179 research outputs found
Dynamic reduction strategies to extend modal analysis approach at higher frequencies
Modal analysis on huge finite element models requires a numerical simplification in terms of total number of degrees of freedom (d.o.f.'s). The above aim is generally achieved by choosing some master d.o.f.'s and condensing the structure matrices on those d.o.f.'s. Static condensation (i.e. stiffness matrix reduction) is theoretically an errorless operation; on the other hand, mass condensation can only be approximate in dynamic applications. In order to accomplish matrix condensation, the technique mainly used is the so-called Guyan reduction. The present paper outlines the limitations of the technique, introducing some significant improvements. These are related to the inertia conservation properties of the reduced mass matrix and the condensed mass matrix assembly by means of fictitious and appropriate stiffness connections that are different from those obtained by the stiffness model. The effectiveness of the modified approach is demonstrated with respect to the modal analysis results obtained by Guyan approach, through three different test cases. (c) 2007 Elsevier B.V. All rights reserved
structural analysis of transversally loaded quasi isotropic rectilinear orthotropic composite circular plates with galerkin method
Abstract Bending analysis of rectilinear orthotropic composite plates have been scarcely investigated taking into account the increasing use of composite materials in structural applications in the last years. This kind of plates are laminates with axisymmetric geometry and they are made up of unidirectionally reinforced layers with different orientations. Transversally loading this kind of circular plates, the deflected mid-surface is not independent from the circumferential coordinate, unlike the case of isotropic circular plate. Nevertheless, the quasi-isotropic stacking sequence makes still possible to introduce the hypothesis of axisymmetry for the mid-surface deflection under transversal load, disregarding the circumferential variation of the vertical displacement connected to the variable bending stiffness. Then, the constitutive equations for this specific family of plates were obtained finding the stress resultants-strains relations in the global cylindrical coordinate system. These expressions, along with the equilibrium equations, made it possible to derive the governing equation of the problem in the frame of Kirchhoff-Love hypothesis of the classical lamination theory. The Galerkin method was applied to solve the governing third order differential equation in terms of mid-surface deflection, introducing appropriate polynomial approximation functions compliant with the boundary conditions. In particular, fully clamped constraint conditions were considered for the outer diameter of the plate in conjunction with an internal rigid core. The characterization of this model allows to define the stiffness matrix terms of a custom composite bolted joint finite element, that is the object of future developments of this work. Results of the original proposed method are presented and compared to those obtained by means of FEA performed with a refined reference model, demonstrating a good agreement
Recommended from our members
Solvent usage, recycling potential, and treatability studies in a research and development setting
Use of solvents in a R&D setting is a difficult waste stream to apply typical waste minimization techniques to. There is typically a large variety of solvents used in small quantities by a large number of people. Argonne conducted a study of R&D uses of solvents to identify quantities, contaminants, and recycling criteria. The second phase of the project identified a typical solvent user and demonstrated technology that could be applied to the waste stream
Comparison between finite element and experimental evidences of innovative W lattice materials for sacrificial limiter applications
Power exhaust is a key mission for the realization of fusion electricity. Engineering challenges may arise from the extreme heat fluxes developed during plasma transients, above the limit offered by existing materials. These can reduce the lifetime of plasma-facing components (PFCs), imposing extraordinary maintenance, reactor safety issues and ultimately delayed return to normal operation. Concerning the EU DEMO reactor, discrete sacrificial limiters are being investigated as the last safety resource of the reactor's wall in case of unmitigated events. Within this context, micro-engineered tungsten (W) lattices are proposed to cope with unmitigated plasma disruptions. Unlike bulk W, lattices can be tailored to meet the operational requirements of the limiter, compromise between steady-state and off-design performances while avoiding overloading of the heat sink and delay the need for extraordinary maintenance. By calibrating an equivalent solid model originally developed and validated for open-cell aluminum (Al) foams, tailored lattices have been modelled and samples fabricated through additive manufacturing for characterization and testing, currently ongoing. In the present work, the thermal response of lattice samples during thermal shock high heat flux (HHF) tests performed at the linear facility QSPA Kh-50 facility is simulated using ANSYS and compared with available results. Enthalpy changes of W were imposed to simulate phase change. Good agreement with experiments and SDC-IC reference up to melting point was observed. Ultimately, a thermal quench of an unmitigated DEMO disruption was simulated involving an original MAPDL routine that removes mesh elements at the melting or vaporization point.s
Healthcare workers’ behaviors and personal determinants associated with providing adequate sexual and reproductive healthcare services in sub-Saharan Africa: a systematic review
A new theoretical approach for structural modelling of riveted and spot welded multi-spot structures
A general theoretical approach based on theory of elasticity is presented in order to define the structural behaviour of riveted and spot welded joints. The new closed form solutions lead to the definition of a joint element useful to FE models of riveted or spot welded multi-spot structures. The objective is an accurate evaluation of the local elastic stiffness of spot joints in FE analysis, which is fundamental to perform a reliable simulation of multi-joint structures and, consequently, a good estimate of loads acting on spots; this makes it possible to introduce structural stress or new general criteria allowing, for example, to predict fatigue behaviour. On the other hand, a low entry of degrees of freedom is needed when several spot joints are present in a complex structure. The goal is to reach a reliable spot region model which can be used as the basis to develop a spot element in FE analysis. In the present paper, based on new closed form solutions, a spot element is introduced, so as to precisely evaluate both local and overall stiffness both of spot welded joints and riveted joints. Based on the stress function approach and the Kirchhoff plate theory in linear elastic hypotheses, closed-form in-plane stress, displacement, moment and transverse shear force solutions are derived for a new bidimensional model, subjected to various types of loads. The capability to simulate spot welds or rivets depends on the definition of two elastic parameters intrinsic in closed form solutions, that tunes the theoretical model according to actual joint behaviour. The proposed joint element combines the precision in the simulation with a very limited number degrees of freedom in the overall finite element model of an actual multi-spot structure. The results obtained using the introduced theoretical framework and spot element approach perfectly match those obtained using very refined FE models and experimental data. © 2009 Elsevier Ltd. All rights reserved
Sviluppo di un Elemento Punto di Saldatura per L’analisi ad Elementi Finiti di Strutture Saldate a Punti
Recommended from our members
Graduate student research opportunities at United States Department of Energy national laboratories.
Modelling spot welded joints in elastic-plastic field
In this paper two analytical approaches for the evaluation of spot weld joints behavior in elastic plastic conditions are presented and compared. The procedures are based on two new theoretical models of spot weld region: a circular plate, with a central rigid nugget, having two variable thickness profiles. The complex closed-form solutions allow to describe the displacement of a rigid nugget while plasticity and moderately large deflections are present. These approaches allow to reach a reliable spot weld region model which can be used as the basis to develop a spot weld element in FE analysis even when plasticity and large deflections are in effect. The correct evaluation of the spot stiffness is the basis of a reliable evaluation of fatigue resistance or failure mode of the joint and, consequently, allows to correctly simulate the behavior of an actual multi-spot structure
- …