Electron-beam-induced current at absorber back surfaces of Cu (In,Ga) Se2 thin-film solar cells

The following article appeared in Journal of Applied Physics 115.1 (2014): 014504 and may be found at http://scitation.aip.org/content/aip/journal/jap/115/1/10.1063/1.4858393The present work reports on investigations of the influence of the microstructure on electronic properties of Cu(In,Ga)Se2 (CIGSe) thin-film solar cells. For this purpose, ZnO/CdS/CIGSe stacks of these solar cells were lifted off the Mo-coated glass substrates. The exposed CIGSe backsides of these stacks were investigated by means of electron-beam-induced current (EBIC) and cathodoluminescence (CL) measurements as well as by electron backscattered diffraction (EBSD). EBIC and CL profiles across grain boundaries (GBs), which were identified by EBSD, do not show any significant changes at Σ3 GBs. Across non-Σ3 GBs, on the other hand, the CL signals exhibit local minima with varying peak values, while by means of EBIC, decreased and also increased short-circuit current values are measured. Overall, EBIC and CL signals change across non-Σ3 GBs always differently. This complex situation was found in various CIGSe thin films with different [Ga]/([In]+[Ga]) and [Cu]/([In]+[Ga]) ratios. A part of the EBIC profiles exhibiting reduced signals across non-Σ3 GBs can be approximated by a simple model based on diffusion of generated charge carriers to the GBs.This work was supported in part by the BMU projects comCIGS and comCIGSII. R.C. acknowledges financial support from Spanish MINECO within the program Ramon y Cajal (RYC-2011-08521)

Unveiling microscopic carrier loss mechanisms in 12 efficient Cu2ZnSnSe4 solar cells

Understanding carrier loss mechanisms at microscopic regions is imperative for the development of high performance polycrystalline inorganic thin film solar cells. Despite the progress achieved for kesterite, a promising environmentally benign and earth abundant thin film photovoltaic material, the microscopic carrier loss mechanisms and their impact on device performance remain largely unknown. Herein, we unveil these mechanisms in state of the art Cu2ZnSnSe4 CZTSe solar cells using a framework that integrates multiple microscopic and macroscopic characterizations with three dimensional device simulations. The results indicate the CZTSe films have a relatively long intragrain electron lifetime of 10 30 amp; 8201;ns and small recombination losses through bandgap and or electrostatic potential fluctuations. We identify that the effective minority carrier lifetime of CZTSe is dominated by a large grain boundary recombination velocity 104 amp; 8201;cm amp; 8201;s amp; 8722;1 , which is the major limiting factor of present device performance. These findings and the framework can greatly advance the research of kesterite and other emerging photovoltaic material

Slot Die Coated Triple Halide Perovskites for Efficient and Scalable Perovskite Silicon Tandem Solar Cells

Wide bandgap halide perovskite materials show promising potential to pair with silicon bottom cells. To date, most efficient wide bandgap perovskites layers are fabricated by spin coating, which is difficult to scale up. Here, we report on slot die coating for an efficient, 1.68 eV wide bandgap triple halide 3halide perovskite absorber, Cs0.22FA0.78 Pb I0.85Br0.15 3 5 mol MAPbCl3. A suitable solvent system is designed specifically for the slot die coating technique. We demonstrate that our fabrication route is suitable for tandem solar cells without phase segregation. The slot die coated wet halide perovskite is dried by a nitrogen N2 knife with high reproducibility and avoiding antisolvents. We explore varying annealing conditions and identify parameters allowing crystallization of the perovskite film into large grains reducing charge collection losses and enabling higher current density. At 150 C, an optimized trade off between crystallization and the PbI2 aggregates on the film s top surface is found. Thus, we improve the cell stability and performance of both single junction cells and tandems. Combining the 3halide top cells with a 120 amp; 956;m thin saw damage etched commercial Czochralski industrial wafer, a 2 terminal monolithic tandem solar cell with a PCE of 25.2 on a 1 cm2 active area is demonstrated with fully scalable processe

An open-access database and analysis tool for perovskite solar cells based on the FAIR data principles

Large datasets are now ubiquitous as technology enables higher-throughput experiments, but rarely can a research field truly benefit from the research data generated due to inconsistent formatting, undocumented storage or improper dissemination. Here we extract all the meaningful device data from peer-reviewed papers on metal-halide perovskite solar cells published so far and make them available in a database. We collect data from over 42,400 photovoltaic devices with up to 100 parameters per device. We then develop open-source and accessible procedures to analyse the data, providing examples of insights that can be gleaned from the analysis of a large dataset. The database, graphics and analysis tools are made available to the community and will continue to evolve as an open-source initiative. This approach of extensively capturing the progress of an entire field, including sorting, interactive exploration and graphical representation of the data, will be applicable to many fields in materials science, engineering and biosciences

An open-access database and analysis tool for perovskite solar cells based on the FAIR data principles

Large datasets are now ubiquitous as technology enables higher-throughput experiments, but rarely can a research field truly benefit from the research data generated due to inconsistent formatting, undocumented storage or improper dissemination. Here we extract all the meaningful device data from peer-reviewed papers on metal-halide perovskite solar cells published so far and make them available in a database. We collect data from over 42, 400 photovoltaic devices with up to 100 parameters per device. We then develop open-source and accessible procedures to analyse the data, providing examples of insights that can be gleaned from the analysis of a large dataset. The database, graphics and analysis tools are made available to the community and will continue to evolve as an open-source initiative. This approach of extensively capturing the progress of an entire field, including sorting, interactive exploration and graphical representation of the data, will be applicable to many fields in materials science, engineering and biosciences. © 2021, The Author(s)