Choline-based eutectic mixtures as catalysts for effective synthesis of cyclic carbonates from epoxides and CO2

CO2 is a renewable, abundant and cheap C1-feedstock and its conversion to cyclic carbonates starting from epoxides has been widely explored in the last years. Nevertheless, conducting this reaction under mild and sustainable conditions is still a challenging task. Herein we present the use of choline-salt based eutectic mixtures as catalysts for the reaction of CO2 with epoxides to give cyclic carbonates. Choline chloride and choline iodide have been coupled with various hydrogen bond donors (HBDs), mainly cheap and bio-based carboxylic acids and polyols, to form two classes of eutectic mixtures. Very good yields were achieved under mild conditions (80 \u25e6C in 7\u201322 h) for various terminal epoxides, with both classes of catalysts. While a pressure of 0.4 MPa of CO2 is required to obtain appreciable conversions using choline chloride-based mixture, atmospheric pressure of CO2 (balloon) has been successfully used with choline iodide-based mixtures. Furthermore, the catalysts could be recycled without appreciable loss of the catalytic activity. The improved catalytic performance of both cholinebased eutectic mixtures is attributed to the synergistic activity of the halide, responsible for the opening of the epoxy-ring, and the HBD that has a role in the stabilization of the alkoxide intermediate

Multidifferential study of identified charged hadron distributions in ZZ-tagged jets in proton-proton collisions at s=\sqrt{s}=13 TeV

Jet fragmentation functions are measured for the first time in proton-proton collisions for charged pions, kaons, and protons within jets recoiling against a $Z$ boson. The charged-hadron distributions are studied longitudinally and transversely to the jet direction for jets with transverse momentum 20 $< p_{\textrm{T}} < 100$ GeV and in the pseudorapidity range $2.5 < \eta < 4$. The data sample was collected with the LHCb experiment at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 1.64 fb$^{-1}$. Triple differential distributions as a function of the hadron longitudinal momentum fraction, hadron transverse momentum, and jet transverse momentum are also measured for the first time. This helps constrain transverse-momentum-dependent fragmentation functions. Differences in the shapes and magnitudes of the measured distributions for the different hadron species provide insights into the hadronization process for jets predominantly initiated by light quarks.Comment: All figures and tables, along with machine-readable versions and any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-013.html (LHCb public pages

Study of the B−→Λc+Λˉc−K−B^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-} decay

The decay $B^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-}$ is studied in proton-proton collisions at a center-of-mass energy of $\sqrt{s}=13$ TeV using data corresponding to an integrated luminosity of 5 $\mathrm{fb}^{-1}$ collected by the LHCb experiment. In the $\Lambda_{c}^+ K^{-}$ system, the $\Xi_{c}(2930)^{0}$ state observed at the BaBar and Belle experiments is resolved into two narrower states, $\Xi_{c}(2923)^{0}$ and $\Xi_{c}(2939)^{0}$, whose masses and widths are measured to be $$m(\Xi_{c}(2923)^{0}) = 2924.5 \pm 0.4 \pm 1.1 \,\mathrm{MeV}, \\ m(\Xi_{c}(2939)^{0}) = 2938.5 \pm 0.9 \pm 2.3 \,\mathrm{MeV}, \\ \Gamma(\Xi_{c}(2923)^{0}) = \phantom{000}4.8 \pm 0.9 \pm 1.5 \,\mathrm{MeV},\\ \Gamma(\Xi_{c}(2939)^{0}) = \phantom{00}11.0 \pm 1.9 \pm 7.5 \,\mathrm{MeV},$$ where the first uncertainties are statistical and the second systematic. The results are consistent with a previous LHCb measurement using a prompt $\Lambda_{c}^{+} K^{-}$ sample. Evidence of a new $\Xi_{c}(2880)^{0}$ state is found with a local significance of $3.8\,\sigma$, whose mass and width are measured to be $2881.8 \pm 3.1 \pm 8.5\,\mathrm{MeV}$ and $12.4 \pm 5.3 \pm 5.8 \,\mathrm{MeV}$, respectively. In addition, evidence of a new decay mode $\Xi_{c}(2790)^{0} \to \Lambda_{c}^{+} K^{-}$ is found with a significance of $3.7\,\sigma$. The relative branching fraction of $B^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-}$ with respect to the $B^{-} \to D^{+} D^{-} K^{-}$ decay is measured to be $2.36 \pm 0.11 \pm 0.22 \pm 0.25$, where the first uncertainty is statistical, the second systematic and the third originates from the branching fractions of charm hadron decays.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-028.html (LHCb public pages

LHCb upgrade software and computing : technical design report

This document reports the Research and Development activities that are carried out in the software and computing domains in view of the upgrade of the LHCb experiment. The implementation of a full software trigger implies major changes in the core software framework, in the event data model, and in the reconstruction algorithms. The increase of the data volumes for both real and simulated datasets requires a corresponding scaling of the distributed computing infrastructure. An implementation plan in both domains is presented, together with a risk assessment analysis

Physics case for an LHCb Upgrade II - Opportunities in flavour physics, and beyond, in the HL-LHC era

The LHCb Upgrade II will fully exploit the flavour-physics opportunities of the HL-LHC, and study additional physics topics that take advantage of the forward acceptance of the LHCb spectrometer. The LHCb Upgrade I will begin operation in 2020. Consolidation will occur, and modest enhancements of the Upgrade I detector will be installed, in Long Shutdown 3 of the LHC (2025) and these are discussed here. The main Upgrade II detector will be installed in long shutdown 4 of the LHC (2030) and will build on the strengths of the current LHCb experiment and the Upgrade I. It will operate at a luminosity up to 2×1034 cm−2s−1, ten times that of the Upgrade I detector. New detector components will improve the intrinsic performance of the experiment in certain key areas. An Expression Of Interest proposing Upgrade II was submitted in February 2017. The physics case for the Upgrade II is presented here in more depth. CP-violating phases will be measured with precisions unattainable at any other envisaged facility. The experiment will probe b → sl+l−and b → dl+l− transitions in both muon and electron decays in modes not accessible at Upgrade I. Minimal flavour violation will be tested with a precision measurement of the ratio of B(B0 → μ+μ−)/B(Bs → μ+μ−). Probing charm CP violation at the 10−5 level may result in its long sought discovery. Major advances in hadron spectroscopy will be possible, which will be powerful probes of low energy QCD. Upgrade II potentially will have the highest sensitivity of all the LHC experiments on the Higgs to charm-quark couplings. Generically, the new physics mass scale probed, for fixed couplings, will almost double compared with the pre-HL-LHC era; this extended reach for flavour physics is similar to that which would be achieved by the HE-LHC proposal for the energy frontier

Measurement of the ratios of branching fractions R(D∗)\mathcal{R}(D^{*}) and R(D0)\mathcal{R}(D^{0})

The ratios of branching fractions $\mathcal{R}(D^{*})\equiv\mathcal{B}(\bar{B}\to D^{*}\tau^{-}\bar{\nu}_{\tau})/\mathcal{B}(\bar{B}\to D^{*}\mu^{-}\bar{\nu}_{\mu})$ and $\mathcal{R}(D^{0})\equiv\mathcal{B}(B^{-}\to D^{0}\tau^{-}\bar{\nu}_{\tau})/\mathcal{B}(B^{-}\to D^{0}\mu^{-}\bar{\nu}_{\mu})$ are measured, assuming isospin symmetry, using a sample of proton-proton collision data corresponding to 3.0 fb${ }^{-1}$ of integrated luminosity recorded by the LHCb experiment during 2011 and 2012. The tau lepton is identified in the decay mode $\tau^{-}\to\mu^{-}\nu_{\tau}\bar{\nu}_{\mu}$. The measured values are $\mathcal{R}(D^{*})=0.281\pm0.018\pm0.024$ and $\mathcal{R}(D^{0})=0.441\pm0.060\pm0.066$, where the first uncertainty is statistical and the second is systematic. The correlation between these measurements is $\rho=-0.43$. Results are consistent with the current average of these quantities and are at a combined 1.9 standard deviations from the predictions based on lepton flavor universality in the Standard Model.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-039.html (LHCb public pages

CO2 utilization and alternative solvents: effective tools for sustainable applications

The growing concentration of CO2 in the atmosphere and its harmful consequences has led the scientific community to direct its efforts towards sustainable processes. Among the possible approaches, the use of CO2 and alternative solvents are two strategies that are having widespread diffusion. In this work the reuse of CO2 is expressed by using it as a reaction reagent and as trigger to change the physical properties of a catalyst thus facilitating its recovery. As regards the CO2 use as reagent, two catalytic systems have been developed for the conversion of CO2 and epoxides into cyclic carbonates, used in the synthesis of polymers and as aprotic solvents. Homogeneous catalysts made by choline-based eutectic mixtures and heterogeneous catalysts made from biopolymers and waste pyrolysis have been synthesized and tested on this reaction. The carbonate interchange reaction (CIR) of a diol with a linear carbonate (as dimethyl carbonate) is an interesting alternative, for the synthesis of cyclic carbonates; as the second application of CO2 as polarity trigger, it was used for catalyst recovery. In fact DBU, here used as catalyst, is part of the so called “switchable solvents”: they can pass from a less-polar to a more-polar form (and from being soluble to non-soluble in the reaction mixture) when reacting with CO2 in presence of water or alcohols. Also in this case, heterogeneous catalysts made from biopolymers and waste pyrolysis have been synthesized and tested on CIR. As for the use of alternative solvents, this work focuses on the use of Deep Eutectic Solvents (DESs). They are a new generation of solvents composed by a mixture of two or more substances, liquid at room temperature, and non-volatile. New and biobased DESs were here used: i) as reaction media to carry out chemoenzymatic epoxidation; ii) in the extraction of astaxanthin from microalgae culture

The impact of a structured intensive modular training in the learning curve of robot assisted radical prostatectomy

Aim: The success of Robot Assisted Laparoscopic Prostatectomy (RALP) is mainly due to his relatively short learning curve. Twenty cases are needed to reach a “4 hours-proficiency”. However, to achieve optimal functional outcomes such as urinary continence and potency recovery may require more experience. We aim to report the perioperative and early functional outcomes of patients undergoing RALP, after a structured modular training program. Methods: A surgeon with no previous laparoscopic or robotic experience attained a 3 month modular training including: a) e-learning; b) assistance and training to the operating table; c) dry console training; d) step by step in vivo modular training performing 40 surgical steps in increasing difficulty, under the supervision of an experienced mentor. Demographics, intraoperative and postoperative functional outcomes were recorded after his first 120 procedures, considering four groups of 30 cases. Results: All procedures were completed successfully without conversion to open approach. Overall 19 (15%) post operative complications were observed and 84% were graded as minor (Clavien I-II). Overall operative time and console time gradually decreased during the learning curve, with statistical significance in favour of Group 4. The overall continence rate at 1 and 3 months was 74% and 87% respectively with a significant improvement in continence rate throughout the four groups (p = 0.04). Considering those patients submitted to nerve-sparing procedure we found a significant increase in potency recovery over the four groups (p = 0.04) with the higher potency recovery rate up to 80% in the last 30 cases. Conclusions: Optimal perioperative and functional outcomes have been attained since early phase of the learning curve after an intensive structured modular training and less than 100 consecutive procedures seem needed in order to achieve optimal urinary continence and erectile function recovery