481 research outputs found
Fukalite: an example of OD structure with two-dimensional disorder
The real crystal structure of fukalite, Ca4Si2O 6(OH)2(CO3), was solved by means of the application of order-disorder (OD) theory and was refined through synchrotron radiation diffraction data from a single crystal. The examined sample came from the Gumeshevsk skarn copper porphyry deposit in the Central Urals, Russia. The selected crystal displays diffraction patterns characterized by strong reflections, which pointed to an orthorhombic sub-structure (the "family structure" in the OD terminology), and additional weaker reflections that correspond to a monoclinic real structure. The refined cell parameters are a = 7.573(3), b = 23.364(5), c = 11.544(4) Ă
, ÎČ = 109.15(1)°, space group P21/c. This unit cell corresponds to one of the six possible maximum degree of order (MDO) polytypes, as obtained by applying the OD procedure. The derivation of the six MDO polytypes is presented in the Appendix1. The intensity data were collected at the Elettra synchrotron facility (Trieste, Italy); the structure refinement converged to R = 0.0342 for 1848 reflections with I > 2Ï(I) and 0.0352 for all 1958 data. The structure of fukalite may be described as formed by distinct structural modules: a calcium polyhedral framework, formed by tobermorite-type polyhedral layers alternating along b with tilleyitetype zigzag polyhedral layers; silicate chains with repeat every fifth tetrahedron, running along a and linked to the calcium polyhedral layers on opposite sides; and finally rows of CO3 groups parallel to (100) and stacked along a
The impact of the strategy of laser treatment on structure formation of steel in a state of pre-transformation
The impact of the strategy of laser treatment on structure formation of steel in a state of pre-transformation
The yields of light meson resonances in neutrinonuclear interactions at <E_nu> = 10 GeV
The total yields of the all well-established light mesonic resonances (up to
the (1020) meson) are estimated in neutrinonuclear interactions at < E_nu
> = 10 GeV, using the data obtained with SKAT bubble chamber. For some
resonances, the yields in the forward and backward hemispheres in the hadronic
c.m.s. are also extracted. From the comparison of the obtained and available
higher-energy data, an indication is obtained that the resonance yields rise
almost linearly as a function of the mean mass of the neutrinoproduced
hadronic system. The fractions of pions originating from the light resonance
decays are inferred.Comment: 15 pages, 7 figure
Towards a revisitation of vesuvianite-group nomenclature: The crystal structure of Ti-rich vesuvianite from Alchuri, Shigar Valley, Pakistan
© 2016 International Union of Crystallography.Vesuvianite containing 5.85 wt% TiO2 from an Alpine-cleft-type assemblage outcropped near Alchuri, Shigar Valley, Northern Areas, Pakistan, has been investigated by means of electron microprobe analyses, gas-chromatographic analysis of H2O, X-ray powder diffraction, single-crystal X-ray structure refinement, 27Al NMR, 57Fe Mössbauer spectroscopy, IR spectroscopy and optical measurements. Tetragonal unit-cell parameters are: a = 15.5326 (2), c = 11.8040 (2) Ă
, space group P4/nnc. The structure was refined to final R1 = 0.031, wR2 = 0.057 for 11247 I > 2Ï(I). A general crystal-chemical formula of studied sample can be written as follows (Z = 2): [8-9](Ca17.1Na0.9) [8]Ca1.0[5](Fe2+ 0.44Fe3+ 0.34Mg0.22) [6](Al3.59Mg0.41) [6](Al4.03Ti2.20Fe3+1.37Fe2+ 0.40) (Si18O68) [(OH)5.84O2.83F1.33]. The octahedral site Y2 is Al-dominant and does not contain transition elements. Another octahedral site Y3 is also Al-dominant and contains Fe2+, Fe3+ and Ti. The site Y1 is split into Y1a and Y1b predominantly occupied by Fe2+ and Fe3+, respectively. The role of the Y1 site in the diversity of vesuvianite-group minerals is discussed
The detection of neutrino interactions in the emulsion/lead target of the OPERA experiment
The OPERA neutrino detector in the underground Gran Sasso Laboratory (LNGS)
was designed to perform the first detection of neutrino oscillations in
appearance mode through the study of oscillations. The
apparatus consists of an emulsion/lead target complemented by electronic
detectors and it is placed in the high energy long-baseline CERN to LNGS beam
(CNGS) 730 km away from the neutrino source. Runs with CNGS neutrinos were
successfully carried out in 2007 and 2008 with the detector fully operational
with its related facilities for the emulsion handling and analysis. After a
brief description of the beam and of the experimental setup we report on the
collection, reconstruction and analysis procedures of first samples of neutrino
interaction events
Emulsion sheet doublets as interface trackers for the OPERA experiment
New methods for efficient and unambiguous interconnection between electronic
counters and target units based on nuclear photographic emulsion films have
been developed. The application to the OPERA experiment, that aims at detecting
oscillations between mu neutrino and tau neutrino in the CNGS neutrino beam, is
reported in this paper. In order to reduce background due to latent tracks
collected before installation in the detector, on-site large-scale treatments
of the emulsions ("refreshing") have been applied. Changeable Sheet (CSd)
packages, each made of a doublet of emulsion films, have been designed,
assembled and coupled to the OPERA target units ("ECC bricks"). A device has
been built to print X-ray spots for accurate interconnection both within the
CSd and between the CSd and the related ECC brick. Sample emulsion films have
been extensively scanned with state-of-the-art automated optical microscopes.
Efficient track-matching and powerful background rejection have been achieved
in tests with electronically tagged penetrating muons. Further improvement of
in-doublet film alignment was obtained by matching the pattern of low-energy
electron tracks. The commissioning of the overall OPERA alignment procedure is
in progress.Comment: 19 pages, 19 figure
First events from the CNGS neutrino beam detected in the OPERA experiment
The OPERA neutrino detector at the underground Gran Sasso Laboratory (LNGS)
was designed to perform the first detection of neutrino oscillations in
appearance mode, through the study of nu_mu to nu_tau oscillations. The
apparatus consists of a lead/emulsion-film target complemented by electronic
detectors. It is placed in the high-energy, long-baseline CERN to LNGS beam
(CNGS) 730 km away from the neutrino source. In August 2006 a first run with
CNGS neutrinos was successfully conducted. A first sample of neutrino events
was collected, statistically consistent with the integrated beam intensity.
After a brief description of the beam and of the various sub-detectors, we
report on the achievement of this milestone, presenting the first data and some
analysis results.Comment: Submitted to the New Journal of Physic
Measurement of the atmospheric muon charge ratio with the OPERA detector
The OPERA detector at the Gran Sasso underground laboratory (LNGS) was used
to measure the atmospheric muon charge ratio in the TeV energy region. We
analyzed 403069 atmospheric muons corresponding to 113.4 days of livetime
during the 2008 CNGS run. We computed separately the muon charge ratio for
single and for multiple muon events in order to select different energy regions
of the primary cosmic ray spectrum and to test the charge ratio dependence on
the primary composition. The measured charge ratio values were corrected taking
into account the charge-misidentification errors. Data have also been grouped
in five bins of the "vertical surface energy". A fit to a simplified model of
muon production in the atmosphere allowed the determination of the pion and
kaon charge ratios weighted by the cosmic ray energy spectrum.Comment: 14 pages, 10 figure
- âŠ