Nanomaterial-Enhanced Receptor Technology for Silicon On-Chip Biosensing Application

Nanomaterials integration in biosensors designs are known to enhance sensing and signaling capabilities by exhibiting remarkably high surface area enhancement and intrinsic reactivity owing to their distinctive optical, chemical, electrical and catalytic properties. We present the synthesis and characterization of silver nanoparticles (AgNPs), and their immobilization on a silicon on-chip biosensor platform to enhance sensing capability for prostate specific antigen (PSA) - cancer biomarkers. Several techniques, including UV-Visible (UV-Vis) absorption spectrum, Fourier transforms infrared spectroscopy (FTIR), high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM) and field emission scanning electron microscopy (FESEM) were used for characterizing the AgNPs. The biochemical sensor consists of AgNPs immobilized on the receptor layer of a silicon avalanche mode light emitting device (Si AM LED) which enables on-chip optical detection biological analytes. A bio-interaction layer etched from the chip interacts with the evanescent field of a micro dimensioned waveguide. An array of detectors below the receptor cavity selectively monitor reflected light in the UV, visible, infrared and far infrared wavelength regions. AgNPs used as an immobilization layer in the receptor layer enhances selective absorption analytes, causing a change in detection signal as a function of propagation wavelength as light is dispersed. The analytes could range from gases to cancer biomarkers like prostate specific antigen

Leverage and firm performance: New evidence on the role of firm size

In this paper, we draw on the Hansen (1999) threshold regression model to examine the empirical links between leverage and firm performance by means of a new threshold variable, firm size. We ask whether there exists an optimal firm size for which leverage is not negatively related to firm performance. Accordingly, with a panel data of 101 listed firms in Nigeria between 2003 and 2007, we explore whether the ultimate effect of leverage on firm performance is contingent on firm size; that is, whether the type of impact that leverage has on the performance of a firm is dependent on the size of the firm. Our results show that the negative effect of leverage on firm performance is most eminent and significant for small-sized firms and that the evidence of a negative effect diminishes as a firm grows, eventually vanishing when firm size exceeds its estimated threshold level. We find that this result continues to hold, irrespective of the debt ratios utilized. In line with earlier studies, our results show that the effect of leverage on Tobin’s Q is positive for Nigeria’s listed firms. However, our new finding is the evidence that the strength of the positive relationship depends on the size of the firm and is mostly higher for small-sized firms

The effects of material formulation and manufacturing process on mechanical and thermal properties of epoxy/clay nanocomposites

A holistic study was conducted to investigate the combined effect of three different pre-mixing processes, namely mechanical mixing, ultrasonication and centrifugation, on mechanical and thermal properties of epoxy/clay nanocomposites reinforced with different platelet-like montmorillonite (MMT) clays (Cloisite Na+, Cloisite 10A, Cloisite 15 or Cloisite 93A) at clay contents of 3–10 wt%. Furthermore, the effect of combined pre-mixing processes and material formulation on clay dispersion and corresponding material properties of resulting composites was investigated using X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), flexural and Charpy impact tests, Rockwell hardness tests and differential scanning calorimetry (DSC). A high level of clay agglomeration and partially intercalated/exfoliated clay structures were observed regardless of clay type and content. Epoxy/clay nanocomposites demonstrate an overall noticeable improvement of up to 10 % in the glass transition temperature (Tg) compared to that of neat epoxy, which is interpreted by the inclusion of MMT clays acting as rigid fillers to restrict the chain mobility of epoxy matrices. The impact strength of epoxy/clay nanocomposites was also found to increase by up to 24 % with the addition of 3 wt% Cloisite Na+ clays. However, their flexural strength and hardness diminished when compared to those of neat epoxy, arising from several effects including clay agglomeration, widely distributed microvoids and microcracks as well as weak interfacial bonding between clay particles and epoxy matrices, as confirmed from TEM and SEM results. Overall, it is suggested that an improved technique should be used for the combination of pre-mixing processes in order to achieve the optimal manufacturing condition of uniform clay dispersion and minimal void contents

Twelve-month observational study of children with cancer in 41 countries during the COVID-19 pandemic

Introduction Childhood cancer is a leading cause of death. It is unclear whether the COVID-19 pandemic has impacted childhood cancer mortality. In this study, we aimed to establish all-cause mortality rates for childhood cancers during the COVID-19 pandemic and determine the factors associated with mortality. Methods Prospective cohort study in 109 institutions in 41 countries. Inclusion criteria: children <18 years who were newly diagnosed with or undergoing active treatment for acute lymphoblastic leukaemia, non-Hodgkin's lymphoma, Hodgkin lymphoma, retinoblastoma, Wilms tumour, glioma, osteosarcoma, Ewing sarcoma, rhabdomyosarcoma, medulloblastoma and neuroblastoma. Of 2327 cases, 2118 patients were included in the study. The primary outcome measure was all-cause mortality at 30 days, 90 days and 12 months. Results All-cause mortality was 3.4% (n=71/2084) at 30-day follow-up, 5.7% (n=113/1969) at 90-day follow-up and 13.0% (n=206/1581) at 12-month follow-up. The median time from diagnosis to multidisciplinary team (MDT) plan was longest in low-income countries (7 days, IQR 3-11). Multivariable analysis revealed several factors associated with 12-month mortality, including low-income (OR 6.99 (95% CI 2.49 to 19.68); p<0.001), lower middle income (OR 3.32 (95% CI 1.96 to 5.61); p<0.001) and upper middle income (OR 3.49 (95% CI 2.02 to 6.03); p<0.001) country status and chemotherapy (OR 0.55 (95% CI 0.36 to 0.86); p=0.008) and immunotherapy (OR 0.27 (95% CI 0.08 to 0.91); p=0.035) within 30 days from MDT plan. Multivariable analysis revealed laboratory-confirmed SARS-CoV-2 infection (OR 5.33 (95% CI 1.19 to 23.84); p=0.029) was associated with 30-day mortality. Conclusions Children with cancer are more likely to die within 30 days if infected with SARS-CoV-2. However, timely treatment reduced odds of death. This report provides crucial information to balance the benefits of providing anticancer therapy against the risks of SARS-CoV-2 infection in children with cancer

Omics-based molecular techniques in oral pathology centred cancer: Prospect and challenges in Africa

: The completion of the human genome project and the accomplished milestones in the human proteome project; as well as the progress made so far in computational bioinformatics and “big data” processing have contributed immensely to individualized/personalized medicine in the developed world.At the dawn of precision medicine, various omics-based therapies and bioengineering can now be applied accurately for the diagnosis, prognosis, treatment, and risk stratifcation of cancer in a manner that was hitherto not thought possible. The widespread introduction of genomics and other omics-based approaches into the postgraduate training curriculum of diverse medical and dental specialties, including pathology has improved the profciency of practitioners in the use of novel molecular signatures in patient management. In addition, intricate details about disease disparity among diferent human populations are beginning to emerge. This would facilitate the use of tailor-made novel theranostic methods based on emerging molecular evidences

Notes for genera: basal clades of Fungi (including Aphelidiomycota, Basidiobolomycota, Blastocladiomycota, Calcarisporiellomycota, Caulochytriomycota, Chytridiomycota, Entomophthoromycota, Glomeromycota, Kickxellomycota, Monoblepharomycota, Mortierellomycota, Mucoromycota, Neocallimastigomycota, Olpidiomycota, Rozellomycota and Zoopagomycota)

Compared to the higher fungi (Dikarya), taxonomic and evolutionary studies on the basal clades of fungi are fewer in number. Thus, the generic boundaries and higher ranks in the basal clades of fungi are poorly known. Recent DNA based taxonomic studies have provided reliable and accurate information. It is therefore necessary to compile all available information since basal clades genera lack updated checklists or outlines. Recently, Tedersoo et al. (MycoKeys 13:1--20, 2016) accepted Aphelidiomycota and Rozellomycota in Fungal clade. Thus, we regard both these phyla as members in Kingdom Fungi. We accept 16 phyla in basal clades viz. Aphelidiomycota, Basidiobolomycota, Blastocladiomycota, Calcarisporiellomycota, Caulochytriomycota, Chytridiomycota, Entomophthoromycota, Glomeromycota, Kickxellomycota, Monoblepharomycota, Mortierellomycota, Mucoromycota, Neocallimastigomycota, Olpidiomycota, Rozellomycota and Zoopagomycota. Thus, 611 genera in 153 families, 43 orders and 18 classes are provided with details of classification, synonyms, life modes, distribution, recent literature and genomic data. Moreover, Catenariaceae Couch is proposed to be conserved, Cladochytriales Mozl.-Standr. is emended and the family Nephridiophagaceae is introduced