Environmental assessment of domestic boilers: A comparison of condensing and traditional technology using life cycle assessment methodology

This study has carried out a life cycle assessment of two different domestic natural gas boilers in Italy, taking into account 3 different climatic regions and two dwellings with different energy classes. The aim of this research was to compare traditional and condensing boiler technologies. Primary data relating to the two products under analysis was supplied by an international boiler manufacturer, whilst the Ecoinvent database v2.2 was used as a secondary source of data. The assessment was performed using the CML and Cumulative Energy Demand (CED) methods, by considering the categories required by “Environmental Product Declaration” (EPD) certification systems. The results of the analysis show that on average, the condensing technology has a 23% lower environmental impact than its traditional counterpart for each scenario in the six impact categories considered. This is essentially due to its lower fuel consumption during the use phase and the lower levels of CO and NOx emitted during the combustion of natural gas. The study also shows that the use phase is by far the biggest contributor to the environmental impact, and on average is responsible for more than 90% of the total impact

The impact of RFID technologies on inventory accuracy in the apparel retailing: Evidence from the field

In this paper, we assess the level of inventory accuracy that can be reached by adopting radio frequency identification (RFID) technology for inventory count operations in the fashion retailing. Thanks to an in-field implementation, we carried out two series of RFID inventory counts and compared the resulting accuracy level with that obtained exploiting the traditional barcode (BC) technology, so as to highlight the main pros and cons of the RFID adoption. As a general conclusion, the findings from the experimental campaigns and the analyses carried out suggest that RFID inventory counts are more reliable thanBCones. Moreover, under several circumstances, RFID allows detecting out-of-stock situations that are not evident when using either the BC technology or the inventory data stored in the company\u2019 information system. From those findings, a trend of the inventory accuracy as a function of the time required for RFID inventory counts is empirically derived. Such a trend can be exploited in practical cases to estimate the accuracy level achievable with inventory counts depending on the time dedicated to those activities

Plastic or glass: a new environmental assessment with a marine litter indicator for the comparison of pasteurized milk bottles

AbstractPurposeToday plastic is the most used material for food packaging, but its incorrect disposal is creating environmental issues to oceans, soil and air. Someone believes that the solution is to ban plastic and substitute it with glass packaging. Is it the right choice? This study aims at comparing the environmental impact of bottles made of PET, R-PET, non-returnable glass and returnable glass in order to understand which is the most environmental friendly packaging solution.MethodsA literature analysis on the environmental impact of glass and PET bottles is carried out, taking into account their production, transport and disposal phase. Then, an environmental assessment of PET, R-PET, glass and returnable glass bottles, used to package 1 l of pasteurized milk, has been carried out using the life cycle assessment methodology and a new indicator. Inventory data were provided by an important milk processing and packaging factory located in Italy. Results were estimated using some relevant impact categories of the ReCiPe 2016 MidPoint (H) method, then a marine litter indicator (MLI) has been proposed in order to evaluate the polluting potential of milk bottles dispersed into the Mediterranean Sea.Results and discussionLCA results show that R-PET bottle gives the lowest contribution to global warming, stratospheric ozone depletion, terrestrial acidification, fossil resource scarcity, water consumption and human carcinogenic toxicity, followed by PET bottle, returnable glass bottle, and finally non-returnable glass bottle. Glass is the worst packaging option because of high energy demand in the bottle production and its weight and in the transport phase. Some improvements can be obtained with returnable glass, but even if we consider that a bottle could be reused eight times, results are not comparable to the PET or R-PET bottles used only once. However, according to the MLI, returnable glass bottles become the first option, because a lot of plastic bottles could potentially be dispersed into the sea.ConclusionsThe substitution of plastic with glass does not help to reduce the GWP and others LCI categories, while could contribute to reduce the marine litter: overall it is important to dispose correctly packaging materials, investing in recycling and reusing. In particular, great improvements can be obtained using bottles made with recycled materials, as R-PET. In conclusion, it is necessary to disadvantage waste dispersion, giving incentives to returnable packaging and raising people awareness of environmental problems

Analysis and testing of an online solution to monitor and solve safety issues for industrial systems

n/

Sustainability of food waste biorefinery: A review on valorisation pathways, techno-economic constraints, and environmental assessment

The need to increase circularity of industrial systems to address limited resources availability and climate change has triggered the development of the food waste biorefinery concept. However, for the development of future sustainable industrial processes focused on the valorisation of food waste, critical aspects such as (i) the technical feasibility of the processes at industrial scale, (ii) the analysis of their techno-economic potential, including available quantities of waste, and (iii) a life cycle-based environmental assessment of benefits and burdens need to be considered. The goal of this review is to provide an overview of food waste valorisation pathways and to analyse to which extent these aspects have been considered in the literature. Although a plethora of food waste valorisation pathways exist, they are mainly developed at lab-scale. Further research is necessary to assess upscaled performance, feedstock security, and economic and environmental assessment of food waste valorisation processes

Wearable and interactive mixed reality solutions for fault diagnosis and assistance in manufacturing systems: Implementation and testing in an aseptic bottling line

Abstract Thanks to the spread of technologies stemming from the fourth industrial revolution, also the topic of fault diagnosis and assistance in industrial contexts has benefited. Indeed, several smart tools were developed for assisting with maintenance and troubleshooting, without interfering with operations and facilitating tasks. In line with that, the present manuscript aims at presenting a web smart solution with two possible applications installed on an Android smartphone and Microsoft HoloLens. The solution aims at alerting the operators when an alarm occurs on a machine through notifications, and then at providing the instructions needed for solving the alarm detected. The two devices were tested by the operators of an industrial aseptic bottling line consisting of five machines in real working conditions. The usability of both devices was positively rated by these users based on the System Usability Scale (SUS) and additional appropriate statements. Moreover, the in situ application brought out the main difficulties and interesting issues for the practical implementation of the solutions tested

Is the haematopoietic effect of testosterone mediated by erythropoietin? The results of a clinical trial in older men

The stimulatory effects of testosterone on erythropoiesis are very well known, but the mechanisms underlying the erythropoietic action of testosterone are still poorly understood, although erythropoietin has long been considered a potential mediator. A total of 108 healthy men >65 years old with serum testosterone concentration <475 ng/dL were recruited by direct mailings to alumni of the University of Pennsylvania and Temple University, and randomized to receive a 60-cm(2) testosterone or placebo patch for 36 months. Ninety-six subjects completed the trial. We used information and stored serum specimens from this trial to test the hypothesis that increasing testosterone increases haemoglobin by stimulating erythropoietin production. We used information of 67 men, 43 in the testosterone group and 24 in the placebo group who had banked specimens available for assays of testosterone, haemoglobin and erythropoietin at baseline and after 36 months. The original randomized clinical study was primarily designed to verify the effects of testosterone on bone mineral density. The primary outcome of this report was to investigate whether or not transdermal testosterone increases haemoglobin by increasing erythropoietin levels. The mean age +/- SD of the 67 subjects at baseline was 71.8 +/- 4.9 years. Testosterone replacement therapy for 36 months, as compared with placebo, induced a significant increase in haemoglobin (0.86 +/- 0.31 g/dL, p = 0.01), but no change in erythropoietin levels (-0.24 +/- 2.16 mIU/mL, p = 0.91). Included time-varying measure of erythropoietin did not significantly account for the effect of testosterone on haemoglobin (Treatment-by-time: beta = 0.93, SE = 0.33, p = 0.01). No serious adverse effect was observed. Transdermal testosterone treatment of older men for 36 months significantly increased haemoglobin, but not erythropoietin levels. The haematopoietic effect of testosterone does not appear to be mediated by stimulation of erythropoietin production

Digital twin reference model development to prevent operators' risk in process plants

In the literature, many applications of Digital Twin methodologies in the manufacturing, construction and oil and gas sectors have been proposed, but there is still no reference model specifically developed for risk control and prevention. In this context, this work develops a Digital Twin reference model in order to define conceptual guidelines to support the implementation of Digital Twin for risk prediction and prevention. The reference model proposed in this paper is made up of four main layers (Process industry physical space, Communication system, Digital Twin and User space), while the implementation steps of the reference model have been divided into five phases (Development of the risk assessment plan, Development of the communication and control system, Development of Digital Twin tools, Tools integration in a Digital Twin perspective and models and Platform validation). During the design and implementation phases of a Digital Twin, different criticalities must be taken into consideration concerning the need for deterministic transactions, a large number of pervasive devices, and standardization issues. Practical implications of the proposed reference model regard the possibility to detect, identify and develop corrective actions that can affect the safety of operators, the reduction of maintenance and operating costs, and more general improvements of the company business by intervening both in strictly technological and organizational terms

Segmental transverse colectomy. Minimally invasive versus open approach: results from a multicenter collaborative study

none65noThe role of minimally invasive surgery in the treatment of transverse colon cancer is still controversial. The aim of this study is to investigate the advantages of a totally laparoscopic technique comparing open versus laparoscopic/robotic approach. Three hundred and eighty-eight patients with transverse colon cancer, treated with a segmental colon resection, were retrospectively analyzed. Demographic data, tumor stage, operative time, intraoperative complications, number of harvested lymph nodes and recovery outcomes were recorded. Recurrences and death were also evaluated during the follow-up. No differences were found between conventional and minimally invasive surgery, both for oncological long-term outcomes (recurrence rate p = 0.28; mortality p = 0.62) and postoperative complications (overall rate p = 0.43; anemia p = 0.78; nausea p = 0.68; infections p = 0.91; bleeding p = 0.62; anastomotic leak p = 0.55; ileus p = 0.75). Nevertheless, recovery outcomes showed statistically significant differences in favor of minimally invasive surgery in terms of time to first flatus (p = 0.001), tolerance to solid diet (p = 0.017), time to first mobilization (p = 0.001) and hospital stay (p = 0.004). Compared with laparoscopic approach, robotic surgery showed significantly better results for time to first flatus (p = 0.001), to first mobilization (p = 0.005) and tolerance to solid diet (p = 0.001). Finally, anastomosis evaluation confirmed the superiority of intracorporeal approach which showed significantly better results for time to first flatus (p = 0.001), to first mobilization (p = 0.003) and tolerance to solid diet (p = 0.001); moreover, we recorded a statistical difference in favor of intracorporeal approach for infection rate (p = 0.04), bleeding (p = 0.001) and anastomotic leak (p = 0.03). Minimally invasive approach is safe and effective as the conventional open surgery, with comparable oncological results but not negligible advantages in terms of recovery outcomes. Moreover, we demonstrated that robotic approach may be considered a valid option and an intracorporeal anastomosis should always be preferred.noneMilone, Marco; Degiuli, Maurizio; Velotti, Nunzio; Manigrasso, Michele; Vertaldi, Sara; D'Ugo, Domenico; De Palma, Giovanni Domenico; Dario Bruzzese, Giuseppe Servillo, Giuseppe De Simone, Katia Di Lauro, Silvia Sofia, Marco Ettore Allaix, Mario Morino, Rossella Reddavid, Carlo Alberto Ammirati, Stefano Scabini, Gabriele Anania, Cristina Bombardini, Andrea Barberis, Roberta Longhin, Andrea Belli, Francesco Bianco, Giampaolo Formisano, Giuseppe Giuliani, Paolo Pietro Bianchi, Davide Cavaliere, Leonardo Solaini, Claudio Coco, Gianluca Rizzo, Andrea Coratti, Raffaele De Luca, Michele Simone, Alberto Di Leo, Giovanni De Manzoni, Paola De Nardi, Ugo Elmore, Riccardo Rosati, Andrea Vignali, Paolo Delrio, Ugo Pace, Daniela Rega, Antonio Di Cataldo, Giovanni Li Destri, Annibale Donini, Luigina Graziosi, Andrea Fontana, Michela Mineccia, Sergio Gentilli, Manuela Monni, Mario Guerrieri, Monica Ortenzi, Francesca Pecchini, Micaela Piccoli, Italy. Corrado Pedrazzani, Giulia Turri, Sara Pollesel, Franco Roviello, Marco Rigamonti, Michele Zuolo, Mauro Santarelli, Federica Saraceno, Pierpaolo Sileri Giuseppe Sigismondo Sica, Luigi Siragusa Salvatore Pucciarelli, Matteo ZuinMilone, Marco; Degiuli, Maurizio; Velotti, Nunzio; Manigrasso, Michele; Vertaldi, Sara; D'Ugo, Domenico; De Palma, Giovanni Domenico; Dario Bruzzese, Giuseppe Servillo, Giuseppe De Simone, Katia Di Lauro, Silvia Sofia, Marco Ettore Allaix, Mario Morino, Rossella Reddavid, Carlo Alberto Ammirati, Stefano Scabini, Gabriele Anania, Cristina Bombardini, Andrea Barberis, Roberta Longhin, Andrea Belli, Francesco Bianco, Giampaolo Formisano, Giuseppe Giuliani, Paolo Pietro Bianchi, Davide Cavaliere, Leonardo Solaini, Claudio Coco, Gianluca Rizzo, Andrea Coratti, Raffaele De Luca, Michele Simone, Alberto Di Leo, Giovanni De Manzoni, Paola De Nardi, Ugo Elmore, Riccardo Rosati, Andrea Vignali, Paolo Delrio, Ugo Pace, Daniela Rega, Antonio Di Cataldo, Giovanni Li Destri, Annibale Donini, Luigina Graziosi, Andrea Fontana, Michela Mineccia, Sergio Gentilli, Manuela Monni, Mario Guerrieri, Monica Ortenzi, Francesca Pecchini, Micaela Piccoli, Italy. Corrado Pedrazzani, Giulia Turri, Sara Pollesel, Franco Roviello, Marco Rigamonti, Michele Zuolo, Mauro Santarelli, Federica Saraceno, Pierpaolo Sileri Giuseppe Sigismondo Sica, Luigi Siragusa Salvatore Pucciarelli, Matteo Zui