Polysaccharide-Based Materials Created by Physical Processes: From Preparation to Biomedical Applications

Polysaccharide-based materials created by physical processes have received considerable attention for biomedical applications. These structures are often made by associating charged polyelectrolytes in aqueous solutions, avoiding toxic chemistries (crosslinking agents). We review the principal polysaccharides (glycosaminoglycans, marine polysaccharides, and derivatives) containing ionizable groups in their structures and cellulose (neutral polysaccharide). Physical materials with high stability in aqueous media can be developed depending on the selected strategy. We review strategies, including coacervation, ionotropic gelation, electrospinning, layer-by-layer coating, gelation of polymer blends, solvent evaporation, and freezing–thawing methods, that create polysaccharide-based assemblies via in situ (one-step) methods for biomedical applications. We focus on materials used for growth factor (GFs) delivery, scaffolds, antimicrobial coatings, and wound dressings

SELF-AGGREGATION OF 5,10,15,20-TETRAKIS(4-METHOXYPHENYL)PORPHYRIN (TMPP): SPECTROSCOPIC STUDIES AND MULTIVARIATE ANALYZES

In this work, the spectroscopic properties of 5,10,15,20-tetrakis(4-methoxyphenyl)porphyrin (TMPP) in solvents of different polarities and water/ethanol mixtures were studied by electronic absorption spectroscopy and resonance light scattering associated with statistical analysis. The molar absorption coefficient and emission maximum of TMPP were dependent on solvent polarity. In the water/ethanol mixture, TMPP remained monomeric up to 25% of water, when it reaches its critical aggregation percentage. Oblique head-to-tail aggregate was found at intermediate water content (35 - 55%), while formation of a J-type aggregate was observed at higher water content (> 60%)

Hypericin photodynamic activity in DPPC liposome. part I : biomimetism of loading, location, interactions and thermodynamic properties

Hypericin (Hyp) is a potential photosensitizer drug for Photodynamic Therapy (PDT). However, the high lipophilicity of Hyp prevents its preparation in water. To overcome the Hyp solubility problem, this study uses the liposomal vesicle of DPPC. Otherwise liposome is also one of the most employed artificial systems that mimetizes cell membranes. Our present focus is the interaction of Hyp into DPPC liposome as biomimetic system. We studied the loading, interaction, and localization of Hyp (2.8 μmol L−1) in DPPC (5.4 mmol L−1) liposomes, as well as the thermodynamic aspects of Hyp-liposomes. The Hyp addition to the DPPC liposome dispersion showed a Encapsulation Efficiency for [Hyp] = 2.8 μmol L−1 in [DPPC] = 5.3 mmol L−1 of 74.3% and 89.3% at 30.0 and 50.0 °C, respectively. The encapsulation profile obeys a pseudo first-order kinetic law, with a rate constant of 1.26 × 10−3 s−1 at 30.0 °C. Also the data suggests this reaction is preceded by an extremely rapid step. A study on the binding of Hyp/DPPC liposomes (Kb), performed at several temperatures, showed results of 4.8 and 18.5 × 103 L mol−1 at 293 and 323 K, respectively. Additionally, a decrease was observed in the ΔG of the Hyp/DPPC interaction (−20.6 and − 26.4 kL mol−1 at 293 and 323 K, respectively). The resulting ΔH > 0 with ΔS < 0 shows that the entropy is driven the process. Studies of Hyp location in the liposome at 298 K revealed the existence of two different Hyp populations with a Stern-Volmer constant (Ksv) of 4.65 and 1.87 L mol−1 using iodide as an aquo-suppressor at concentration ranged from 0 to 0.025 mol L−1 and from 0.025 to 0.150 mol L−1, respectively. Furthermore, studies of Fluorescence Resonance Energy Transfer, using DPH as a donor and Hyp as an acceptor, revealed that Hyp is allocated in different binding sites of the liposome. This is dependent on temperature. Thermal studies revealed that the Hyp/DPPC formulation presented reasonable stability. Size and morphological investigations showed that Hyp incorporation increases the average size of DPPC liposomes from 116 to 154 nm. The study demonstrated the ability of the Hyp-DPPC liposome as an interesting system for drug delivery system that can be applied to PDT190118127CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO - CNPQCOORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPESNão temNão temWe are thankful for the financial support from the Brazilian Federal Agencies for Support and Evaluation of Graduate Education: CAPES, CNPq, UGF-SETI/PR, Fundação Araucária-SETI/PR and also to the Department of Chemistry of Unicamp-Campinas/SP, especially to prof. Dr. Watson Loh for ITC measurement

SPECTROSCOPIC STUDY OF ALUMINUM PHTHALOCYANINE CHLORIDE (AlPcCl) IN HOMOGENEOUS AND MICRO-HETEROGENEOUS MEDIA CONSISTING OF P-123 AND F-127 POLYMERIC MICELLES

Aluminum phthalocyanine chloride (AlPcCl) is a photoactive compound which has been used as a photosensitizer (PS) in photodynamic therapy (PDT). Its spectroscopic properties have been studied in solvents of different polarities (ethanol, acetone, dimethylsulfoxide and chloroform). Its solubility has been found to decrease with increasing solvent polarity, together with full self-aggregation in aqueous solution. The binding of AlPcCl to the copolymer PluronicTM micellar class P-123 and F-127 used as solubilizer/carriers was studied. Greater interaction between the more hydrophobic copolymer P-123 and AlPcCl was observed, besides a complex interaction profile involving different AlPcCl forms (self-aggregate/monomeric form) in the copolymers. Time- and temperature-dependent structural organization of AlPcCl in the copolymers was also observed. Thus, AlPcCl has a strong tendency to self-aggregate with increasing solvent polarity, an effect also observed in micellar media

Physico-chemical properties of meso-tetrakis(p-methoxyphenyl)porphyrin (TMPP) incorporated into pluronicTM p-123 and f-127 polymeric micelles

The physicochemical properties (solubilization, structural organization and stability) of meso-tetrakis(p-methoxyphenyl)porphyrin (TMPP), a promising photosensitizer for photodynamic therapy, solubilized in polymeric micelles of tri-block copolymers PluronicTM P-123 and F-127, were studied. The formulations obtained by the solid dispersion method led to monomerization of TMPP in these copolymers. Solubility studies showed that P-123 solubilizes double the photosensitizer than F-127. The self-aggregation phenomenon was affected by the [TMPP]/[poloxamer] ratio and medium temperature. The decrease in the temperature of these systems promoted the formation of different kinds of TMPP aggregates intrinsically connected with the structural changes occurring in the micelles

Physico-chemical properties of meso-tetrakis(p-methoxyphenyl)porphyrin (TMPP) incorporated into pluronicTM p-123 and f-127 polymeric micelles

The physicochemical properties (solubilization, structural organization and stability) of meso-tetrakis(p-methoxyphenyl)porphyrin (TMPP), a promising photosensitizer for photodynamic therapy, solubilized in polymeric micelles of tri-block copolymers PluronicTM P-123 and F-127, were studied. The formulations obtained by the solid dispersion method led to monomerization of TMPP in these copolymers. Solubility studies showed that P-123 solubilizes double the photosensitizer than F-127. The self-aggregation phenomenon was affected by the [TMPP]/[poloxamer] ratio and medium temperature. The decrease in the temperature of these systems promoted the formation of different kinds of TMPP aggregates intrinsically connected with the structural changes occurring in the micelles

Uncommon Sorption Mechanism of Aromatic Compounds onto Poly(Vinyl Alcohol)/Chitosan/Maleic Anhydride-β-Cyclodextrin Hydrogels

Aromatic hydrocarbons are extensive environmental pollutants occurring in both water and air media, and their removal is a priority effort for a healthy environment. The use of adsorbents is among the several strategies used for the remediation of these compounds. In this paper, we aim the synthesis of an amphiphilic hydrogel with the potential for the simultaneous sorption of a set of monocyclic and polycyclic aromatic hydrocarbons associated with toxicity effects in humans. Thus, we start by the synthesis of a copolymer-based in chitosan and β-cyclodextrin previously functionalized with the maleic anhydride. The presence of β-cyclodextrin will confer the ability to interact with hydrophobic compounds. The resulting material is posteriorly incorporated in a cryogel of poly(vinyl alcohol) matrix. We aim to improve the amphiphilic ability of the hydrogel matrix. The obtained hydrogel was characterized by swelling water kinetics, thermogravimetric analysis, rheological measurements, and scanning electron microscopy. The sorption of aromatic hydrocarbons onto the gel is characterized by pseudo-first-order kinetics and Henry isotherm, suggesting a physisorption mechanism. The results show that the presence of maleic anhydride-β-cyclodextrin and chitosan into hydrogels leads to an increase in the removal efficiency of the aromatic compounds. Additionally, the capacity of this hydrogel for removing these pollutants from a fossil fuel sample has also been tested.Rede Nacional de Ressonância Magnética Nuclear (RNRMN

Bactericidal Pectin/Chitosan/Glycerol Films for Food Pack Coatings: A Critical Viewpoint

Pectin and chitosan films containing glycerol (Gly) at 5, 10, 15, 20, 30, and 40 wt % were prepared in an aqueous HCl solution (0.10 M) by the solvent evaporation method. The unwashed film (UF) containing 40 wt % Gly (UF40) had elongation at break (&epsilon;, %) of 19%. Washed films (WFs) had high tensile strength (&sigma; &gt; 46 MPa) and low elongation at break (&epsilon;, &lt;5.0%), enabling their use in food packaging applications. The polymers&rsquo; self-assembling occurred during the washing, increasing the stiffness. The XPS analysis suggests that some HCl is lost during the drying process, resulting in a low acid content on the UF surfaces. The UF40 (at 5.0 mg/mL) exhibits cytocompatibility toward mammalian cells and antimicrobial and anti-adhesive properties against Escherichia coli. The remaining HCl in the UF40 can be a disadvantage for food packaging applications; the UF40 (&empty; = 8.5 mm; 55 &mu;m thickness) releases H3O+/HCl, reducing the pH to approximately 3.0 when kept in 200 mL distilled water for approximately 30 min. Therefore, we propose the use of UF40 to coat commercial food packaging. The UF40 has low permeability to water vapor and oxygen and works as a barrier against ultraviolet light. The UF40 is also colorless and completely transparent. The UF40 maintained tomatoes&rsquo; structural integrity for 18 days at room temperature with no oxidation or microorganism contamination. This paper presents a critical viewpoint concerning chitosan-based films with antimicrobial activities