166 research outputs found
Effect of random axial curvature of a thin-walled beam on its loadcarrying capacity
Tento článek se zabývá analýzou únosnosti tlačeného ocelového prutu tenkostěnného
otevřeného i uzavřeného průřezu, jehož osa je náhodně prostorově zakřivená. Počáteční zakřivení je
modelováno náhodným polem za pomoci metody LHS. Únosnost tlačeného prutu je pak vypočítána
geometricky nelineárním řešením v programu ANSYS. Výsledky jsou prezentovány jak
v histogramech, tak v tabulce a je provedeno srovnání únosností prutů jednotlivých průřezů mezi
sebou a s hodnotami návrhové únosnosti podle normy.The paper deals with the analysis of load-carrying capacity (LCC) of a steel beam under
compression which axis is randomly spatially curved. Open and close thin-walled cross-sections are
considered for the beam, respectively. The initial curvature is modelled by a random field. The Latin
Hypercube Sampling Method was applied. The load carrying capacity is calculated by geometrically
nonlinear solution by ANSYS software. The results are presented both in histograms and in a table.
The LCC statistical characteristics of beams with open and closed cross-sections have been
compared. A comparison with the LCC according to the standards is carried out as well
Lateral-torsional buckling of a beam with initial imperfections
Článek se zabývá statistickou analýzou únosnosti prostě uloženého ohýbaného nosníku
průřezu IPE 220 řešeného geometricky nelineárním řešením s vlivem klopení. Prut byl modelován
v programu ANSYS s pomocí prvku BEAM188. Imperfekce byly uvažovány jako náhodné veličiny.
Počáteční zakřivení a rotace osy jsou uvažovány ve tvaru jedné půlvlny funkce sinus. Korelace mezi
amplitudami počátečního zakřivení a počáteční rotace osy je uvažována jako parametr řešení na
intervalu od -1 do 1. Je studován vliv této korelace na změnu střední hodnoty a směrodatné odchylky
náhodné únosnosti.The paper deals with a statistical analysis of a simply supported hot-rolled beam IPE 220 in
bending which was analysed with respect to lateral-torsional buckling using geometric nonlinear
solution. The beam was simulated in ANSYS program using beam element BEAM188. All initial
imperfections were considered to be random variables. Initial curvature and rotation of the beam axis
had a shape of half-wave sine function. Correlation between the amplitudes of initial curvature and
initial rotation of the beam axis was a parameter of the solution within the interval from -1 to 1.
Influence of this correlation upon the variance of the mean value and standard deviation of the loadcarrying
capacity was carried out
FEM Modelling of Lateral-Torsional Buckling Using Shell and Solid Elements
The paper describes two methods of FEM modelling of I-section beams loaded by bending moments. Series of random realizations with initial imperfections following the first eigenmode of lateral-torsional buckling were created. Two independent FEM software products were used for analyses of resistance. At the end the difference and correlation between the results as well as advantages and disadvantages of both methods are discussed. (C) 2017 Published by Elsevier Ltd
COMPENSATION OF SPRINGBACK IN LARGE SHEET METAL FORMING
A precise production of sheet metal parts has always been a main goal in press shops. Highest quality demands are required especially in automotive production. Unfortunately, even today, the production is not optimal due to an ineffective approach to the springback compensation. Springback results in geometrical shape inaccuracies of the obtained product. Based on the current approach, excessive time and financial costs emerge due to corrections on the press tools. However, these corrections do not always lead to a better accuracy of the stampings. The main objective of the research is to design a modified solution of the current approach. The modified solution is designed as a methodology with a focus on the analysis and compensation of the springback with a help of a numerical simulation. To achieve the main goal, smaller sub-goals are employed. These sub-goals, or rather experiments, mainly focus on parameters, which, more or less, influence the springback phenomenon. The designed methodology is verified with real car body parts and is carried out with a help of the department of the press tools design in ŠKODA AUTO, a.s. There, the methodology is used for improving the accuracy of the stamping process of the car body parts and for improving the quality of the final product
Business Plan - Establishment of Company for Selling Protein Powders
Předmětem diplomové práce je tvorba podnikatelského plánu pro založení společnosti na výrobu a prodej trojkombinace příchutí proteinových doplňků výživy. V první části práce jsou popsány teoretická východiska. V druhé fázi jsou provedeny všechny potřebné analýzy prostředí například konkurence nebo průzkumu trhu. A na závěr je zpracovaná kalkulace výrobku, finanční plán atd, kde ze všech výsledků dojdeme k závěru, jeslti je podnik realizovatelný.The subject of this diploma thesis is creation of business plan for founding a company, whitch focuses on production and selling trio-flavor protein powder. In first part of this thesis, I focused on theory. In second part can be found all kinds of analysis, for example competition, market research, to be sure we are entering right market. In final part there is calculation for product, financial plan and so on, where from all relevant information will be decided, if the company is realisable.
The Graphic Interface for the Radiolocation System
Import 03/11/2016Cílem této bakalářské práce je návrh a implementace aplikace, sloužící jako grafické rozhraní pro vizualizaci dat pasivního radiolokačního systému. V práci popisuji princip pasivní radiolokace, uvádím možnosti implementace komunikačního protokolu mezi radiolokátorem a zařízením s operačním systémem Android, zabývám se architekturou této platformy a důvody její popularity, porovnávám způsoby ukládání a exportu dat z perzistentního úložiště, navrhuji uživatelské prostředí a vysvětluji implementaci samotné aplikace. Závěrem provádím zhodnocení funkčnosti vytvořeného vizualizačního řešení.The goal of this bachelor thesis is to design and implement a mobile application, which serves as a graphical user interface for visualisation of data acquired from a passive radiolocation system. In the following text I describe the principle of passive radiolocation, suggest ways to establish a communication protocol between the system and a device running on the Android operating system, detail the architecture of this platform, compare different ways of importing and exporting data from the persistent application storage, design a user interface and explain the implementation of said application. To conclude the thesis I evaluate the functionality of the created visualisation solution.460 - Katedra informatikyvelmi dobř
- …