Sliding Seal Materials for Adiabatic Engines, Phase 2

An essential task in the development of the heavy-duty adiabatic diesel engine is identification and improvements of reliable, low-friction piston seal materials. In the present study, the sliding friction coefficients and wear rates of promising carbide, oxide, and nitride materials were measured under temperature, environmental, velocity, and loading conditions that are representative of the adiabatic engine environment. In addition, silicon nitride and partially stabilized zirconia disks were ion implanted with TiNi, Ni, Co, and Cr, and subsequently run against carbide pins, with the objective of producing reduced friction via solid lubrication at elevated temperature. In order to provide guidance needed to improve materials for this application, the program stressed fundamental understanding of the mechanisms involved in friction and wear. Electron microscopy was used to elucidate the micromechanisms of wear following wear testing, and Auger electron spectroscopy was used to evaluate interface/environment interactions which seemed to be important in the friction and wear process. Unmodified ceramic sliding couples were characterized at all temperatures by friction coefficients of 0.24 and above. The coefficient at 800 C in an oxidizing environment was reduced to below 0.1, for certain material combinations, by the ion implanation of TiNi or Co. This beneficial effect was found to derive from lubricious Ti, Ni, and Co oxides

Influence of nonmartensitic transformation products on mechanical properties of tempered martensite

The influence of nonmartensitic transformations products on the mechanical properties of tempered martensite is presented for samples of a SAE 4340 steel, partially isothermally transformed to specific high-temperature transformation products and quenched and tempered to hardness values of from 25 to 40 Rockwell c. The effects of upper bainite in amounts of 1,5, 10, 20 and 50 percent, of 5 percent ferrite, and of 5 percent pearlite on the tensile, impact, and fatigue properties are evaluated. (author

Utilization of Virtual Server Technology in Mission Operations

Virtualization provides the opportunity to continue to do "more with less"---more computing power with fewer physical boxes, thus reducing the overall hardware footprint, power and cooling requirements, software licenses, and their associated costs. This paper explores the tremendous advantages and any disadvantages of virtualization in all of the environments associated with software and systems development to operations flow. It includes the use and benefits of the Intelligent Platform Management Interface (IPMI) specification, and identifies lessons learned concerning hardware and network configurations. Using the Huntsville Operations Support Center (HOSC) at NASA Marshall Space Flight Center as an example, we demonstrate that deploying virtualized servers as a means of managing computing resources is applicable and beneficial to many areas of application, up to and including flight operations

Maintaining a way of life: trials and tribulations of farmers’ market families

Never before in our nation’s history has there been so many ways for consumers to purchase food. From grocery stores, to super centers such as Wal-Mart and Costco, convenience stores, online purchases, community supported agriculture (CSA), and farmers’ markets, Americans have a multitude of venues to choose from. Although many Americans currently purchase their foods from grocery stores, a growing number of them are buying locally at their farmers’ markets and from CSAs. As the sustainability movement takes a greater foothold in the American household, local products and local foods are becoming ever more important and prevalent. Yet with all of the statistics surrounding local agriculture, the human element is often lost. A majority of small farmers and their spouses, often the ones who sell at a local level, have to work full time both on and off farm to support their families and farms. This case study examines the professional lives of five local farm families who choose to sell their products at the Fayetteville, Arkansas farmers’ market. It seeks to understand farmers’ reasons for farming and selling locally, as well as their biggest challenges and rewards. In addition, it seeks to fill gaps in literature regarding farmers’ motivations for selling at a local level

Studies of superconducting materials with muon spin rotation

The muon spin rotation/relaxation technique was found to be an exceptionally effective means of measuring the magnetic properties of superconductors, including the new high temperature superconductor materials, at the microscopic level. The technique directly measures the magnetic penetration depth (type II superconductors (SC's)) and detects the presence of magnetic ordering (antiferromagnetism or spin-glass ordering were observed in some high temperature superconductor (HTSC's) and in many closely related compounds). Extensive studies of HTSC materials were conducted by the Virginia State University - College of William and Mary - Columbia University collaboration at Brookhaven National Laboratory and TRIUMF (Vancouver). A survey of LaSrCuO and YBaCaCuO systems shows an essentially linear relationship between the transition temperature T(sub c) and the relaxation rate. This appears to be a manifestation of the proportionality between T(sub c) and the Fermi energy, which suggests a high energy scale for the SC coupling, and which is not consistent with the weak coupling of phonon-mediated SC. Studies of LaCuO and YBaCuO parent compounds show clear evidence of antiferromagnetism. YBa2Cu(3-x)CO(x)O7 shows the simultaneous presence of spin-glass magnetic ordering and superconductivity. Three-dimensional SC, (Ba, K) BiO3, unlike the layered CuO-based compounds, shows no suggestion of magnetic ordering. Experimental techniques and theoretical implications are discussed

The Energy Expenditure of Recreational Ballroom Dance

International Journal of Exercise Science 7(3) : 228-235, 2014. The popularity of recreational ballroom dancing has increased dramatically in recent years. Yet, relatively little information is known regarding the physiological demands of ballroom dancing. The purpose of this study was to determine the energy requirements for recreational ballroom dancing. 24 participants volunteered including 12 women (mean ± SD: 21 ± 3 yrs, 165.8 ± 7.4 cm, 56.8 ± 11.1 kg) and 12 men (23 ± 1 yr, 175.5 ± 8.4 cm, 78.1 ± 15.6 kg). Gas exchange was recorded using a portable metabolic system during a series of five ballroom dances: Waltz, Foxtrot, Swing, Cha-Cha, and Swing. Each song was four minutes in duration, separated by a two minute rest period, totaling 30 minutes of testing. The intensity of each dance in metabolic equivalents (METs) is: Waltz = 5.3 ± 1.3, Foxtrot = 5.3 ± 1.5, Cha-Cha = 6.4 ± 1.6 and Swing = 7.1 ± 1.6 and 6.9 ± 1.7. Mean energy cost for the 30 minutes of testing was 5.88 ±1.7 kilocalories (kcal•min-1), 6.12 ± 1.2 METs. Mean energy cost and months of recreational dance experience were not significantly related (R2 = 0.04, p = 0.35). Energy expenditure of the follow partner was significantly related to the energy expenditure of the lead partner (R2 = 0.52, p \u3c0.01). Finally, this study validates the intensity of recreational ballroom dance as matching the criteria established by the American College of Sports Medicine for improving cardiorespiratory fitness and reducing the risk of chronic diseases

Intravenously delivered mesenchymal stem cell-derived exosomes target M2-type macrophages in the injured spinal cord

In a previous report we showed that intravenous infusion of bone marrow-derived mesenchymal stem cells (MSCs) improved functional recovery after contusive spinal cord injury (SCI) in the non-immunosuppressed rat, although the MSCs themselves were not detected at the spinal cord injury (SCI) site [1]. Rather, the MSCs lodged transiently in the lungs for about two days post-infusion. Preliminary studies and a recent report [2] suggest that the effects of intravenous (IV) infusion of MSCs could be mimicked by IV infusion of exosomes isolated from conditioned media of MSC cultures (MSCexos). In this study, we assessed the possible mechanism of MSCexos action on SCI by investigating the tissue distribution and cellular targeting of DiR fluorescent labeled MSCexos at 3 hours and 24 hours after IV infusion in rats with SCI. The IV delivered MSCexos were detected in contused regions of the spinal cord, but not in the noninjured region of the spinal cord, and were also detected in the spleen, which was notably reduced in weight in the SCI rat, compared to control animals. DiR "hotspots" were specifically associated with CD206-expressing M2 macrophages in the spinal cord and this was confirmed by co-localization with anti-CD63 antibodies labeling a tetraspanin characteristically expressed on exosomes. Our findings that MSCexos specifically target M2-type macrophages at the site of SCI, support the idea that extracellular vesicles, released by MSCs, may mediate at least some of the therapeutic effects of IV MSC administration

Domain Switching as a Toughening Mechanism in Tetragonal Zirconia

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/65640/1/j.1151-2916.1988.tb05943.x.pd

Loops under Strategies ... Continued

While there are many approaches for automatically proving termination of term rewrite systems, up to now there exist only few techniques to disprove their termination automatically. Almost all of these techniques try to find loops, where the existence of a loop implies non-termination of the rewrite system. However, most programming languages use specific evaluation strategies, whereas loop detection techniques usually do not take strategies into account. So even if a rewrite system has a loop, it may still be terminating under certain strategies. Therefore, our goal is to develop decision procedures which can determine whether a given loop is also a loop under the respective evaluation strategy. In earlier work, such procedures were presented for the strategies of innermost, outermost, and context-sensitive evaluation. In the current paper, we build upon this work and develop such decision procedures for important strategies like leftmost-innermost, leftmost-outermost, (max-)parallel-innermost, (max-)parallel-outermost, and forbidden patterns (which generalize innermost, outermost, and context-sensitive strategies). In this way, we obtain the first approach to disprove termination under these strategies automatically.Comment: In Proceedings IWS 2010, arXiv:1012.533

Wind-US Code Physical Modeling Improvements to Complement Hypersonic Testing and Evaluation

This report gives an overview of physical modeling enhancements to the Wind-US flow solver which were made to improve the capabilities for simulation of hypersonic flows and the reliability of computations to complement hypersonic testing. The improvements include advanced turbulence models, a bypass transition model, a conjugate (or closely coupled to vehicle structure) conduction-convection heat transfer capability, and an upgraded high-speed combustion solver. A Mach 5 shock-wave boundary layer interaction problem is used to investigate the benefits of k- s and k-w based explicit algebraic stress turbulence models relative to linear two-equation models. The bypass transition model is validated using data from experiments for incompressible boundary layers and a Mach 7.9 cone flow. The conjugate heat transfer method is validated for a test case involving reacting H2-O2 rocket exhaust over cooled calorimeter panels. A dual-mode scramjet configuration is investigated using both a simplified 1-step kinetics mechanism and an 8-step mechanism. Additionally, variations in the turbulent Prandtl and Schmidt numbers are considered for this scramjet configuration