Microstructure and mechanical properties of a high Nb-TiAl alloy fabricated by electron beam melting

Electron beam melting (EBM) has been applied to fabricate a high Nb-TiAl alloy with a fully dense microstructure and good tensile properties at both room and high temperatures. The effects of preheating and melting parameters on melting, solidification, phase transformation and resulting microstructure formation in as-EBM high Nb-TiAl alloy were investigated by performing a design-of-experiments. Results show that the limited EBM processing window can be broadened to produce different characteristic microstructures ranging from nearly fully lamellar γ/α2 to equiaxed γ grains. Such a broadened processing window has been achieved by using stronger preheating beam current. A numerical simulation was performed to understand temperature evolution at a fixed point of interest where electron beam passed several times with a certain line offset within one build layer. Both the preheating and melting stages were considered in the model. Modelling results show that a higher preheating beam current resulted in a longer hold time within the temperature range between 1300 and 1380 °C (i.e. single α-phase region). This helped to produce fine lamellar microstructure in the high Nb-TiAl alloy. Fundamental principles are thus proposed in terms of controlling microstructure formation and fabricating fully dense high Nb-TiAl alloy in as-EBM condition

Influence of Grassland Management on Carbon Allocation in a Semiarid Temperate Steppe

Grazing lands in North China are often excessively grazed and widely degraded, while hay-making lands appear to be in relatively good condition due to grazing exclusion, but they are facing a continuous loss of nutrients in the harvested biomass. In semiarid grasslands, plant productivity and community composition are significantly altered by grazing and haying. Grazing mostly leads to negative effects on aboveground productivity, however root biomass seems to increase with moderate grazing (Gao et al. 2009; Derner et al. 2006), although responses can vary. Aboveground biomass removal can increase C3 grass dominance and productivity (Hofer and Bragg 1981). Grazing exclusion is a valuable mechanism of sequestering soil C (He 2008). However, grazing can change C allocation patterns and affect the amount of C entering the soil. Here we examine the potential effects of common management practices (exclusion with fencing, grazing and hay-making) on semiarid grasslands above- and below-ground C pools. The primary objective of this study was to evaluate the potential of grazing exclusion and annual last-summer haying in previous grazing lands on the storage of C in semiarid grasslands of northern China

Microstructure characterisation and mechanical properties of a functionally-graded NbC/high chromium white cast iron composite

A functionally graded NbC – high chromium white cast iron composite was successfully fabricated by centrifugal casting for high wear applications. The migration of primary NbC particles to the outer periphery, as predicted by Stokes’ law, resulted in an extremely hard outer layer at the surface of a softer bulk material. Microstructural characterisation showed that both the volume fraction and the morphology of the carbides varies along the thickness of the specimen. At the outer surface, the NbC was present as primary carbides while Chinese-script NbC was found in the bulk of the material. Hardness, sliding wear and three-point bending tests confirmed that the outer layer was harder and more wear resistant than the rest of the material, which was correspondingly tougher. The study of the fracture surface of the specimens showed that there is a strong bond between NbC and the matrix such that delamination between the reinforcements and the matrix did not occur during fracture. If Chinese-script NbC can be reduced or prevented in the bulk material, further improvements to toughness could be achieved.ARC LP130100111, ARC DE150101703, FEDER POCI-01-0145-FEDER-00763

A Systematic Review and Meta-Analysis of Short-Term Ambient Ozone Exposure and COPD Hospitalizations

Chronic obstructive pulmonary disease (COPD) is the third leading cause of death globally and ozone exposure is

First results of material charging in the space environment

A satellite experiment, designed to measure potential charging of typical thermal control materials at near geosynchronous altitude, was flown as part of the SCATHA program. Direct observations of charging of typical satellite materials in a natural charging event ( 5 keV) are presented. The results show some features which differ significantly from previous laboratory simulations of the environment