56 research outputs found
Damage of the Interface Between an Orthodontic Bracket and Enamel â the Effect of Some Elastic Properties of the Adhesive Material
The aim of this study was to investigate the magnitude of debonding stress of an orthodontic bracket bonded to the enamel with resin systems having different elastic properties. For the same purpose, sixty human premolars were randomly divided into four groups according to the adhesive system used for bonding brackets: G Fix flowable resin (GFI) with Everstick NET (ESN), GFI, G Aenial Universal Flow (GAU) with ESN, and GAU. The brackets were stressed in the occlusogingival direction on a universal testing machine. The values of debonding load and displacement were determined at the point of debonding. The elastic modulus of the tested materials was determined using nanoindentation. An analysis of variance showed a significant difference in the loads required to debond the bracket among the groups tested. The GAU group had the highest elastic modulus, followed by the GFI and ESN groups. ARI (Adhesive Remnant Index) scores demonstrated more remnants of the adhesive material on the bracket surface with adhesives having a higher elastic modulus. Taking into consideration results of the present in-vitro study, it can be concluded that the incorporation of a glass-fiber-reinforced composite resin (FRC) with a low elastic modulus between the orthodontic bracket and enamel increases the debonding force and strain more than with adhesive systems having a higher elastic modulus.</p
Transmission of Curing Light through Moist, Air-Dried, and EDTA Treated Dentine and Enamel
Objective. This study measured light transmission through enamel and dentin and the effect of exposed dentinal tubules to light propagation. Methods. Light attenuation through enamel and dentin layers of various thicknesses (1 mm, 2 mm, 3 mm, and 4 mm) was measured using specimens that were (1) moist and (2) air-dried (n = 5). Measurements were repeated after the specimens were treated with EDTA. Specimens were transilluminated with a light curing unit (maximum power output 1869 mW/cm(2)), and the mean irradiance power of transmitting light was measured. The transmission of light through teeth was studied using 10 extracted intact human incisors and premolars. Results. Transmitted light irradiance through 1 mm thick moist discs was 500 mW/cm(2) for enamel and 398 mW/cm(2) for dentin (p < 0.05). The increase of the specimen thickness decreased light transmission in all groups (p < 0.005), and moist specimens attenuated light less than air-dried specimens in all thicknesses (p < 0.05). EDTA treatment increased light transmission from 398 mW/cm(2) to 439 mW/cm(2) (1 mm dentin specimen thickness) (p < 0.05). Light transmission through intact premolar was 6.2 mW/cm(2) (average thickness 8.2 mm) and through incisor was 37.6 mW/cm(2) (average thickness 5.6 mm). Conclusion. Light transmission through enamel is greater than that through dentin, probably reflecting differences in refractive indices and extinction coefficients. Light transmission through enamel, dentin, and extracted teeth seemed to follow Beer-Lambert's law
DNA barcoding reveals widespread occurrence of Leptidea juvernica (Lepidoptera: Pieridae) in southern Finland
Skeletal growth in class II malocclusion from childhood to adolescence: does the profile straighten?
BACKGROUND
There is relatively little appreciation of the changes in maxillary-mandibular relationships occurring during adolescence among subjects with normal and increased overjet. The aim of this study was to assess differences in changes in maxillo-mandibular relationships during the adolescent growth period based on the presence of a normal (â4âmm) overjet in childhood. Our hypothesis was that there is no difference in the change of the A point, nasion, B point (ANB) angle during growth between these two overjet groups. Lateral cephalograms were obtained from 65 subjects taken from the American Association of Orthodontists Foundation (AAOF) Craniofacial Growth Legacy Collections Project. Cephalograms were obtained at ages 7-10 (T0) and 14-17 (T1) with allocation into two groups based on baseline overjet (>â4âmm: group 1, 2-4âmm: group 2). Random effects linear regression was used to account for multiple within -patient measurements with dependent variables including antero-posterior skeletal pattern (based on sella, nasion, A point (SNA); sella, nasion, B point (SNB); and ANB angles).
RESULTS
We included a similar number of males (n = 34; 52.3%) and females (n = 31; 47.7%). The mean ANB was higher at baseline in group 1 (5.42, SD 2.16°) than in group 2 (3.08, SD 1.91°). The hypothesis was rejected as the ANB angle reduced by 1.92° more in the larger overjet group with the association being statistically significant after accounting for age and gender (P â4âmm overjet group compared to the 2-4âmm group (0.857°, P = 0.271; 95% CI -â0.669 to 2.383). The SNB angle increased by 1.15° more in the higher overjet group but there was only weak evidence of an association (P = 0.086; 95% CI -â2.464 to 0.164).
CONCLUSIONS
A slight straightening of the facial profile was observed in both groups with a statistically significant greater reduction in ANB arising in the group with larger baseline overjet. This translated into a marginal reduction in the overjet in this group
Dental Occlusion in a Split Amazon Indigenous Population: Genetics Prevails over Environment
Background: Studies examining human and nonhuman primates have supported the hypothesis that the recent increase in
the occurrence of misalignment of teeth and/or incorrect relation of dental arches, named dental malocclusion, is mainly
attributed to the availability of a more processed diet and the reduced need for powerful masticatory action. For the first
time on live human populations, genetic and tooth wear influences on occlusal variation were examined in a split
indigenous population. The Arara-Iriri people are descendants of a single couple expelled from a larger village. In the
resultant village, expansion occurred through the mating of close relatives, resulting in marked genetic cohesion with
substantial genetic differences.
Methodology/Principal Findings: Dental malocclusion, tooth wear and inbreeding coefficient were evaluated. The sample
examined was composed of 176 individuals from both villages. Prevalence Ratio and descriptive differences in the
outcomes frequency for each developmental stage of the dentition were considered. Statistical differences between the
villages were examined using the chi-square test or Fisherâs exact statistic. Tooth wear and the inbreeding coefficient (F)
between the villages was tested with Mann-Whitney statistics. All the statistics were performed using two-tailed distribution
at p#0.05. The coefficient inbreeding (F) confirmed the frequent incestuous unions among the Arara-Iriri indigenous group.
Despite the tooth wear similarities, we found a striking difference in occlusal patterns between the two Arara villages. In the
original village, dental malocclusion was present in about one third of the population; whilst in the resultant village, the
occurrence was almost doubled. Furthermore, the morphological characteristics of malocclusion were strongly different
between the groups.
Conclusions/Significance: Our findings downplay the widespread influence of tooth wear, a direct evidence of what an
individual ate in the past, on occlusal variation of living human populations. They also suggest that genetics plays the most
important role on dental malocclusion etiology
Extending Epigenesis: From Phenotypic Plasticity to the Bio-Cultural Feedback
The paper aims at proposing an extended notion of epigenesis acknowledging an actual causal import to the phenotypic dimension for the evolutionary diversification of life forms. Section 1 offers introductory remarks on the issue of epigenesis contrasting it with ancient and modern preformationist views. In Section 2 we propose to intend epigenesis as a process of phenotypic formation and diversification a) dependent on environmental influences, b) independent of changes in the genomic nucleotide sequence, and c) occurring during the whole life span. Then, Section 3 focuses on phenotypic plasticity and offers an overview of basic properties (like robustness, modularity and degeneracy) that allows biological systems to be evolvable â i.e. to have the potentiality of producing phenotypic variation. Successively (Section 4), the emphasis is put on environmentally-induced modification in the regulation of gene expression giving rise to phenotypic variation and diversification. After some brief considerations on the debated issue of epigenetic inheritance (Section 5), the issue of culture (kept in the background of the preceding sections) is considered. The key point is that, in the case of humans and of the evolutionary history of the genus Homo at least, the environment is also, importantly, the cultural environment. Thus, Section 6 argues that a bio-cultural feedback should be acknowledged in the âepigenicâ processes leading to phenotypic diversification and innovation in Homo evolution. Finally, Section 7 introduces the notion of âcultural neural reuseâ, which refers to phenotypic/neural modifications induced by specific features of the cultural environment that are effective in human cultural evolution without involving genetic changes. Therefore, cultural neural reuse may be regarded as a key instance of the bio-cultural feedback and ultimately of the extended notion of epigenesis proposed in this work
Human mandibular shape is associated with masticatory muscle force
Understanding how and to what extent forces applied to the mandible by the masticatory muscles influence its form, is of considerable importance from clinical, anthropological and evolutionary perspectives. This study investigates these questions. Head CT scans of 382 adults were utilized to measure masseter and temporalis muscle cross-sectional areas (CSA) as a surrogate for muscle force, and 17 mandibular anthropometric measurements. Sixty-two mandibles of young individuals (20-40 years) whose scans were without artefacts (e.g., due to tooth filling) were segmented and landmarked for geometric morphometric analysis. The association between shape and muscle CSA (controlled for size) was assessed using two-block partial least squares analysis. Correlations were computed between mandibular variables and muscle CSAs (all controlled for size). A significant association was found between mandibular shape and muscle CSAs, i.e. larger CSAs are associated with a wider more trapezoidal ramus, more massive coronoid, more rectangular body and a more curved basal arch. Linear measurements yielded low correlations with muscle CSAs. In conclusion, this study demonstrates an association between mandibular muscle force and mandibular shape, which is not as readily identified from linear measurements. Retrodiction of masticatory muscle force and so of mandibular loading is therefore best based on overall mandibular shape
Genetic aspects of dental disorders
The document attached has been archived with permission from the Australian Dental Association. An external link to the publisherâs copy is included.This paper reviews past and present applications of quantitative and molecular genetics to dental disorders. Examples are given relating to craniofacial development (including malocclusion), oral supporting tissues (including periodontal diseases) and dental hard tissues (including defects of enamel and dentine as well as dental caries). Future developments and applications to clinical dentistry are discussed. Early investigations confirmed genetic bases to dental caries, periodontal diseases and malocclusion, but research findings have had little impact on clinical practice. The complex multifactorial aetiologies of these conditions, together with methodological problems, have limited progress until recently. Present studies are clarifying previously unrecognized genetic and phenotypic heterogeneities and attempting to unravel the complex interactions between genes and environment by applying new statistical modelling approaches to twin and family data. linkage studies using highly polymorphic DNA markers are providing a means of locating candidate genes, including quantitative trait loci (QTL). In future, as knowledge increases: it should be possible to implement preventive strategies for those genetically-predisposed individuals who are identified-predisposed individuals who are identified to be at risk.Grant C. Townsend, Michael J. Aldred and P. Mark Bartol
ConsideraçÔes para elaboração de protocolo de assistĂȘncia ortodĂŽntica em saĂșde coletiva
- âŠ