Spatial Pattern Formation During Aggregation of the Slime Mould Dictyostelium discoideum

Stream formation and spiral wave behaviour during the aggregation of Dictyostelium discoideum (Dd) are studied in a model based on the Martiel-Goldbeter equations for cAMP relay, combined with chemotactic motion of Dd cells. The results show that stream formation occurs if the turnover rate of intracellular cAMP is increased. This increase in the turnover rate of cAMP[in] leads to a dependence of the speed of the cAMP wave on the cell density. We propose that this dependence of wave speed on cell density is the underlying mechanism for stream formation. Besides stream formation, increasing the turnover rate of cAMP[in] also results in a spiral wave period that decreases during aggregation, a phenomenon that is commonly observed in situ. Furthermore, the dependence of wave speed on cell density is measured empirically[ The speed of the cAMP wave is found to decrease as the wave travels from high to low cell density. This indicates that in situ, wave speed does depend on cell density

Local-field correction to one- and two-atom van der Waals interactions

Based on macroscopic quantum electrodynamics in linearly and causally responding media, we study the local-field corrected van der Waals potentials and forces for unpolarized ground-state atoms placed within a magnetoelectric medium of arbitrary size and shape. We start from general expressions for the van der Waals potentials in terms of the (classical) Green tensor of the electromagnetic field and the atomic polarizability and incorporate the local-field correction by means of the real-cavity model. In this context, special emphasis is given to the decomposition of the Green tensor into a medium part multiplied by a global local-field correction factor and, in the single-atom case, a part that only depends on the cavity characteristics. The result is used to derive general formulas for the local-field corrected van der Waals potentials and forces. As an application, we calculate the van der Waals potential between two ground-state atoms placed within magnetoelectric bulk material.Comment: 9 pages, 2 figures, corrections according to erratu

Factors associated with positive urine cultures in cats with subcutaneous ureteral bypass system implantation

Objectives The aims of this study were to report the postoperative incidence of subcutaneous ureteral bypass (SUB)-associated bacteriuria and risk factors in a large population of UK cats, to identify the commonly implicated isolates in these cases and to report associations of positive postoperative urine cultures with device occlusion or a need for further surgery. Methods Electronic clinical records were reviewed to identify cats with ureteral obstruction that underwent unilateral or bilateral SUB implantation between September 2011 and September 2019. In total, 118 client-owned cats were included in the study population. Information recorded included signalment, history, surgical and biochemical factors, urinalysis and culture results. Multivariable logistic regression was performed to identify variables associated with a positive postoperative culture. Results In total, 10 cats (8.5%) had a positive postoperative culture within 1 month postsurgery and 28 cats (23.7%) within 1 year postsurgery. Cats with a positive preoperative culture were significantly more likely to have a positive culture within 6 months postoperatively (odds ratio [OR] 4.09, 95% confidence interval [CI] 1.18–14.18; P = 0.026). Of the 14 cats with a positive preoperative culture, six (42.9%) returned a positive culture within 1 year postoperatively, and in four cases (66.7%) the same isolate was identified. Cats with a higher end-anaesthetic rectal temperature were significantly less likely to return a positive culture within 3 months (OR 0.398, 95% CI 0.205–0.772; P = 0.006) postsurgery. Cats culturing positive for Escherichia coli at any time point (OR 4.542, 95% CI 1.485–13.89; P = 0.008) were significantly more likely to have their implant removed or replaced. Conclusions and relevance Perioperative hypothermia and preoperative positive culture were independent predictors of a postoperative positive culture and this should be taken into consideration when managing these cases. Positive postoperative culture rates were higher than have previously been reported

Streaming instability of slime mold amoebae: An analytical model

During the aggregation of amoebae of the cellular slime mould Dictyostelium, the interaction of chemical waves of the signaling molecule cAMP with cAMP-directed cell movement causes the breakup of a uniform cell layer into branching patterns of cell streams. Recent numerical and experimental investigations emphasize the pivotal role of the cell-density dependence of the chemical wave speed for the occurrence of the streaming instability. A simple, analytically tractable, model of Dictyostelium aggregation is developed to test this idea. The interaction of cAMP waves with cAMP-directed cell movement is studied in the form of coupled dynamics of wave front geometries and cell density. Comparing the resulting explicit instability criterion and dispersion relation for cell streaming with the previous findings of model simulations and numerical stability analyses, a unifying interpretation of the streaming instability as a cAMP wave-driven chemotactic instability is proposed

Living biointerfaces based on non-pathogenic bacteria to direct cell differentiation

Genetically modified Lactococcus lactis, non-pathogenic bacteria expressing the FNIII7-10 fibronectin fragment as a protein membrane have been used to create a living biointerface between synthetic materials and mammalian cells. This FNIII7-10 fragment comprises the RGD and PHSRN sequences of fibronectin to bind α5β1 integrins and triggers signalling for cell adhesion, spreading and differentiation. We used L. lactis strain to colonize material surfaces and produce stable biofilms presenting the FNIII7-10 fragment readily available to cells. Biofilm density is easily tunable and remains stable for several days. Murine C2C12 myoblasts seeded over mature biofilms undergo bipolar alignment and form differentiated myotubes, a process triggered by the FNIII7-10 fragment. This biointerface based on living bacteria can be further modified to express any desired biochemical signal, establishing a new paradigm in biomaterial surface functionalisation for biomedical applications

Particles at oil–air surfaces : powdered oil, liquid oil marbles, and oil foam

The type of material stabilized by four kinds of fluorinated particles (sericite and bentonite platelet clays and spherical zinc oxide) in air–oil mixtures has been investigated. It depends on the particle wettability and the degree of shear. Upon vigorous agitation, oil dispersions are formed in all the oils containing relatively large bentonite particles and in oils of relatively low surface tension (γla < 26 mN m⁻¹) like dodecane, 20 cS silicone, and cyclomethicone containing the other fluorinated particles. Particle-stabilized oil foams were obtained in oils having γla > 26 mN m⁻¹ where the advancing air–oil–solid contact angle θ lies between ca. 90° and 120°. Gentle shaking, however, gives oil-in-air liquid marbles with all the oil–particle systems except for cases where θ is <60°. For oils of tension >24 mN m⁻¹ with omniphobic zinc oxide and sericite particles for which advancing θ ≥ 90°, dry oil powders consisting of oil drops in air which do not leak oil could be made upon gentle agitation up to a critical oil:particle ratio (COPR). Above the COPR, catastrophic phase inversion of the dry oil powders to air-in-oil foams was observed. When sheared on a substrate, the dry oil powders containing at least 60 wt % of oil release the encapsulated oil, making these materials attractive formulations in the cosmetic and food industries

Attachment of Salmonella strains to a plant cell wall model is modulated by surface characteristics and not by specific carbohydrate interactions

Background: Processing of fresh produce exposes cut surfaces of plant cell walls that then become vulnerable to human foodborne pathogen attachment and contamination, particularly by Salmonella enterica. Plant cell walls are mainly composed of the polysaccharides cellulose, pectin and hemicelluloses (predominantly xyloglucan). Our previous work used bacterial cellulose-based plant cell wall models to study the interaction between Salmonella and the various plant cell wall components. We demonstrated that Salmonella attachment was favoured in the presence of pectin while xyloglucan had no effect on its attachment. Xyloglucan significantly increased the attachment of Salmonella cells to the plant cell wall model only when it was in association with pectin. In this study, we investigate whether the plant cell wall polysaccharides mediate Salmonella attachment to the bacterial cellulose-based plant cell wall models through specific carbohydrate interactions or through the effects of carbohydrates on the physical characteristics of the attachment surface. Results: We found that none of the monosaccharides that make up the plant cell wall polysaccharides specifically inhibit Salmonella attachment to the bacterial cellulose-based plant cell wall models. Confocal laser scanning microscopy showed that Salmonella cells can penetrate and attach within the tightly arranged bacterial cellulose network. Analysis of images obtained from atomic force microscopy revealed that the bacterial cellulose-pectin-xyloglucan composite with 0.3 % (w/v) xyloglucan, previously shown to have the highest number of Salmonella cells attached to it, had significantly thicker cellulose fibrils compared to other composites. Scanning electron microscopy images also showed that the bacterial cellulose and bacterial cellulose-xyloglucan composites were more porous when compared to the other composites containing pectin. Conclusions: Our study found that the attachment of Salmonella cells to cut plant cell walls was not mediated by specific carbohydrate interactions. This suggests that the attachment of Salmonella strains to the plant cell wall models were more dependent on the structural characteristics of the attachment surface. Pectin reduces the porosity and space between cellulose fibrils, which then forms a matrix that is able to retain Salmonella cells within the bacterial cellulose network. When present with pectin, xyloglucan provides a greater surface for Salmonella cells to attach through the thickening of cellulose fibrils

Antibacterial activity and mode of action of selected glucosinolate hydrolysis products against bacterial pathogens

Plants contain numerous components that are important sources of new bioactive molecules with antimicrobial properties. Isothiocyanates (ITCs) are plant secondary metabolites found in cruciferous vegetables that are arising as promising antimicrobial agents in food industry. The aim of this study was to assess the antibacterial activity of two isothiocyanates (ITCs), allylisothiocyanate (AITC) and 2-phenylethylisothiocyanate (PEITC) against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Listeria monocytogenes. The antibacterial mode of action was also characterized by the assessment of different physiological indices: membrane integrity, intracellular potassium release, physicochemical surface properties and surface charge. The minimum inhibitory concentration (MIC) of AITC and PEITC was 100 g/mL for all bacteria. The minimum bactericidal concentration (MBC) of the ITCs was at least 10 times higher than the MIC. Both AITC and PEITC changed the membrane properties of the bacteria decreasing their surface charge and compromising the integrity of the cytoplasmatic membrane with consequent potassium leakage and propidium iodide uptake. The surface hydrophobicity was also non-specifically altered (E. coli and L. monocytogenes become less hydrophilic; P. aeruginosa and S. aureus become more hydrophilic). This study shows that AITC and PEITC have strong antimicrobial potential against the bacteria tested, through the disruption of the bacterial cell membranes. Moreover, phytochemicals are highlighted as a valuable sustainable source of new bioactive products.This work was supported by the Operational Programme for Competitiveness Factors - COMPETE and by the Portuguese Foundation for Science and Technology through Project Phytodisinfectants - PTDC/DTP-SAP/1078/2012 (COMPETE: FCOMP-01-0124-FEDER-028765), the PhD grant awarded to Ana Abreu (SFRH/BD/84393/2012), and the post-doctoral grants awarded to Anabela Borges (SFRH/BPD/98684/2013) and Lucia C. Simoes (SFRH/BPD/81982/2011). Also, this work was undertaken as part of the European Research Project SUSCLEAN (Contract no FP7-KBBE-2011-5, project number: 287514) and the COST Action FA1202. The authors are solely responsible for this work. It does not represent the opinion of the European Community, and the Community is not responsible for any use that might be made of data appearing herein

Characterization of optical properties and surface roughness profiles: The Casimir force between real materials

The Lifshitz theory provides a method to calculate the Casimir force between two flat plates if the frequency dependent dielectric function of the plates is known. In reality any plate is rough and its optical properties are known only to some degree. For high precision experiments the plates must be carefully characterized otherwise the experimental result cannot be compared with the theory or with other experiments. In this chapter we explain why optical properties of interacting materials are important for the Casimir force, how they can be measured, and how one can calculate the force using these properties. The surface roughness can be characterized, for example, with the atomic force microscope images. We introduce the main characteristics of a rough surface that can be extracted from these images, and explain how one can use them to calculate the roughness correction to the force. At small separations this correction becomes large as our experiments show. Finally we discuss the distance upon contact separating two rough surfaces, and explain the importance of this parameter for determination of the absolute separation between bodies.}Comment: 33 pages, 14 figures, to appear in Springer Lecture Notes in Physics, Volume on Casimir Physics, edited by Diego Dalvit, Peter Milonni, David Roberts, and Felipe da Ros

Wettability Modification of Nanomaterials by Low-Energy Electron Flux

Controllable modification of surface free energy and related properties (wettability, hygroscopicity, agglomeration, etc.) of powders allows both understanding of fine physical mechanism acting on nanoparticle surfaces and improvement of their key characteristics in a number of nanotechnology applications. In this work, we report on the method we developed for electron-induced surface energy and modification of basic, related properties of powders of quite different physical origins such as diamond and ZnO. The applied technique has afforded gradual tuning of the surface free energy, resulting in a wide range of wettability modulation. In ZnO nanomaterial, the wettability has been strongly modified, while for the diamond particles identical electron treatment leads to a weak variation of the same property. Detailed investigation into electron-modified wettability properties has been performed by the use of capillary rise method using a few probing liquids. Basic thermodynamic approaches have been applied to calculations of components of solid–liquid interaction energy. We show that defect-free, low-energy electron treatment technique strongly varies elementary interface interactions and may be used for the development of new technology in the field of nanomaterials