624 research outputs found
EU-DEMO divertor: Cassette design and PFCs integration at pre-conceptual stage
The pre-conceptual design of the DEMO divertor cassette with a novelty, alternative path of the main cooling pipes inside cassette body is presented in this paper, focusing on cassette design and Plasma Facing Components (PFC) integration. The divertor cassette design is reviewed, considering recent updates in the DEMO configuration model as presented by the Programme Management Unit (PMU) in 2018. The new configuration requires the cooling pipes to be integrated inside the cassette body. The components affected by these changes and the impact on the divertor design are analyzed. The study focuses on a new integration system between cassette and cooling pipes. The paper describes the integration on the new cassette geometry and the divertor sub-systems. The design activities related to this system are discussed in detail in terms of CAD modeling and considerations with respect to manufacturing such as welding technologies and non-destructive testing
Assessment of New Ex-Vessel Magnetic Measurements in JET
ABSTRACT. A new ex vessel magnetic diagnostics was installed in JET during 2005 shut down, with the objective of: i) provide experimental data for a better modelling of the iron in the axisymmetric codes for plasma equilibrium reconstruction; ii) test the reliability of direct field measurements from Hall probes. The latter are of great interest for future ITER-like devices, where long lasting flat top phases are expected, in a high neutron yield and a high temperature environment. The experimental data achieved during the restart phase were analysed with the aid of simulation codes. Each individual signal was assessed for inclusion in the general JET Diagnostics system. The system is ready for use in the 2006 experimental campaigns
Eurofusion-DEMO Divertor - Cassette Design and Integration
The Eurofusion-DEMO design will complete the Pre Conceptual Design phase (PCD) with a PCD Gate, named G1, scheduled to take place in Q4 2020 that will focus on assessing the feasibility of the plant and its main components prior to entering into the Conceptual Design phase. In the paper first an overview is given of the Eurofusion-DEMO Divertor Assembly including design and interface description, systems and functional requirements, load specification, system classification, manufacturing procedures and cost estimate. Then critical issues are discussed and potential design solutions are proposed, e.g.: - Neutron material damage limits of the different (structural) materials present in the divertor assembly (as CuCrZr, Eurofer) and in the vacuum vessel (AISI 316 L(N)-IG); - Temperature hot spots in parts of the divertor assembly exposed to high nuclear heating and high heat radiation (from the plasma core or the separatrix) causing difficulties for active or passive cooling (e.g. cassette body structure, liner support structures, mechanical supports, divertor toroidal rails); - Arrangement and design of plasma-facing components and liner with pumping slot in the divertor cassette to enable pumping of exhaust gases from the lower port
Divertor of the European DEMO: Engineering and technologies for power exhaust
In a power plant scale fusion reactor, a huge amount of thermal power produced by the fusion reaction and external heating must be exhausted through the narrow area of the divertor targets. The targets must withstand the intense bombardment of the diverted particles where high heat fluxes are generated and erosion takes place on the surface. A considerable amount of volumetric nuclear heating power must also be exhausted. To cope with such an unprecedented power exhaust challenge, a highly efficient cooling capacity is required. Furthermore, the divertor must fulfill other critical functions such as nuclear shielding and channeling (and compression) of exhaust gas for pumping. Assuring the structural integrity of the neutron-irradiated (thus embrittled) components is a crucial prerequisite for a reliable operation over the lifetime. Safety, maintainability, availability, waste and costs are another points of consideration.
In late 2020, the Pre-Conceptual Design activities to develop the divertor of the European demonstration fusion reactor were officially concluded. On this occasion, the baseline design and the key technology options were identified and verified by the project team (EUROfusion Work Package Divertor) based on seven years of R&D efforts and endorsed by Gate Review Panel.
In this paper, an overview of the load specifications, brief descriptions of the design and the highlights of the technology R&D work are presented together with the further work still needed
First Plasma Operation of the Enhanced JET Vertical Stabilisation System First Plasma Operation of the Enhanced JET Vertical Stabilisation System
AbstrAct A project dedicated to the enhancement of the JET Vertical Stabilization system was launched in 2006, including an upgrade of the Power Supply of the Radial Field Amplifier, of hardware and software of the VS control system. The main aim was to double the JET capability in stabilising high current plasmas when subject to perturbations, in particular large Edge Localised Modes. We present here the results of first plasma operation with the new Enhanced Radial Field Amplifier and its data acquisition and control system, focussing on the benefits of an approach based on phased commissioning, modelling and offline algorithm validation
DTT - Divertor Tokamak Test facility: A testbed for DEMO
The effective treatment of the heat and power exhaust is a critical issue in the road map to the realization of the fusion energy. In order to provide possible, reliable, well assessed and on-time answers to DEMO, the Divertor Tokamak Test facility (DTT) has been conceived and projected to be carried out and operated within the European strategy in fusion technology. This paper, based on the invited plenary talk at the 31st virtual SOFT Conference 2020, provides an overview of the DTT scientific proposal, which is deeply illustrated in the 2019 DTT Interim Design Report
The Role of Governance in Mobile Phones for Inclusive Human Development in Sub-Saharan Africa
- …