1,440 research outputs found
Study protocol for a double blind, randomised, placebo-controlled trial of continuous subpectoral local anaesthetic infusion for pain and shoulder function following mastectomy: SUB-pectoral Local anaesthetic Infusion following MastEctomy (SUBLIME) study.
INTRODUCTION: Over 16 000 mastectomies are performed in England and Wales annually. Acute postoperative pain and nausea are common. The most frequently occurring long-term complications are chronic pain (up to 50%) and reduced shoulder function (reported at 35%). Regional techniques that improve acute postoperative pain relief may reduce the incidence of these complications. This study assesses the effectiveness of a 24-hour continuous local anaesthetic in the subpectoral plane in improving postoperative pain and quality of life in patients undergoing mastectomy. METHODS AND ANALYSIS: This is a randomised, double blind, placebo-controlled, two-centre, parallel group trial in women undergoing mastectomy with or without axillary involvement. One hundred and sixty participants will be randomised in a 1:1 ratio to receive either 0.25% levobupivacaine or 0.9% saline by subpectoral infusion postoperatively for 24 h. All participants will be provided with an intravenous morphine patient-controlled analgesia (PCA) system. Participants will be followed-up for 24 h in hospital and at approximately 14 days and 6 months postoperatively. Joint primary outcome measures are total morphine consumption and total pain score (captured via patient-recorded visual analogue scale (VAS) 4 hourly) during the first 24 h postoperatively. Primary statistical analysis of total pain is based on the area under the curve of pain versus time graph. Secondary outcomes include PCA attempts in first 24 h; VAS pain scores and shoulder function by goniometry at 24 h, 14 days (approximately) and 6 months; Verbal Rating Scale pain scores in first 24 h; Brief Pain Inventory and Oxford Shoulder Score at 6 months; duration of hospital stay; incidence of postoperative nausea and vomiting; cost-effectiveness. ETHICS AND DISSEMINATION: The study is approved by the South West England Research Ethics Committee (12/SW/0149). RESULTS: will be published in a peer-reviewed journal and presented at local, national and international scientific meetings. TRIAL REGISTRATION: ISRCTN46621916. EudraCT 2011-005775-16
Measurement of web tension distribution by point source pulse excitation
A web is a material that is produced as a continuous sheet and stored in wound roll form. Mechanics of web material handling in production, coating or conditioning, and winding operations affect web uniformity and the material stress/strain state, thus affecting roll quality. In an effort to improve all aspects of web handling procedures, much attention has been focused on acquisition and utilization of on-line web handling process information such as web tension. Tension is a quantity basic to web production and processing yet historically has been difficult to measure except in an average sense. Improvements in on-line tension measurement accuracy have foreseeable application to automated tension control systems and winder maintenance used in modern day web production/processing facilities. This paper describes a new means of noncontacting, local web tension measurement through use of a point source pneumatic excitation coupled to signal acquisition and processing schemes. Advantages of this new system include variable web excitation rate, variable system tuning for different applications, high lateral tension distribution resolution, and compact, easily serviceable transducer head assembly. This work was sponsored through the Web Handling Research Center (WHRC), an NSF funded research facility located at Oklahoma State University in Stillwater, Oklahoma.Mechanical and Aerospace Engineerin
Composite Polarons in Ferromagnetic Narrow-band Metallic Manganese Oxides
A new mechanism is proposed to explain the colossal magnetoresistance and
related phenomena. Moving electrons accompanied by Jahn-Teller phonon and
spin-wave clouds may form composite polarons in ferromagnetic narrow-band
manganites. The ground-state and finite-temperature properties of such
composite polarons are studied in the present paper. By using a variational
method, it is shown that the energy of the system at zero temperature decreases
with the formation of composite polaron; the energy spectrum and effective mass
of the composite polaron at finite temperature is found to be strongly
renormalized by the temperature and the magnetic field. It is suggested that
the composite polaron contribute significantly to the transport and the
thermodynamic properties in ferromagnetic narrow-band metallic manganese
oxides.Comment: Latex, no figur
Investigative Tools and Techniques for Indoor Air Quality Studies
Indoor air quality
problems are diverse and often
complex. Adverse indoor air
quality problems can exist
which create symptomatic
conditions for building
occupants. Often, the exact
cause, or causes, of the
substandard indoor air quality
are unknown. Therefore, an
investigative approach must
usually be taken to identify
the source(s) of the air
quality problem, and if
present, air contaminant
concentrations. As the
general public becomes more
aware of the problems
associated with poor indoor
air quality conditions, an
associated increase in air
quality evaluation requests
can be expected.
This paper discusses some
of the various investigative
tools and techniques that can
be utilized to identify air
quality contaminants when
performing an indoor air
quality evaluation. These
investigative tools and
techniques can be used to
develop a site specific list
of possible contaminants and their sources, and can then be
used to determine which
contaminants are, in fact,
present in adverse
concentrations. Some of the
investigative tools and
techniques to be discussed in
this paper include the
following: visual inspections
and site observations,
information searches, review
of building construction,
review of ventilation systems,
interviews, low and high
volume sampling pumps, flow
and oxygen meters, portable
photoionization and flame
ionization detectors (PID &
FID), various types of vapor
detector tubes, and gas
chromatograph/mass
spectrophotometer (GC/MS)
analysis.
This paper will be an
introductory overview of the
above listed investigative
tools and techniques. The
paper's attempt is to acquaint
the reader with these
investigative tools and
techniques, and how they can
assist the reader in an air
quality evaluation
Investigative Tools and Techniques for Indoor Air Quality Studies
Indoor air quality
problems are diverse and often
complex. Adverse indoor air
quality problems can exist
which create symptomatic
conditions for building
occupants. Often, the exact
cause, or causes, of the
substandard indoor air quality
are unknown. Therefore, an
investigative approach must
usually be taken to identify
the source(s) of the air
quality problem, and if
present, air contaminant
concentrations. As the
general public becomes more
aware of the problems
associated with poor indoor
air quality conditions, an
associated increase in air
quality evaluation requests
can be expected.
This paper discusses some
of the various investigative
tools and techniques that can
be utilized to identify air
quality contaminants when
performing an indoor air
quality evaluation. These
investigative tools and
techniques can be used to
develop a site specific list
of possible contaminants and their sources, and can then be
used to determine which
contaminants are, in fact,
present in adverse
concentrations. Some of the
investigative tools and
techniques to be discussed in
this paper include the
following: visual inspections
and site observations,
information searches, review
of building construction,
review of ventilation systems,
interviews, low and high
volume sampling pumps, flow
and oxygen meters, portable
photoionization and flame
ionization detectors (PID &
FID), various types of vapor
detector tubes, and gas
chromatograph/mass
spectrophotometer (GC/MS)
analysis.
This paper will be an
introductory overview of the
above listed investigative
tools and techniques. The
paper's attempt is to acquaint
the reader with these
investigative tools and
techniques, and how they can
assist the reader in an air
quality evaluation
Conservation of grassland birds in North America: understanding ecological processes in different regions
Many species of birds that depend on grassland or savanna habitats have shown substantial overall population declines in North America. To understand the causes of these declines, we examined the habitat requirements of birds in six types of grassland in different regions of the continent. Open habitats were originally maintained by ecological drivers (continual and pervasive ecological processes) such as drought, grazing, and fire in tallgrass prairie, mixed-grass prairie, shortgrass prairie, desert grassland, and longleaf pine savanna. By contrast, grasslands were created by occasional disturbances (e.g., fires or beaver [Castor canadensis] activity) in much of northeastern North America. The relative importance of particular drivers or disturbances differed among regions. Keystone mammal species grazers such as prairie-dogs (Cynomys spp.) and bison (Bison bison) in western prairies, and dam-building beavers in eastern regions of the continent. Deciduous forests played a crucial, and frequently unappreciated, role in maintaining many grassland systems. Although fire was important in preventing invasion of woody plants in the tallgrass and moist mixed prairies, grazing played a more important role in maintaining the typical grassland vegetation of shortgrass prairies and desert grasslands. Heavy grazing by prairiedogs or bison created a low \u27grazing lawn\u27 that is the preferred habitat for many grassland bird species that are restricted to the shortgrass prairie and desert grasslands. Ultimately, many species of grassland birds are vulnerable because people destroyed their breeding, migratory, and wintering habitat, either directly by converting it to farmland and building lots, or indirectly by modifying grazing patterns, suppressing fires, or interfering with other ecological processes that originally sustained open grassland. Understanding the ecological processes that originally maintained grassland systems is critically important for efforts to improve, restore, or create habitat for grassland birds and other grassland organisms. Consequently, preservation of large areas of natural or seminatural grassland, where these processes can be studied and core populations of grassland birds can flourish, should be a high priority. However, some grassland birds now primarily depend on artificial habitats that are managed to maximize production of livestock, timber, or other products. With a sound understanding of the habitat requirements of grassland birds and the processes that originally shaped their habitats, it should be possible to manage populations sustainably on \u27working land\u27 such as cattle ranches, farms, and pine plantations. Proper management of private land will be critical for preserving adequate breeding, migratory, and winter habitat for grassland and savanna species
An evaluation of Bradfordizing effects
The purpose of this paper is to apply and evaluate the bibliometric method Bradfordizing for information retrieval (IR) experiments. Bradfordizing is used for generating core document sets for subject-specific questions and to reorder result sets from distributed searches. The method will be applied and tested in a controlled scenario of scientific literature databases from social and political sciences, economics, psychology and medical science (SOLIS, SoLit, USB Köln Opac, CSA Sociological Abstracts, World Affairs Online, Psyndex and Medline) and 164 standardized topics. An evaluation of the method and its effects is carried out in two laboratory-based information retrieval experiments (CLEF and KoMoHe) using a controlled document corpus and human relevance assessments. The results show that Bradfordizing is a very robust method for re-ranking the main document types (journal articles and monographs) in today’s digital libraries (DL). The IR tests show that relevance distributions after re-ranking improve at a significant level if articles in the core are compared with articles in the succeeding zones. The items in the core are significantly more often assessed as relevant, than items in zone 2 (z2) or zone 3 (z3). The improvements between the zones are statistically significant based on the Wilcoxon signed-rank test and the paired T-Test
Aerostructural Optimization of Long Span Bridges: Current Advances and Challenges
Structures Congress 2020. 5-8 abril, 2020. St. Louis, Missouri[Abstract] This paper describes the evolution of deck shape of long span bridges since the Tacoma Narrows collapse trying to avoid undesirable aerodynamic behavior under wind flow and the trend in the last decades to increase the length of the main span of suspension and cable stayed bridges. The necessity to use advanced technologies to help the engineer to obtain the best possible design is highlighted and the advantages of applying optimization methodologies is encouraged. It is explained that this approach requires to use only numerical tools and hence to eliminate experimental studies, as wind tunnel tests using reduced models of full bridge of a segment of the deck, and their substitution by computational fluid dynamics (CFD) simulations. After doing so, the current capabilities of this approach are presented and, finally, the problems that need to be solved to have a fully operational methodology able to be implemented in real structures are outlined.This research has been funded by the Spanish Ministry of Economy and Competitiveness in the frame of the research project BIA2016-76656-R and the Galician regional government (including FEDER Funding) reference ED431C 2017/72. M. Cid Montoya has been funded by the Galician regional government (Xunta de Galicia) with reference ED481B 2018/053 and the Fulbright postdoctoral scholarship programXunta de Galicia; ED431C 2017/72Xunta de Galicia; ED481B 2018/05
SAFE, a new therapeutic intervention for families of children with autism: study protocol for a feasibility randomised controlled trial
IntroductionIncidence of autistic traits, mental health problems, stress and poor coping is high among family members of children with autism. These problems are coupled with challenging behaviour among children with autism. Current treatment for these families is disjointed and costly. The need for whole family support is supported by the National Institute for Health and Care Excellence recommendations, developments regarding children’s service provision, research and requests by families of children with autism. Despite evidence that family therapies can provide benefits to these families, efficacy has not been subject to a randomised controlled trial. Systemic Autism-related Family Enabling (SAFE) is a new family therapy intervention designed specifically for families of children with autism. We aim to establish the feasibility of running a fully powered randomised controlled trial to evaluate SAFE.Methods and analysisFamilies of children with autism aged 3–16 years will be invited to participate. Consenting participants will be randomised 2:1 to either SAFE+support as usual or support as usual alone. The proposed primary outcome measure for the main trial will be the Systemic CORE 15. Participants will also complete proposed secondary outcome measures, indexing changes in child behaviour, child-parent attachment, anxiety and depression. Generic health economic outcome measures (EuroQol 5 dimensions and Child Health Utility 9 Dimensions) will also provide data on the feasibility of cost-effectiveness analysis. Questionnaires will be completed at baseline and 32 weeks post-allocation. Data on ability to identify, recruit, randomise, retain and collect data from families, acceptability of outcome measures, adherence of therapists and families to the intervention, appropriateness of resource use questionnaires and effectiveness of training will be collected for feasibility analysis. Qualitative data will also explore acceptability of SAFE and reasons for declining and withdrawing from the study.Ethics and disseminationThe current trial protocol received ethical approval from the South West-Exeter Research Ethics Committee (Ref: 17/SW/0192). The findings of the trial will be disseminated in collaboration with our Family Consultation Group and other partners. Findings will be shared locally, nationally and internationally through events, conferences and published papers.Trial registration numberISCTRN83964946 (Pre-results) IRAS 213527</jats:sec
A comparison of consumer sensory acceptance and value of domestic beef steaks and steaks from a branded, Argentine beef program
To determine consumer sensory acceptance and value of branded, Argentine (grass-finished, aged 30+ d) and domestic (U.S. grain-finished beef, aged 9 d) strip loins were paired based on similar Warner-Bratzler shear force values (P = 0.34) and similar marbling levels (P = 0.82). Consumers in Chicago, IL, and San Francisco, CA (n = 124 per city), evaluated one pair of Argentine and domestic steaks, and had the opportunity to participate in a silent, sealed-bid auction to purchase steaks matching the taste panel samples. Consumers were categorized into three groups based on overall acceptability ratings: 1) those who found Argentine steaks more acceptable, 2) those who found domestic steaks more acceptable, and 3) those who were indifferent. Consumers rated domestic steaks higher (P < 0.05) in juiciness, tenderness, flavor, and overall acceptability. Consumers in both Chicago and San Francisco were willing to pay more (P < 0.05) for domestic steaks (0.52 per 0.45 kg, respectively). In both cities, consumers who found Argentine samples more acceptable were willing to pay more (P < 0.05) for Argentine steaks (1.82 per 0.45 kg in San Francisco), and consumers who found domestic samples more acceptable were willing to pay more (P < 0.05) for domestic steaks (1.34 per 0.45 kg in San Francisco). Consumers who were indifferent were willing to pay similar (P = 0.99) amounts for Argentine and domestic steaks. Although some consumers found Argentine beef more acceptable than domestic beef (19.7 and 16.5% in Chicago and San Francisco, respectively) and were willing to pay more for it, most consumers found domestic beef to be more acceptable (59.0% in Chicago and 61.5% in San Francisco) and were willing to pay more to obtain a more acceptable product
- …