FSS-based approach for the power transmission enhancement through electrically small apertures

Cataloged from PDF version of article.In this paper, a novel approach, based on the employment of frequency selective surfaces, to enhance the power transmission through sub-wavelength apertures at the microwave frequencies is presented. A heuristic interpretation of the phenomenon is given, as well as an analytical model, based on the transmission line network representation. Finally, the performance of the proposed structure is validated through a set of full-wave numerical simulations. © 2011 Springer-Verlag

Enhanced Coupling Values in Coupled Microstrip Lines using Metamaterials

In this paper, we show how metamaterials can be used to enhance the coupling values of microstrip directional couplers. Coupling between regular coplanar microstrip lines, in fact, is limited, due to the small ratios between the characteristic impedances of even and odd TEM modes supported by the structure. The broadside configuration or the employment of an overlay are often utilized to overcome this limitation, leading, however, to more bulky components. On the other hand, the employment of metamaterials with a negative real part of the permittivity is able to increase the coupling values, while keeping the profile of the structure very low. A quasi-static model of the structure is developed and physical insights on the operation of the proposed component and on the role of the metamaterial loading are also given. Simple design formulae derived through a conformal mapping technique are presented and validated through proper full wave numerical simulations

Optimization and tunability of deep subwavelength resonators for metamaterial applications: complete enhanced transmission through a subwavelength aperture

Cataloged from PDF version of article.In the present work, we studied particle candidates for metamaterial applications, especially in terms of their electrical size and resonance strength. The analyzed particles can be easily produced via planar fabrication techniques. The electrical size of multi-split ring resonators, spiral resonators, and multi-spiral resonators are reported as a function of the particle side length and substrate permittivity. The study is continued by demonstrating the scalability of the particles to higher frequencies and the proposition of the optimized particle for antenna, absorber, and superlens applications: a multi-spiral resonator with lambda/30 electrical size operating at 0.810 GHz. We explain a method for tuning the resonance frequency of the multi-split structures. Finally, we demonstrate that by inserting deep subwavelength resonators into periodically arranged subwavelength apertures, complete transmission enhancement can be obtained at the magnetic resonance frequency. (C) 2009 Optical Society of Americ

Miniaturized negative permeability materials

Cataloged from PDF version of article.Experimental and numerical studies of mu-negative (MNG) materials such as multisplit ring resonators (MSRRs) and spiral resonators (SRs) are presented. The resonance frequency of the structures is determined by the transmission measurements and minimum electrical size of lambda(0)/17 for the MSRRs and of lambda(0)/82 for the SRs observed. These MNG materials can be easily produced by the well developed printed circuit board and optical lithography techniques. They are promising elements for the development of high resolution metamaterial lenses and electrically small antennas. (c) 2007 American Institute of Physics

Design of Miniaturized Narrowband Absorbers Based on Resonant-Magnetic Inclusions

Cataloged from PDF version of article.In this paper, we present the design of miniaturized narrowband-microwave absorbers based on different kinds of magnetic inclusions. The operation of the proposed components originates from the resonance of a planar array of inclusions excited by an incoming wave with a given polarization. As in common absorber layouts, a 377 Omega resistive sheet is also used to absorb the electromagnetic energy of the impinging field. Since the planar array of magnetic inclusions behaves at its resonance as a perfect magnetic conductor, the resistive sheet is placed in close proximity of the resonating inclusions, without perturbing their resonance condition. In contrast to other typical absorber configurations presented in the literature, the absorber proposed in this paper is not backed by a metallic plate. This feature may be useful for stealth applications, as discussed thoroughly in the paper. The other interesting characteristic of the proposed absorbers is the subwavelength thickness, which has shown to depend only on the geometry of the basic resonant inclusions employed. At first, regular split-ring resonators (SSRs) disposed in an array configuration are considered and some application examples are presented. Absorbers based on SRRs are shown to reach thickness of the order of lambda(0)/20. In order to further squeeze the electrical thickness of the absorbers, multiple SRRs and spiral resonators are also used. The employment of such inclusions leads to the design of extremely thin microwave absorbers, whose thickness may even be close to lambda(0)/100. Finally, some examples of miniaturized absorbers suitable for a practical realization are proposed

The PKU & ME study: A qualitative exploration, through co-creative sessions, of attitudes and experience of the disease among adults with phenylketonuria in Italy

Background: Phenylketonuria (PKU) is a hereditary metabolic disease that can be diagnosed and successfully treated from birth with a lifelong phenylalanine-restricted dietary regimen. However, optimal adherence to diet remains an issue and often progressively decreases after adolescence. The study aimed to explore the experience of adults living with PKU in order to gain insights related to their adherence to diet and engagement in managing their condition. Methods: The study adopted a qualitative methodology in sessions that combined specifically designed co- creation exercises with focus group discussion. Adults with early-treated classic PKU were enrolled for 2 different sessions - one for adherent and one for non-adherent patients. The verbatim notes of both sessions and focus group were analyzed using content analysis. Results: Twelve adherent and nine non-adherent adults with PKU participated. Besides the behavioral dictates of following a strict diet, adherent adults reported a positive mental approach and organizational rigor; they seemed aware of the consequences of high-phenylalanine levels, reporting that it can affect mood and conse- quently social interactions which they value highly. In the non-adherent group, the individuals seemed to not fully accept their disease: they were aware of the consequences of non-adherence in children but not in adults, they felt the management of PKU was an individual burden and they experienced a feeling of \u2018diversity\u2019 in the social context (related to eating) that caused emotional distress. PKU seemed a very influential element of the identity both for adherent and non-adherent adults, but with different consequences for the two groups. Finally, all participants reported the desire to be assisted in a healthcare setting dedicated to adults. Conclusions: The findings expand the understanding of the psychological experience of adult patients with PKU in relation to their disease and its dietary requirements, highlighting specific factors that might drive tailored educational or psychological intervention to improve adherence and engagement in the care process

Equivalent-Circuit Models for the Design of Metamaterials Based on Artificial Magnetic Inclusions

Cataloged from PDF version of article.In this paper, we derive quasi-static equivalent-circuit models for the analysis and design of different types of artificial magnetic resonators-i.e., the multiple split-ring resonator, spiral resonator, and labyrinth resonator-which represent popular inclusions to synthesize artificial materials and metamaterials with anomalous values of the permeability in the microwave and millimeter-wave frequency ranges. The proposed models, derived in terms of RLC equivalent circuits, represent an extension of the models presented in a recent publication. In particular, the extended models take into account the presence of a dielectric substrate hosting the metallic inclusions and the losses due to the finite conductivity of the conductors and the finite resistivity of the dielectrics. Exploiting these circuit models, it is possible to accurately predict not only the resonant frequency of the individual inclusions, but also their quality factor and the relative permeability of metamaterial samples made by given arrangements of such inclusions. Finally, the three models have been tested against full-wave simulations and measurements, showing a good accuracy. This result opens the door to a quick and accurate design of the artificial magnetic inclusions to fabricate real-life metamaterial samples with anomalous values of the permeability

Resonant artificial structures to achieve extraordinary transmission at microwaves

In this contribution, the role of artificial resonant structures in increasing the transmission through sub-wavelength apertures is discussed. Those devices are capable to enhance the aperture equivalent electric and magnetic dipole moments and, consequently, the overall power transmission. The design details are given and the enhancement performances are then illustrated through the use of full-wave simulations. Such structures may find applications in different fields, such as high-resolution spatial filters, ultra-diffractive imaging systems, etc © 2010 EuMA

Scattering cancellation by metamaterial cylindrical multilayers

In this paper, we present the theoretical analysis and the design of cylindrical multilayered electromagnetic cloaks based on the scattering cancellation technique. We propose at first the analysis and the design of bi-layered cylindrical shells, made of homogenous and isotropic metamaterials, in order to effectively reduce the scattered field from a dielectric cylindrical object. The single shell and the bi-layered shell cases are compared in terms of scattering reduction and loss effects. The comparison shows that the bi-layered configuration exhibits superior performances. The scattering cancellation approach, is, then, extended to the case of generic multilayered cylindrical shells, considering again homogeneous and isotropic metamaterials. The employment of the proposed technique to the case of cloaking devices working at multiple frequencies is also envisaged and discussed. Finally, some practical layouts of cylindrical electromagnetic cloaks working at optical frequencies are also proposed. In these configurations, the homogenous and isotropic metamaterials are replaced by their actual counterparts, obtained using alternating stacked plasmonic and non-plasmonic layers. The theoretical formulation and the design approaches presented throughout the paper are validated through proper full-wave numerical simulations

Optimization and tunability of deep subwavelength resonators for metamaterial applications: complete enhanced transmission through a subwavelength aperture

In the present work, we studied particle candidates for metamaterial applications, especially in terms of their electrical size and resonance strength. The analyzed particles can be easily produced via planar fabrication techniques. The electrical size of multi-split ring resonators, spiral resonators, and multi-spiral resonators are reported as a function of the particle side length and substrate permittivity. The study is continued by demonstrating the scalability of the particles to higher frequencies and the proposition of the optimized particle for antenna, absorber, and superlens applications: a multi-spiral resonator with ë/30 electrical size operating at 0.810 GHz. We explain a method for tuning the resonance frequency of the multi-split structures. Finally, we demonstrate that by inserting deep subwavelength resonators into periodically arranged subwavelength apertures, complete transmission enhancement can be obtained at the magnetic resonance frequency. © 2009 Optical Society of America