light incident in the space between the wires. Spectral response measurements further revealed that solar cells with light-trapping elements exhibited improved red and infrared response, as compared to solar cells without light-trapping elements

Continuous Uniform Finite Time Stabilization of Planar Controllable Systems

Continuous homogeneous controllers are utilized in a full state feedback setting for the uniform finite time stabilization of a perturbed double integrator in the presence of uniformly decaying piecewise continuous disturbances. Semiglobal strong $\mathcal{C}^1$ Lyapunov functions are identified to establish uniform asymptotic stability of the closed-loop planar system. Uniform finite time stability is then proved by extending the homogeneity principle of discontinuous systems to the continuous case with uniformly decaying piecewise continuous nonhomogeneous disturbances. A finite upper bound on the settling time is also computed. The results extend the existing literature on homogeneity and finite time stability by both presenting uniform finite time stabilization and dealing with a broader class of nonhomogeneous disturbances for planar controllable systems while also proposing a new class of homogeneous continuous controllers

Emergency Care Handover (ECHO study) across care boundaries : the need for joint decision making and consideration of psychosocial history

Background: Inadequate handover in emergency care is a threat to patient safety. Handover across care boundaries poses particular problems due to different professional, organisational and cultural backgrounds. While there have been many suggestions for standardisation of handover content, relatively little is known about the verbal behaviours that shape handover conversations. This paper explores both what is communicated (content) and how this is communicated (verbal behaviours) during different types of handover conversations across care boundaries in emergency care. Methods: Three types of interorganisational (ambulance service to emergency department (ED) in ‘resuscitation’ and ‘majors’ areas) and interdepartmental handover conversations (referrals to acute medicine) were audio recorded in three National Health Service EDs. Handover conversations were segmented into utterances. Frequency counts for content and language forms were derived for each type of handover using Discourse Analysis. Verbal behaviours were identified using Conversation Analysis. Results: 203 handover conversations were analysed. Handover conversations involving ambulance services were predominantly descriptive (60%–65% of utterances), unidirectional and focused on patient presentation (75%–80%). Referrals entailed more collaborative talk focused on the decision to admit and immediate care needs. Across all types of handover, only 1.5%–5% of handover conversation content related to the patient's social and psychological needs. Conclusions: Handover may entail both descriptive talk aimed at information transfer and collaborative talk aimed at joint decision-making. Standardisation of handover needs to accommodate collaborative aspects and should incorporate communication of information relevant to the patient's social and psychological needs to establish appropriate care arrangements at the earliest opportunity

Uptake routes and toxicokinetics of silver nanoparticles and silver ions in the earthworm Lumbricus rubellus

Current bioavailability models, such as the free ion activity model and biotic ligand model, explicitly consider that metal exposure will be mainly to the dissolved metal in ionic form. With the rise of nanotechnology products and the increasing release of metal-based nanoparticles (NPs) to the environment, such models may increasingly be applied to support risk assessment. It is not immediately clear, however, whether the assumption of metal ion exposure will be relevant for NPs. Using an established approach of oral gluing, a toxicokinetics study was conducted to investigate the routes of silver nanoparticles (AgNPs) and Ag+ ion uptake in the soil-dwelling earthworm Lumbricus rubellus. The results indicated that a significant part of the Ag uptake in the earthworms is through oral/gut uptake for both Ag+ ions and NPs. Thus, sealing the mouth reduced Ag uptake by between 40% and 75%. An X-ray analysis of the internal distribution of Ag in transverse sections confirmed the presence of increased Ag concentrations in exposed earthworm tissues. For the AgNPs but not the Ag+ ions, high concentrations were associated with the gut wall, liver-like chloragogenous tissue, and nephridia, which suggest a pathway for AgNP uptake, detoxification, and excretion via these organs. Overall, the results indicate that Ag in the ionic and NP forms is assimilated and internally distributed in earthworms and that this uptake occurs predominantly via the gut epithelium and less so via the body wall. The importance of oral exposure questions the application of current metal bioavailability models, which implicitly consider that the dominant route of exposure is via the soil solution, for bioavailability assessment and modeling of metal-based NPs

Energy-Conversion Properties of Vapor-Liquid-Solid–Grown Silicon Wire-Array Photocathodes

Silicon wire arrays, though attractive materials for use in photovoltaics and as photocathodes for hydrogen generation, have to date exhibited poor performance. Using a copper-catalyzed, vapor-liquid-solid–growth process, SiCl_4 and BCl_3 were used to grow ordered arrays of crystalline p-type silicon (p-Si) microwires on p^+-Si(111) substrates. When these wire arrays were used as photocathodes in contact with an aqueous methyl viologen^(2+/+) electrolyte, energy-conversion efficiencies of up to 3% were observed for monochromatic 808-nanometer light at fluxes comparable to solar illumination, despite an external quantum yield at short circuit of only 0.2. Internal quantum yields were at least 0.7, demonstrating that the measured photocurrents were limited by light absorption in the wire arrays, which filled only 4% of the incident optical plane in our test devices. The inherent performance of these wires thus conceptually allows the development of efficient photovoltaic and photoelectrochemical energy-conversion devices based on a radial junction platform