Transient permeabilization of living cells: combining shear flow and acoustofluidic trapping for the facilitated uptake of molecules

Here, we present a novel approach for the transient permeabilization of cells. We combined laminar shear flow in a microchannel with chaotic advection employing surface acoustic waves. First, as a fundamental result on the one hand, and as a kind of reference measurement for the more complex acoustofluidic approach on the other hand, we studied the permeabilization of cells in pure shear flow in a microchannel with Y-geometry. As a proof of principle, we used fluorescent dyes as model drugs and investigated their internalization into HeLa cells. We found that drug uptake scaled non-linearly with flow rate and thus shear stress. For calcein, we obtained a maximal enhancement factor of about 12 at an optimum flow rate of Q = 500 µL/h in the geometry used here compared to static incubation. This result is discussed in the light of structural phase transitions of lipid membranes accompanied by non-linear effects, as the plasma membrane is the main barrier to overcome. Second, we demonstrated the enhanced permeabilization of acoustically trapped cells in surface acoustic wave induced vortices in a microchannel, with an enhancement factor of about 18 compared to quasi-static incubation. Moreover, we optimized the trapping conditions regarding flow rate, the power level of the surface acoustic wave, and trapping time. Finally, we showed that our method is not limited to small molecules but can also be applied to compounds with higher molecular weight

Controllable Acoustic Mixing of Fluids in Microchannels for the Fabrication of Therapeutic Nanoparticles

Fifteen years ago, surface acoustic waves (SAW) were found to be able to drive fluids and numerous applications in microfluidics have been developed since. Here, we review the progress made and report on new approaches in setting-up microfluidic, continuous flow acoustic mixing. In a microchannel, chaotic advection is achieved by generation of a SAW driven fluid jet perpendicular to the mean flow direction. Using a high speed video camera and particle image velocimetry, we measure the flow velocities and show that mixing is achieved in a particularly controllable and fast way. The mixing quality is determined as a function of system parameters: SAW power, volume flux and fluid viscosity. Exploring the parameter space of mixing provides a practical guide for acoustic mixing in microchannels and allows for adopting conditions to different solvents, as e.g., required for the generation of nanoscale particles from alcoholic phases. We exemplarily demonstrate the potential of SAW based continuous flow mixing for the production of therapeutic nucleic acid nanoparticles assembled from polymer and lipid solutions

Nanosized Multifunctional Polyplexes for Receptor-Mediated SiRNA Delivery

Although our understanding of RNAi and our knowledge on designing and synthesizing active and safe siRNAs significantly increased during the past decade, targeted delivery remains the major limitation in the development of siRNA therapeutics. On one hand, practical considerations dictate robust chemistry reproducibly providing precise carrier molecules. On the other hand, the multistep delivery process requires dynamic multifunctional carriers of substantial complexity. We present a monodisperse and multifunctional carrier system, synthesized by solid phase supported chemistry, for siRNA delivery in vitro and in vivo. The sequence-defined assembly includes a precise cationic (oligoethanamino)amide core, terminated at the ends by two cysteines for bioreversible polyplex stabilization, at a defined central position attached to a monodisperse polyethylene glycol chain coupled to a terminal folic acid as cell targeting ligand. Complexation with an endosomolytic influenza peptide-siRNA conjugate results in nanosized functional polyplexes of 6 nm hydrodynamic diameter. The necessity of each functional substructure of the carrier system for a specific and efficient gene silencing was confirmed. The nanosized polyplexes showed stability in vivo, receptor-specific cell targeting, and silencing of the EG5 gene in receptor-positive tumors. The nanosized appearance of these particles can be precisely controlled by the oligomer design (from 5.8 to 8.8 nm diameter). A complete surface charge shielding together with the high stability result in good tolerability in vivo and the absence of accumulation in nontargeted tissues such as liver, lung, or spleen. Due to their small size, siRNA polyplexes are efficiently cleared by the kidney

Influence of Defined Hydrophilic Blocks within Oligoaminoamide Copolymers: Compaction versus Shielding of pDNA Nanoparticles

Cationic polymers are promising components of the versatile platform of non-viral nucleic acid (NA) delivery agents. For a successful gene delivery system, these NA vehicles need to comprise several functionalities. This work focuses on the modification of oligoaminoamide carriers with hydrophilic oligomer blocks mediating nanoparticle shielding potential, which is necessary to prevent aggregation or dissociation of NA polyplexes in vitro, and hinder opsonization with blood components in vivo. Herein, the shielding agent polyethylene glycol (PEG) in three defined lengths (12, 24, or 48 oxyethylene repeats) is compared with two peptidic shielding blocks composed of four or eight repeats of sequential proline-alanine-serine (PAS). With both types of shielding agents, we found opposing effects of the length of hydrophilic segments on shielding and compaction of formed plasmid DNA (pDNA) nanoparticles. Two-arm oligoaminoamides with 37 cationizable nitrogens linked to 12 oxyethylene units or four PAS repeats resulted in very compact 40-50 nm pDNA nanoparticles, whereas longer shielding molecules destabilize the investigated polyplexes. Thus, the balance between sufficiently shielded but still compact and stable particles can be considered a critical optimization parameter for non-viral nucleic acid vehicles based on hydrophilic-cationic block oligomers

Supramolecular Assembly of Aminoethylene‐Lipopeptide PMO Conjugates into RNA Splice‐Switching Nanomicelles

Phosphorodiamidate morpholino oligomers (PMOs) are oligonucleotide analogs that can be used for therapeutic modulation of pre‐mRNA splicing. Similar to other classes of nucleic acid‐based therapeutics, PMOs require delivery systems for efficient transport to the intracellular target sites. Here, artificial peptides based on the oligo(ethylenamino) acid succinyl‐tetraethylenpentamine (Stp), hydrophobic modifications, and an azide group are presented, which are used for strain‐promoted azide‐alkyne cycloaddition conjugation with splice‐switching PMOs. By systematically varying the lead structure and formulation, it is determined that the type of contained fatty acid and supramolecular assembly have a critical impact on the delivery efficacy. A compound containing linolenic acid with three cis double bonds exhibits the highest splice‐switching activity and significantly increases functional protein expression in pLuc/705 reporter cells in vitro and after local administration in vivo. Structural and mechanistic studies reveal that the lipopeptide PMO conjugates form nanoparticles, which accelerate cellular uptake and that the content of unsaturated fatty acids enhances endosomal escape. In an in vitro Duchenne muscular dystrophy exon skipping model using H2K‐mdx52 dystrophic skeletal myotubes, the highly potent PMO conjugates mediate significant splice‐switching at very low nanomolar concentrations. The presented aminoethylene‐lipopeptides are thus a promising platform for the generation of PMO‐therapeutics with a favorable activity/toxicity profile

Solid-phase-assisted synthesis of targeting peptide-PEG-oligo(ethane amino)amides for receptor-mediated gene delivery.

In the forthcoming era of cancer gene therapy, efforts will be devoted to the development of new efficient and non-toxic gene delivery vectors. In this regard, the use of Fmoc/Boc-protected oligo(ethane amino)acids as building blocks for solid-phase-supported assembly represents a novel promising approach towards fully controlled syntheses of effective gene vectors. Here we report on the synthesis of defined polymers containing the following: (i) a plasmid DNA (pDNA) binding domain of eight succinoyl-tetraethylenpentamine (Stp) units and two terminal cysteine residues; (ii) a central polyethylene glycol (PEG) chain (with twenty-four oxyethylene units) for shielding; and (iii) specific peptides for targeting towards cancer cells. Peptides B6 and c(RGDfK), which bind transferrin receptor and αvβ3 integrin, respectively, were chosen because of the high expression of these receptors in many tumoral cells. This study shows the feasibility of designing these kinds of fully controlled vectors and their success for targeted pDNA-based gene transfer

Tuning the Morphological Appearance of Iron(III) Fumarate: Impact on Material Characteristics and Biocompatibility

Iron(III) fumarate materials are well suited for biomedical applications as they feature biocompatible building blocks, porosity, chemical functionalizability, and magnetic resonance imaging (MRI) activity. The synthesis of these materials however is difficult to control, and it has been challenging to produce monodisperse particle sizes and morphologies that are required in medical use. Here, we report the optimization of iron(III) fumarate nano- and microparticle synthesis by surfactant-free methods, including room temperature, solvothermal, microwave, and microfluidic conditions. Four variants of iron(III) fumarate with distinct morphologies were isolated and are characterized in detail. Structural characterization shows that all iron(III) fumarate variants exhibit the metal–organic framework (MOF) structure of MIL-88A. Nanoparticles with a diameter of 50 nm were produced, which contain crystalline areas not exceeding 5 nm. Solvent-dependent swelling of the crystalline particles was monitored using in situ X-ray diffraction. Cytotoxicity experiments showed that all iron(III) fumarate variants feature adequate biotolerability and no distinct interference with cellular metabolism at low concentrations. Magnetic resonance relaxivity studies using clinical MRI equipment, on the other hand, proved that the MRI contrast characteristics depend on particle size and morphology. All in all, this study demonstrates the possibility of tuning the morphological appearance of iron(III) fumarate particles and illustrates the importance of optimizing synthesis conditions for the development of new biomedical materials