A Class of Transformations for Box‐Jenkins Seasonal Models

Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/147030/1/rssc00953.pd

Statistical quality control applied to a telemetry system acceptance prodedure Technical report no. 13

Statistical quality control applied to telemetry system acceptance procedur

Influence of Finite Span and Sweep on Active Flow Control Efficacy

Active flow control efficacy was investigated by means of leading-edge and flap-shoulder zero mass-flux blowing slots on a semispan wing model that was tested in unswept (standard) and swept configurations. On the standard configuration, stall commenced inboard, but with sweep the wing stalled initially near the tip. On both configurations, leading-edge perturbations increased CL,max and post stall lift, both with and without deflected flaps. Without sweep, the effect of control was approximately uniform across the wing span but remained effective to high angles of attack near the tip; when sweep was introduced a significant effect was noted inboard, but this effect degraded along the span and produced virtually no meaningful lift enhancement near the tip, irrespective of the tip configuration. In the former case, control strengthened the wingtip vortex; in the latter case, a simple semi-empirical model, based on the trajectory or "streamline" of the evolving perturbation, served to explain the observations. In the absence of sweep, control on finite-span flaps did not differ significantly from their nominally twodimensional counterpart. Control from the flap produced expected lift enhancement and CL,max improvements in the absence of sweep, but these improvements degraded with the introduction of sweep

Using keystroke logging to understand writers’ processes on a reading-into-writing test

Background Integrated reading-into-writing tasks are increasingly used in large-scale language proficiency tests. Such tasks are said to possess higher authenticity as they reflect real-life writing conditions better than independent, writing-only tasks. However, to effectively define the reading-into-writing construct, more empirical evidence regarding how writers compose from sources both in real-life and under test conditions is urgently needed. Most previous process studies used think aloud or questionnaire to collect evidence. These methods rely on participants’ perceptions of their processes, as well as their ability to report them. Findings This paper reports on a small-scale experimental study to explore writers’ processes on a reading-into-writing test by employing keystroke logging. Two L2 postgraduates completed an argumentative essay on computer. Their text production processes were captured by a keystroke logging programme. Students were also interviewed to provide additional information. Keystroke logging like most computing tools provides a range of measures. The study examined the students’ reading-into-writing processes by analysing a selection of the keystroke logging measures in conjunction with students’ final texts and interview protocols. Conclusions The results suggest that the nature of the writers’ reading-into-writing processes might have a major influence on the writer’s final performance. Recommendations for future process studies are provided

Experimental Validation of the Dynamic Inertia Measurement Method to Find the Mass Properties of an Iron Bird Test Article

The mass properties of an aerospace vehicle are required by multiple disciplines in the analysis and prediction of flight behavior. Pendulum oscillation methods have been developed and employed for almost a century as a means to measure mass properties. However, these oscillation methods are costly, time consuming, and risky. The NASA Armstrong Flight Research Center has been investigating the Dynamic Inertia Measurement, or DIM method as a possible alternative to oscillation methods. The DIM method uses ground test techniques that are already applied to aerospace vehicles when conducting modal surveys. Ground vibration tests would require minimal additional instrumentation and time to apply the DIM method. The DIM method has been validated on smaller test articles, but has not yet been fully proven on large aerospace vehicles

Testing and Validation of the Dynamic Inertia Measurement Method

The Dynamic Inertia Measurement (DIM) method uses a ground vibration test setup to determine the mass properties of an object using information from frequency response functions. Most conventional mass properties testing involves using spin tables or pendulum-based swing tests, which for large aerospace vehicles becomes increasingly difficult and time-consuming, and therefore expensive, to perform. The DIM method has been validated on small test articles but has not been successfully proven on large aerospace vehicles. In response, the National Aeronautics and Space Administration Armstrong Flight Research Center (Edwards, California) conducted mass properties testing on an "iron bird" test article that is comparable in mass and scale to a fighter-type aircraft. The simple two-I-beam design of the "iron bird" was selected to ensure accurate analytical mass properties. Traditional swing testing was also performed to compare the level of effort, amount of resources, and quality of data with the DIM method. The DIM test showed favorable results for the center of gravity and moments of inertia; however, the products of inertia showed disagreement with analytical predictions

Problems and Paradoxes in Economic and Social Policies of Modern Welfare States

Relationships between economic growth rates and the expansion of welfare expenditures in Western nations are examined. The point is made that real gross national product grew rapidly from about 1959 until about 1973, but that since 1973 it has either grown slowly or not at all, while welfare expenditures and entitlements have continued to escalate. Forecasts of a variety of important economic variables in these countries for the near term are presented and discussed, and it is concluded that despite the current modest economic improvement, difficulties in funding welfare states will continue throughout the remainder of the 1980s. Some consideration is given to problems in welfare states to the end of the century, and further difficulties in funding and managing these states are forecast for this period as well. Problems of welfare states are not regarded as short-term by-products of maladjustments experienced in the Western world in the last 10 years but rather as long-term characteristics.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/67103/2/10.1177_000271628547900102.pd

Verifying Different-modality Properties for Concepts Produces Switching Costs

According to perceptual symbol systems (Barsalou, 1999), sensory-motor simulations underlie the representation of concepts. It follows that sensory-motor phenomena should arise in conceptual processing. Previous studies have shown that switching from one modality to another during perceptual processing incurs a processing cost. If perceptual simulation underlies conceptual processing, then verifying the properties of concepts should exhibit a switching cost as well. For example, verifying a property in the auditory modality (e.g., BLENDER-loud) should be slower after verifying a property in a different modality (e.g., CRANBERRIES-tart) than in the same modality (e.g., LEAVES-rustling). Only words were presented to subjects, and there were no instructions to use imagery. Nevertheless switching modalities incurred a cost, analogous to switching modalities in perception. A second experiment showed that this effect was not due to associative priming between properties in the same modality. These results support the hypothesis that perceptual simulation underlies conceptual processing

Pushouts in software architecture design

A classical approach to program derivation is to progressively extend a simple specification and then incrementally refine it to an implementation. We claim this approach is hard or impractical when reverse engineering legacy software architectures. We present a case study that shows optimizations and pushouts--in addition to refinements and extensions--are essential for practical stepwise development of complex software architectures.NSF CCF 0724979NSF CNS 0509338NSF CCF 0917167NSF DGE-1110007FCT SFRH/BD/47800/2008FCT UTAustin/CA/0056/200