Microwave-Assisted Preparation of High Entropy Alloys

Microwaves at the ISM (Industrial, Scientific and Medical, reserved internationally) frequency of 2450 or 5800 MHz have been used to prepare FeCoNiCuAl, FeCrNiTiAl and FeCoCrNiAl2.5 high entropy alloys by direct heating of pressed mixtures of metal powders. The aim of this work is to explore a new microwave-assisted near-net-shape technology, using a powder metallurgy approach for the preparation of high entropy alloys, able to overcome the limits of current melting technologies (defects formation) or solid state ones (time demanding). High entropy alloy compositions have been selected so as to comprise at least one ferromagnetic element and one highly reactive couple, like Ni-Al, Ti-Al, Co-Al or Fe-Al. Results show that direct microwave heating of the powder precursors occurs, and further heating generation is favored by the ignition of exothermal reactions in the load. Microwaves have been applied both for the ignition and sustaining of such reactions, showing that by the proposed technique, it is possible to control the cooling rate of the newly-synthesized high entropy alloys. Results showed also that microwave heating in predominant magnetic field regions of the microwave applicator is more effective at controlling the cooling rate. The herein proposed microwave-assisted powder metallurgy approach is suitable to retain the shape of the load imparted during forming by uniaxial pressing. The homogeneity of the prepared high entropy alloys in all cases was good, without the dendritic segregation typical of arc melting, even if some partially-unreacted powders were detected in the samples

The most luminous AGN do not produce the majority of the detected stellar-mass black hole binary mergers in the local Universe

Despite the increasing number of Gravitational Wave (GW) detections, the astrophysical origin of Binary Black Hole (BBH) mergers remains elusive. A promising formation channel for BBHs is inside accretion discs around supermassive black holes, that power Active Galactic Nuclei (AGN). In this paper, we test for the first time the spatial correlation between observed GW events and AGN. To this end, we assemble all sky catalogues with 1,412 (242) AGN with a bolometric luminosity greater than $10^{45.5} {\rm erg\ s}^{-1}$ ($10^{46}\,{\rm erg\,s}^{-1}$) with spectroscopic redshift of $z\leq0.3$ from the Milliquas catalogue, version 7.7b. These AGN are cross-matched with localisation volumes of BBH mergers observed in the same redshift range by the LIGO and Virgo interferometers during their first three observing runs. We find that the fraction of the detected mergers originated in AGN brighter than $10^{45.5}\,{\rm erg\,s}^{-1}$ ($10^{46}\,{\rm erg\,s}^{-1}$) cannot be higher than $0.49$ ($0.17$) at a 95 per cent credibility level. Our upper limits imply a limited BBH merger production efficiency of the brightest AGN, while most or all GW events may still come from lower luminosity ones. Alternatively, the AGN formation path for merging stellar-mass BBHs may be actually overall subdominant in the local Universe. To our knowledge, ours are the first observational constraints on the fractional contribution of the AGN channel to the observed BBH mergers.Comment: 11 pages, 5 figures, 2 table

Microwave processing of high entropy alloys: A powder metallurgy approach

Microwaves at the ISM frequency of 2450 and 5800 MHz have been exploited to prepare FeCoNiCrAl-family high entropy alloys by direct heating of pressed mixtures of metal powders. The aim of this work is to explore a new microwave assisted near-net-shape technology, using powder metallurgy approach for the preparation of high entropy alloys, able to overcome the limits of current melting technologies (defects formation) or solid state ones (time demanding). Results show that direct microwave heating of the powder precursors occurs, and further heating generation is favored by the ignition of exothermal reactions in the compound. Microwave processing, exploited both for the ignition and sustaining of such reactions, has been compared to reactive sintering in laboratory furnace and mechanical alloying in a planetary ball milling. Results demonstrate that microwave required the shortest time and lowest energy consumption, thus it is promising time- and cost-saving synthetic route

Al, cu and zr addition to high entropy alloys: The effect on recrystallization temperature

The equimolar Cr, Mn, Fe, Co and Ni alloy, first produced in 2004, was unexpectedly found to be single-phase. Consequently, a new concept of materials was developed: high entropy alloys (HEA) forming a single solid-solution with a near equiatomic composition of the constituting elements. In this study, an equimolar CoCrFeMnNi HEA was modified by the addition of 5 at% of either Al, Cu or Zr. The cold-rolled alloys were annealed for 30 minutes at high temperature to investigate the recrystallization kinetics. The evolution of the grain boundary and the grain size were investigated, from the as-cast to the recrystallized state. Results show that the recrystallized single phase FCC structures exhibits different twin grains density, grain size and recrystallization temperatures as a function of the at.% of modifier alloying elements added. In comparison to the equimolar CoCrFeMnNi, the addition of modifier elements increases significantly the recrystallization temperature after cold deformation. The sluggish diffusion (typical of HEA alloys), the presence of a solute in solid solution as well as the low twin boundary energy are responsible for the lower driving force for recrystallization

Procedure to generate a selection chart for microwave sol-gel synthesis of nanoparticles

Numerical simulation is used to compare the temperature distribution existing during microwave or conven-tional heating by hot oil bath of a reaction volume. The simulation is applied to the sol-gel synthesis of TiO2 nanopowders, considering temperature dependent materials parameters. A WR340-based single mode applicator operating at 2.45 GHz is considered, with a cylindrical load positioned in regions of predominant electric field. A temperature homogeneity index, defined as the ratio between the average temperature and its standard deviation at a certain time, is used to compare homogeneity of conventional and microwave heating at different power densities, from 370 to 7400 W/L. Based on that comparison, a selection chart of the more homogenous heating process as a function of power density and average temperature of the reaction volume is defined and can be used to select the experimental conditions expected to lead to a more or less homogeneous particle size of the products. A dedicated instrumented model, including three optical fibres, is developed as well, for validation purposes. Experimental validation showed a very good predictive capability of the model, with errors on estimated tem-perature lower than 3 degrees C at temperatures lower than 80 degrees C

Decreased Immunoreactivity of CD99 Is an Independent Predictor of Regional Lymph Node Metastases in Pulmonary Carcinoid Tumors

n/

Trastuzumab and Gemcitabine in Pretreated HER2 Overexpressing Metastatic Breast Cancer Patients: Retrospective Analysis of Our Series

Trastuzumab-based regimes improved clinical outcome in women with overexpressing HER2 metastatic breast cancer, mainly due to the availability of different combination therapies, clinically active and well tolerated. In this study we retrospectively evaluated clinical activity and toxicity of trastuzuamb plus gemcitabine regimen in heavily pretreated HER2 positive metastatic breast cancer patients. Although the observed population was heavily pretreated, the evaluated regimen was notably effective in terms of response rate, time to progression and survival, with very mild toxicity. These data suggest that in over expressing HER2 metastatic breast cancer patients, sequential trastuzumab based chemotherapeutic regimens can achieve good response rate with prolonged TTP in responding patients, even after other target therapy such as lapatinib based combinations

Influence of process parameters and alloying type on properties of laser quenched PM-steels

Different alloyed PM steels have been laser quenched in industrial equipment laser diodes (4 kW, controlled by material surface temperature). The aim of this work is to investigate their responses to different process condition and different alloying metals, i.e. Cu, Ni, Mo, Cr and C. Furthermore the microstructure of hardened layer, heat affected zone (HAZ) and bulk zone Pre-alloyed, diffusion bonded and hybrid raw materials have been used. Design of Experiments has been the approach for evaluating the effect of treatment parameters (i.e temperature, spot size and speed) and to develop predictive models, correlating such parameters to hardening depth and scratch hardness number. Results demonstrated which valuable properties could be achieved, even through relatively low alloying. The promising results are encouraging since they allow to forecast a possible positive combination of high local hardness and wear resistance of high precision PM part

Dog craniometry: a cadaveric study

The morphology of canine head differs greatly among breeds, so that they have been categorized in 3 groups (brachycephalic, mesaticephalic and dolichocephalic) based on craniometric measurements. However, several dog breeds are still unclassified, and skull measurements, often analyzed in adult dogs, are rarely studied in dog puppies. The aim of this work is to clarify whether dog puppies can be classified as dolichocephalic, mesaticephalic and brachycephalic. The skulls of spontaneously dead dog puppies aged 0 to 57 days were studied by using the following anatomic and radiographic measurements and indices: Skull Length, Cranial Length, Facial Length, Cranial Width, Skull Width, Cranial Index (CI), Skull Index (SI); radiographic Condylobasal Length, S-index and Facial Index were added. A new index, the modified-Skull Index, was created. Pearson test, ANOVA and neural nets were used in the statistical analysis. 173 dogs from 36 breeds were included in the study. Anatomic and radiographic CI and SI were significantly correlated (p<0,05). Almost all the anatomic and radiographic measurement significantly differed between brachycephalic and mesaticephalic breeds (p<0,05), while dolichocephalic breeds showed intermediate features. The new modified skull index was significantly different among the three classes (p<0,05). The neural nets allowed to classify three previously unclassified breeds. With this work it was proved that many breeds can be classified as brachycephalic, mesaticephalic or dolichocephalic as early as up to 2 months after birth, and some previously unclassified breeds were also classified. A new useful craniometric index was introduced. Finally, cadavers proved to be a very good model for dog craniometric studies