488 research outputs found
Effective oscillator strength distributions of spherically symmetric atoms for calculating polarizabilities and long-range atom-atom interactions
Effective oscillator strength distributions are systematically generated and
tabulated for the alkali atoms, the alkaline-earth atoms, the alkaline-earth
ions, the rare gases and some miscellaneous atoms. These effective
distributions are used to compute the dipole, quadrupole and octupole static
polarizabilities, and are then applied to the calculation of the dynamic
polarizabilities at imaginary frequencies. These polarizabilities can be used
to determine the long-range , and atom-atom interactions
for the dimers formed from any of these atoms and ions, and we present tables
covering all of these combinations
Relativistic calculations of quasi-one-electron atoms and ions using Laguerre and Slater spinors
A relativistic description of the structure of heavy alkali atoms and
alkali-like ions using S-spinors and L-spinors has been developed. The core
wavefunction is defined by a Dirac-Fock calculation using an S-spinors basis.
The S-spinor basis is then supplemented by a large set of L-spinors for the
calculation of the valence wavefunction in a frozen-core model. The numerical
stability of the L-spinor approach is demonstrated by computing the energies
and decay rates of several low-lying hydrogen eigenstates, along with the
polarizabilities of a hydrogenic ion. The approach is then applied to
calculate the dynamic polarizabilities of the , and states of
Sr. The magic wavelengths at which the Stark shifts between different pairs
of transitions are zero are computed. Determination of the magic wavelengths
for the and transitions near
~nm (near the wavelength for the transitions) would allow a
determination of the oscillator strength ratio for the
and transitions.Comment: 2 figures, 23 page
Recommended from our members
Meta-analysis of preclinical studies of mesenchymal stromal cells to treat rheumatoid arthritis.
BackgroundThis study aims to evaluate the quality of preclinical data, determine the effect sizes, and identify experimental measures that inform efficacy using mesenchymal stromal (or stem) cells (MSC) therapy in animal models of rheumatoid arthritis (RA).MethodsLiterature searches were performed on MSC preclinical studies to treat RA. MSC treatment effect sizes were determined by the most commonly used outcome measures, including paw thickness, clinical score, and histological score.FindingsA total of 48 studies and 94 treatment arms were included, among which 42 studies and 79 treatment arms reported that MSC improved outcomes. The effect sizes of RA treatments using MSC, when compared to the controls, were: paw thickness was ameliorated by 53.6% (95% confidence interval (CI): 26.7% -80.4%), histological score was decreased by 44.9% (95% CI: 33.3% -56.6%), and clinical score was decreased by 29.9% (95% CI: 16.7% -43.0%). Specifically, our results indicated that human umbilical cord derived MSC led to large improvements of the clinical score (-42.1%) and histological score (-51.4%).InterpretationTo the best of our knowledge, this meta-analysis is to quantitatively answer whether MSC represent a robust RA treatment in animal models. It suggests that in preclinical studies, MSC have consistently exhibited therapeutic benefits. The findings demonstrate a need for considering variations in different animal models and treatment protocols in future studies using MSC to treat RA in humans to maximise the therapeutic gains in the era of precision medicine.FundsNIH [1DP2CA195763], Baylx Inc.: BI-206512, NINDS/NIH Training Grant [Award# NS082174]
Ab initio study of the formation of transparent carbon under pressure
A body-centered tetragonal carbon (bct-Carbon) allotrope has been predicted
to be a transparent carbon polymorph obtained under pressure. The structural
transition pathways from graphite to diamond, M-Carbon, and bct-Carbon are
simulated and the lowest activation barrier is found for the graphite-bct
transition. Furthermore, bct-Carbon has higher shear strength than diamond due
to its perpendicular graphene-like structure. Our results provide a possible
explanation for the formation of a transparent carbon allotrope via the cold
compression of graphite. We also verify that this allotrope is hard enough to
crack diamond.Comment: [email protected] or [email protected]
A terahertz grid frequency doubler
We present a 144-element terahertz quasi-optical grid frequency doubler. The grid is a planar structure with bow-tie antennas as a unit cell, each loaded with a planar Schottky diode. The maximum output power measured for this grid is 24 mW at 1 THz for 3.1-μs 500-GHz input pulses with a peak input power of 47 W. An efficiency of 0.17% for an input power of 6.3 W and output power of 10.8 mW is measured. To date, this is the largest recorded output power for a multiplier at terahertz frequencies. Input and output tuning curves are presented and an output pattern is measured and compared to theory
Depth resolution of Piezoresponse force microscopy
Given that a ferroelectric domain is generally a three dimensional entity, the determination of its area as well as its depth is mandatory for full characterization. Piezoresponse force microscopy (PFM) is known for its ability to map the lateral dimensions of ferroelectric domains with high accuracy. However, no depth profile information has been readily available so far. Here, we have used ferroelectric domains of known depth profile to determine the dependence of the PFM response on the depth of the domain, and thus effectively the depth resolution of PFM detection
Development of Drive Control Strategy for Front-and-Rear-Motor-Drive Electric Vehicle (FRMDEV)
In order to achieve both high-efficiency drive and low-jerk mode switch in FRMDEVs, a drive control strategy is proposed, consisting of top-layer torque distribution aimed at optimal efficiency and low-layer coordination control improving mode-switch jerk. First, with the use of the off-line particle swarm optimization algorithm (PSOA), the optimal switching boundary between single-motor-drive mode (SMDM) and dual-motor drive mode (DMDM) was modelled and a real-time torque distribution model based on the radial basis function (RBF) was created to achieve the optimal torque distribution. Then, referring to the dynamic characteristics of mode switch tested on a dual-motor test bench, a torque coordination strategy by controlling the variation rate of the torque distribution coefficient during the mode-switch process was developed. Finally, based on a hardware-in-loop (HIL) test platform and an FRMDEV, the proposed drive control strategy was verified. The test results show that both drive economy and comfort were improved significantly by the use of the developed drive control strategy
Morphology Transformation of Foldamer Assemblies Triggered by Single Oxygen Atom on Critical Residue Switch
The synthesis of morphologically well-defined peptidic materials via self-assembly is challenging but demanding for biocompatible functional materials. Moreover, switching morphology from a given shape to other predictable forms by molecular modification of the identical building block is an even more complicated subject because the self-assembly of flexible peptides is prone to diverge upon subtle structural change. To accomplish controllable morphology transformation, systematic self-assembly studies are performed using congener short β-peptide foldamers to find a minimal structural change that alters the self-assembled morphology. Introduction of oxygen-containing β-amino acid (ATFC) for subtle electronic perturbation on hydrophobic foldamer induces a previously inaccessible solid-state conformational split to generate the most susceptible modification site for morphology transformation of the foldamer assemblies. The site-dependent morphological switching power of ATFC is further demonstrated by dual substitution experiments and proven by crystallographic analyses. Stepwise morphology transformation is shown by modifying an identical foldamer scaffold. This study will guide in designing peptidic molecules from scratch to create complex and biofunctional assemblies with nonspherical shapes
Universal phase transitions of B1 structured stoichiometric transition-metal carbides
The high-pressure phase transitions of B1-structured stoichiometric
transition metal carbides (TMCs, TM=Ti, Zr, Hf, V, Nb, and Ta) were
systematically investigated using ab initio calculations. These carbides
underwent universal phase transitions along two novel phase-transition routes,
namely, B1\rightarrowdistorted TlI (TlI')\rightarrowTlI and/or
B1\rightarrowdistorted TiB (TiB')\rightarrowTiB, when subjected to pressures.
The two routes can coexist possibly because of the tiny enthalpy differences
between the new phases under corresponding pressures. Four new phases result
from atomic slips of the B1-structured parent phases under pressure. After
completely releasing the pressure, taking TiC as a representative of TMCs, only
its new TlI'-type phase is mechanically and dynamically stable, and may be
recovered.Comment: [email protected]
- …