321 research outputs found
AERODYNAMIC PERFORMANCE ANALYSIS OF CO-FLOW JET AIRFOIL
The work in this paper aims to increase the maximum lift coefficient of the airfoil by implementing the co-flow jet concept on NACA 0018 airfoil and also to investigate the performance of co-flow jet (CFJ) airfoil. To conduct numerical solution, RANS equations have been solved for 2D incompressible and unsteady flow using the Spalart-Allmaras turbulence model. The suction surface of the airfoil is modified by placing the injection slot near the leading edge and the suction slot near the trailing edge. A small mass of air is withdrawn into the airfoil suction slot, pressurized by a pumping system located inside the airfoil, and re-injecting into the injection slot tangentially to the main stream flow. The CFJ airfoil is enhancing the aerodynamic lift coefficient significantly compare to the baseline airfoil. And also, the numerical analysis is carried out to investigate the effect of the location of injection and suction slot. And it is observed that the aerodynamic lift coefficient of CFJ airfoil is increasing with varying the injection slot away from the leading edge
Application of ARIMAX model for forecasting paddy production in Trincomalee district in Sri Lanka
In the post-war climes, the government’s
mandates focus on reviving one of the paddy
production region Trincomalee district in SriLanka to
meet the growing demands of the nation. Such a
rehabilitation program requires the understanding of
how the paddy producing industry has fared along the
historical time-lines. This understanding is essential
for developing the necessary development plans for the
Rice sector.
When an ARIMA model includes other time series as
input variables, the model is referred to as an ARIMAX
model. Pankratz (1991). In this paper, ARIMAX model
has been applied to forecast annual paddy production
with includes rainfall time series as input variable for
both seasons in this district. The validity of the model
is verified with various model selection criteria such as
Adj R2, minimum of AIC and SBC lowest MAPE
value
Simultaneous removal of particles and dissolved organic matter in floating media filter for surface water treatment
This research investigated the performance of floating media filter in removing particles and dissolved organic matter from surface water. Pilot-scale study consists of floating plastic media pre-filter connected with either granular activated carbon (GAC) or sponge biological filter (BF) bed. In the floating plastic media filter, coagulation and flocculation processes using poly-aluminum chloride (PACl) as coagulant at an optimum dose of 8 mg/L helped removing particles from raw water. The floating media filter was operated a filtration rate of 11 m3/m2.h whereas those in GAC and BF units were maintained at 2 m3/m2.h. Continuous operation for over 120 days gave 98% and 99% average removal efficiencies of turbidity and UV254 in floating media filter in combination with GAC unit whereas and 78% and 52% removal efficiencies of turbidity and UV254 removal were obtained in floating media filter in combination with BF. The removal of dissolved organic carbon in GAC and BF units reduced chlorine demand for disinfection by 29% and 14%. It could also reduce the sum of trihalomethane (THMs) ratio from 1.1 to 0.1 and 0.5 respectively. © 2009 Desalination Publications
The degradtion of humic substance using continuous photocatalysis systems
Photocatalytic oxidation is an emerging technology in water and wastewater treatment. Photocatalysis often leads to complete degradation of organic pollutants without the need for chemicals. This study investigated the degradation of humic substances in water using photocatalysis systems coupled with physio-chemical processes such as adsorption and/or flocculation. Dissolved Organic Carbon (DOC) removal of PAC-TiO2 was improved by a factor of two to three times compared with TiO2 alone. Solid Phase Micro Extraction (SPME)/Gas Chromatograph (GC) flame ionisation detector (FID) was used to investigate intermediates of photocatalytic oxidation in a batch reactor with TiO2 alone and with powder activated carbon (PAC) with TiO2. GC peaks showed that PAC-TiO2 adsorbed some by-products which were photo-resistant and prevented the reverse reaction that occurred when TiO2 was used alone. The two other types of photocatalytic reactors used were the continuous photocatalytic reactor and recirculated photocatalytic reactor. The results show that the recirculated reactor had the highest efficiency in removing organic matter in a short photo-oxidation (detention) time of less than 10min. The use of PAC-TiO2 in recirculated continuous reactor resulted in 80% removal of organic matter even when it was operated for a short detention time and allowed the use of a smaller dose of TiO2
In-line flocculation-filtration as pre-treatment to reverse osmosis desalination
In this paper the performance of single and dual media filters with in-line flocculation have been examined as pretreatment to seawater reverse osmosis (SWRO). A comparison of filter performance was made between single medium filter (80 cm) consisting of sand or anthracite, and dual media filter consisting of sand (40 cm at the bottom) and anthracite (40 cm on top). Short term (6 hours) experiments were conducted with in-line coagulation followed by direct filtration. Filtration velocities of 5 m/h and 10 m/h were used. The performances of these filters were assessed in terms of turbidity removal, head loss build-up, and organic compound removal in terms of molecular weight distribution (MWD). The efficiency of the filter as pretreatment was evaluated in terms of silt density index (SDI) and modified fouling index (MFI). It was found that the turbidity removal was high and all the filters produced more or less same quality water. There was a slower buildup of head loss for coarser filter medium. A post treatment of reverse osmosis after an inline-flocculation-dual media filtration showed lower normalized flux decline (J/J0) (0.35 to 0.22 during the first 20 hours operation) while, seawater without any pretreatment showed steeper flux decline (0.18 to 0.11 at first 20 hours operation) in RO. © 2009
Submerged microfiltration coupled with physcio-chemical processes as pretreatment to sea water desalination
In this study, the critical flux of the submerged membrane system was experimentally evaluated when it was used for seawater with and without pre-treatment. In this study, different processes such as flocculation with ferric chloride (FeCl3) and different doses of PAC adsorption were used as a pre-treatment. The pretreatment of flocculant of 2 mg/L of FeCl3 and adsorption with the dose of 1 g/L PAC showed an improvement in the critical flux from 5 L/m2.h to 6.7 L/m2.h and 13.3 L/m2.h respectively. The performance of these pretreatments was also determined in terms of modified fouling index using ultrafilter membrane (UF-MFI). UF-MFI and SDI indicated that PAC adsorption was a better pretreatment than flocculation for the seawater used in this study. Molecular weight distribution (MWD) of seawater organic matter was also examined after different pretreatments. MWD of the raw seawater was mainly in the range from 1510 to 130 Da. It is observed that FeCl3 flocculation and PAC adsorption as pretreatments partially removed the organic matter of 1510 Da and 130Da respectively. © 2009 Desalination Publications
An end-to-end, interactive Deep Learning based Annotation system for cursive and print English handwritten text
With the surging inclination towards carrying out tasks on computational
devices and digital mediums, any method that converts a task that was
previously carried out manually, to a digitized version, is always welcome.
Irrespective of the various documentation tasks that can be done online today,
there are still many applications and domains where handwritten text is
inevitable, which makes the digitization of handwritten documents a very
essential task. Over the past decades, there has been extensive research on
offline handwritten text recognition. In the recent past, most of these
attempts have shifted to Machine learning and Deep learning based approaches.
In order to design more complex and deeper networks, and ensure stellar
performances, it is essential to have larger quantities of annotated data. Most
of the databases present for offline handwritten text recognition today, have
either been manually annotated or semi automatically annotated with a lot of
manual involvement. These processes are very time consuming and prone to human
errors. To tackle this problem, we present an innovative, complete end-to-end
pipeline, that annotates offline handwritten manuscripts written in both print
and cursive English, using Deep Learning and User Interaction techniques. This
novel method, which involves an architectural combination of a detection system
built upon a state-of-the-art text detection model, and a custom made Deep
Learning model for the recognition system, is combined with an easy-to-use
interactive interface, aiming to improve the accuracy of the detection,
segmentation, serialization and recognition phases, in order to ensure high
quality annotated data with minimal human interaction.Comment: 17 pages, 8 figures, 2 table
Submerged membrane filtration adsorption hybrid system for the removal of organic micropollutants from a water reclamation plant reverse osmosis concentrate
© 2016 Elsevier B.V. Reverse osmosis (RO) is a widespread water treatment process utilised in water reuse applications. However, the improper discharge of RO concentrate (ROC) containing organic micropollutants such as pharmaceuticals into the environment may cause potential health risks to non-target species and particularly those in aquatic environments. A study was conducted using a submerged membrane-filtration/granular activated carbon (GAC) adsorption hybrid system to remove organic micropollutants from a water treatment plant ROC by initially adding 10 g GAC /L of membrane reactor volume with 10% daily GAC replacement. The percentage of dissolved organic carbon removal varied from 60% to 80% over an operation lasting 10 days. Removal of organic micropollutants was almost complete for virtually all compounds. Of the 19 micropollutants tested, only two remained (the less hydrophobic DEET 27 ng/L and the hydrophilic sulfamethoxazole 35 ng/L) below 80% removal on day 1, while five of the most hydrophobic micropollutants were detectable in very small concentrations ( 89%–> 99% being removed. High percentages of micropollutants were removed probably because of their high hydrophobicity or they had positive or neutral charges and therefore they were electrostatically adsorbed to the negatively charged GAC
Simultaneous removal of natural organic matter and micro-organic pollutants from reverse osmosis concentrate using granular activated carbon
© 2019 Elsevier Ltd Although reverse osmosis produces high quality reusable water from wastewater the rejected concentrate (ROC) poses potentially serious health hazards to non-target species. This is especially the case when it is disposed into aquatic environments due to the presence of high concentrations of dissolved natural organics, micro-organic pollutants (MOPs) and other pollutants. In batch and column studies we found that granular activated carbon (GAC) was very effective in simultaneously removing dissolved organic carbon (DOC) and 18 MOPs from ROC. The amounts of all DOC fractions adsorbed (0.01–3 mg/g) were much higher than those of the MOPs (0.01–2.5 μg/g) mainly because ROC contained larger concentrations of DOC fractions than MOPs. However, the partition coefficient which is a measure of the adsorbability was higher for most of the MOPs (0.21–21.6 L/g) than for the DOC fractions (0.01–0.45 L/g). The amount of DOC fraction adsorbed was in the order: humics > low molecular weights > building blocks > biopolymers (following mostly their concentrations in ROC). The partition coefficient was in the order: low molecular weigth nuetrals > humics > building blocks > biopolymers. The MOPs were classified into four groups based on their hydrophobicity (log Kow) and charge. The four positively charged MOPs with high hydrophobicity had the highest amounts adsorbed and partition coefficient, with 95–100% removal in the GAC column. The MOPs that are negatively charged, regardless of their hydrophobicity, had the lowest amounts adsorbed and partition coefficient with 73–94% removal
Drug utilization study of antihypertensive drugs in a clinic in Malaysia
Background: Hypertension is one of the common chronic diseases resulting in high mortality and morbidity. A plethora of new drugs are now available, and the quality of life for these patients has been altered for the better. Not many studies are conducted in Malaysia regarding drug utilization of antihypertensives and hence this study was planned.Methods: This was a pilot study conducted in a private clinic in Kuala Lumpur. Thirty patients with hypertension were chosen randomly and their prescriptions were analyzed. The data was collected in a proforma designed for the study. The proforma included variables such as age, gender, drugs used, and also regarding the names of the drugs used (generic or trade). The data was analyzed using descriptive statistics.Results: Thirty patients were recruited for the study. We found that 53% of the patients were females and 47% males. Trade names were more commonly used i.e. 64% of patients, than the generic names. Monotherapy (70%) was more frequently used than combination drugs. Beta blockers (45%) were used more often followed by calcium channel blockers (25%).Conclusions: The incidence of polypharmacy was low. The three most common groups of drugs used in hypertension were beta blockers followed by calcium channel blockers and then angiotensin converting enzyme inhibitors. Drug utilization studies are powerful exploratory tools to ascertain the role of drugs in society.
- …