Exponential Distributions in a Mechanical Model for Earthquakes

We study statistical distributions in a mechanical model for an earthquake fault introduced by Burridge and Knopoff [R. Burridge and L. Knopoff, {\sl Bull. Seismol. Soc. Am.} {\bf 57}, 341 (1967)]. Our investigations on the size (moment), time duration and number of blocks involved in an event show that exponential distributions are found in a given range of the paramenter space. This occurs when the two kinds of springs present in the model have the same, or approximately the same, value for the elastic constants. Exponential distributions have also been seen recently in an experimental system to model earthquake-like dynamics [M. A. Rubio and J. Galeano, {\sl Phys. Rev. E} {\bf 50}, 1000 (1994)].Comment: 11 pages, uuencoded (submitted to Phys. Rev. E

Point-contact spectroscopy on URu2_2Si2_2

Tunnel and point contact experiments have been made in a URu$_2$Si$_2$ single crystal along the c-axis. The experiments were performed changing temperature and contact size in a low temperature scanning tunneling microscope. A resonance develops at the Fermi level at $T\sim 60$ K. This resonance splits and becomes asymmetric when the 17.5 K phase transition is crossed. These results are consistent with the existence of Kondo like bound states of the U$^{4+}$ ionic configurations and the conduction electrons. Below the transition, these configurations are split by the development of quadrupolar ordering. The peak separation can be interpreted as a direct measurement of the order parameter. Measurements on a policrystalline UAu_2Si_2$ sample are also reported, with a comparative study of the behavior of both materials.Comment: 4 pages (Latex) + 2 postscript figure

Optimization conditions of UV-C radiation combined with ultrasound-assisted extraction of cherry tomato (Lycopersicon esculentum) lycopene extract

The aim of this work was to study the effect of UV-C radiation on ultrasound assisted extraction (UAE) of cherry tomato bioactive compounds. Cherry tomatoes were exposed to two UV-C radiation doses (0.5 and 1.0 J cm−2 ) and stored at 20 ± 0.5 oC for 7 days. Next, they were lyophilized, and the bioactive compounds were extracted by UAE at 20 KHz. To evaluate the effectiveness of the extraction process of the bioactive compounds, a CCRD (central composite rotational design) was used together with RSM (response surface methodology), for extraction times from 4 to 12 minutes and concentrations (g of lyophilized product / L of ethanol) of 1:10, 1:20 and 1:30. The extracts obtained from the irradiated tomatoes presented 5.8 times more lycopene content than the controls and higher antioxidant activity was obtained for 4 and 8 min, in the concentrations 1:10 and 1:20 (m v−1). Through numerical model optimization, optimal extraction conditions were obtained. The results demonstrated that by previously irradiating tomatoes with UV-C light, the UAE yielded considerably higher amounts of lycopene and other bioactives.CNPq (National Council of Technological and Scientific Development, Brazil), Erasmus Mundus action 2; Fellow Mundus Project; Department of Chemical Engineering and Food Engineering (UFSC - Brazil) and the Department of Food Engineering (UAlg - Portugal) .info:eu-repo/semantics/publishedVersio

Effect of Static Disorder in an Electron Fabry-Perot Interferometer with Two Quantum Scattering Centers

In a recent paper -- F. Ciccarello \emph{et al.}, New J. Phys. \textbf{8}, 214 (2006) -- we have demonstrated that the electron transmission properties of a one-dimensional (1D) wire with two identical embedded spin-1/2 impurities can be significantly affected by entanglement between the spins of the scattering centers. Such effect is of particular interest in the control of transmission of quantum information in nanostructures and can be used as a detection scheme of maximally entangled states of two localized spins. In this letter, we relax the constraint that the two magnetic impurities are equal and investigate how the main results presented in the above paper are affected by a static disorder in the exchange coupling constants of the impurities. Good robustness against deviation from impurity symmetry is found for both the entanglement dependent transmission and the maximally entangled states generation scheme.Comment: 4 pages, 5 figure

Using the Sound Card as a Timer

Experiments in mechanics can often be timed by the sounds they produce. In such cases, digital audio recordings provide a simple way of measuring time intervals with an accuracy comparable to that of photogate timers. We illustrate this with an experiment in the physics of sports: to measure the speed of a hard-kicked soccer ball.Comment: 3 pages, 4 figures, Late

Chaos and Synchronized Chaos in an Earthquake Model

We show that chaos is present in the symmetric two-block Burridge-Knopoff model for earthquakes. This is in contrast with previous numerical studies, but in agreement with experimental results. In this system, we have found a rich dynamical behavior with an unusual route to chaos. In the three-block system, we see the appearance of synchronized chaos, showing that this concept can have potential applications in the field of seismology.Comment: To appear in Physical Review Letters (13 pages, 6 figures

A Comprehensive View of a Strongly Lensed Planck-Associated Submillimeter Galaxy

We present high-resolution maps of stars, dust, and molecular gas in a strongly lensed submillimeter galaxy (SMG) at z = 3.259. HATLAS J114637.9–001132 is selected from the Herschel-Astrophysical Terahertz Large Area Survey (H-ATLAS) as a strong lens candidate mainly based on its unusually high 500 μm flux density (~300 mJy). It is the only high-redshift Planck detection in the 130 deg^2 H-ATLAS Phase-I area. Keck Adaptive Optics images reveal a quadruply imaged galaxy in the K band while the Submillimeter Array and the Jansky Very Large Array show doubly imaged 880 μm and CO(1→0) sources, indicating differentiated distributions of the various components in the galaxy. In the source plane, the stars reside in three major kpc-scale clumps extended over ~1.6 kpc, the dust in a compact (~1 kpc) region ~3 kpc north of the stars, and the cold molecular gas in an extended (~7 kpc) disk ~5 kpc northeast of the stars. The emissions from the stars, dust, and gas are magnified by ~17, ~8, and ~7 times, respectively, by four lensing galaxies at z ~ 1. Intrinsically, the lensed galaxy is a warm (T_(dust) ~ 40-65 K), hyper-luminous (L_(IR) ~ 1.7 × 10^(13) L_☉; star formation rate (SFR) ~2000 M_☉ yr^(–1)), gas-rich (M_(gas)/M_(baryon) ~ 70%), young (M_(stellar)/SFR ~ 20 Myr), and short-lived (M_(gas)/SFR ~ 40 Myr) starburst. With physical properties similar to unlensed z > 2 SMGs, HATLAS J114637.9–001132 offers a detailed view of a typical SMG through a powerful cosmic microscope

Processing of conductive filled polymers using microinjection

Polystyrene granules were coated by sputtering with an innovative film of stainless steel obtaining this way a composite. To compare results it was necessary to prepare two different composites, mixing polymer granules with steel fibers mechanically in a drum. Microinjection molding is a processing technique that allowed obtaining a representative sample of each composite. Scanning electron microscope (SEM) allowed the characterization of the coating thickness while the dispersion and distribution of metal particles were analyzed by optical microscopy in polarized light. Results showed a uniform thickness of the coating and good dispersion of the reinforcements in the matrix. Electrical and mechanical properties of the composites were characterized by measuring the electrical resistivity and flexural tests. Considerable values of conductivity were exhibited in composites with carbon nanotubes and a slight increase in the modulus of the polymers due to reinforcement incorporation was noticed

Mathematical modeling of handmade recycled paper drying kinetics and sorption isotherms

The objective of this work is to analyze and compare the natural and forced convective drying of handmade recycled paper. Drying of recycled cellulose pulp was carried out under laboratory environment conditions and in a convective dryer with forced air circulation and controlled conditions of air temperature and velocity. The tests were conducted following a two-factor central composed factorial design of experiments, with six runs at the central point. The drying results were analyzed and fitted to mathematical models of Fick, Henderson and Pabis (Fick s modified equation), Page and He (considering the nonlinear Fick effect). The model of Page represented best the experimental data and the one of Henderson and Pabis resulted in an adequate fit for the paper drying kinetics. Sorption isotherms were determined for the dried paper and the models of GAB (Guggenheim-Anderson-de Boer) and GDW (Generalised D Arcy and Watt) resulted in excellent fits of the experimental data. The water sorption mechanism was suggested by the analysis of the calculated parameters of the GDW model.299312Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP

Chaos around a H\'enon-Heiles-inspired exact perturbation of a black hole

A solution of the Einstein's equations that represents the superposition of a Schwarszchild black hole with both quadrupolar and octopolar terms describing a halo is exhibited. We show that this solution, in the Newtonian limit, is an analog to the well known H\'enon-Heiles potential. The integrability of orbits of test particles moving around a black hole representing the galactic center is studied and bounded zones of chaotic behavior are found.Comment: 7 pages Revte