High Performance Antenna System in MIMO Configuration for 5G Wireless Communications Over Sub-6 GHz Spectrum

This paper presents a high-performance multiple input and multiple output (MIMO) antenna comprising 2 x 2 configuration of radiating elements that is designed for sub-6 GHz applications. The proposed MIMO antenna employs four identical radiating elements. High isolation between the radiating elements and therefore reduced mutual coupling is achieved by spatially arranging the radiating elements in an orthogonal configuration. Also, a novel frequency selective surface (FSS) was employed to increase the gain of the MIMO antenna over a wide bandwidth from 3 to 6 GHz. This was achieved by locating the FSS above the antenna at a certain height. The FSS essentially enhanced the antenna's directivity, reduced back lobe radiation and mutual coupling. The antenna was fabricated on a standard Rogers RT Duroid 5880 dielectric substrate with a 0.8 mm thickness. The overall dimension of the MIMO antenna is 50 x 50 x 12.5 mm(3) and it operates from 3.8 to 6 GHz, which corresponds to a fractional bandwidth of 41%. The proposed MIMO antenna has a measured peak gain of 4.8 dBi and inter radiation element isolation >20 dB. Its envelope correlation coefficient is <0.1 and diversity gain >9.9 (dB). These characteristics make the proposed MIMO antenna system suitable for 5G communication systems

Machine Learning based Energy Management Model for Smart Grid and Renewable Energy Districts

The combination of renewable energy sources and prosumer-based smart grid is a sustainable solution to cater to the problem of energy demand management. A pressing need is to develop an efficient Energy Management Model (EMM) that integrates renewable energy sources with smart grids. However, the variable scenarios and constraints make this a complex problem. Machine Learning (ML) methods can often model complex and non-linear data better than the statistical models. Therefore, developing an ML algorithm for the EMM is a suitable option as it reduces the complexity of the EMM by developing a single trained model to predict the performance parameters of EMM for multiple scenarios. However, understanding latent correlations and developing trust in highly complex ML models for designing EMM within the stochastic prosumer-based smart grid is still a challenging task. Therefore, this paper integrates ML and Gaussian Process Regression (GPR) in the EMM. At the first stage, an optimization model for Prosumer Energy Surplus (PES), Prosumer Energy Cost (PEC), and Grid Revenue (GR) is formulated to calculate base performance parameters (PES, PEC, and GR) for the training of the ML-based GPR model. In the second stage, stochasticity of renewable energy sources, load, and energy price, same as provided by the Genetic Algorithm (GA) based optimization model for PES, PEC, and GR, and base performance parameters act as input covariates to produce a GPR model that predicts PES, PEC, and GR. Seasonal variations of PES, PEC, and GR are incorporated to remove hitches from seasonal dynamics of prosumers energy generation and prosumers energy consumption. The proposed adaptive Service Level Agreement (SLA) between energy prosumers and the grid benefits both these entities. The results of the proposed model are rigorously compared with conventional optimization (GA and PSO) based EMM to prove the validity of the proposed model

Prospective study of immunological factors in non-inflammatory bowel disease enterocutaneous fistulas

© 2011 The Authors. Published by BMC, part of Springer Nature. This is an open access article available under a Creative Commons licence. The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.1186/1471-2482-11-12Background: Enterocutaneous fistulas (ECF) are debilitating and usually result following complex abdominal surgery. While there is an association with inflammatory bowel disease (IBD), a large number of fistulas occur after surgery not related to IBD. The consequences of ECF include short bowel syndrome and the need for long term parenteral nutrition. ECF can heal spontaneously and in the case of IBD can be cured by medical therapy in some instances. Those that do not resolve spontaneously have to be cured by surgery which is complex and associated with a high morbidity. It is not considered traditional treatment to use the same medical therapy as in IBD to cure ECF caused by other conditions. A small case series has reported three patients with persistent ECF not related to IBD to have healed following use of Infliximab which is the treatment commonly used for ECF caused by IBD. Infliximab acts by inhibiting the activity of the inflammatory cytokine TNF- alpha. It is not known if this cytokine is present in ECF tissue in the absence of IBD. The aim of this study is to demonstrate the presence of inflammatory markers in tissue surrounding non-IBD ECF and in particular to quantify the presence of the cytokine TNF- alpha. We hypothesise that TNF - alpha levels are raised in non-IBD ECF. Methods/Design. Tissue and serum from ECF of IBD and non-IBD patients will be prospectively collected at St. Mark's Hospital Intestinal Failure Unit. The control group will consist of patients undergoing colonoscopy for bowel cancer screening, with normal findings. Biopsies of the terminal ileum will be obtained from this group during colonoscopy. The fistula tract and serum cytokine profiles of interleukins (IL)-1a, IL-1b, IL-2, IL-4, IL-6, IL-8, IL-10, TNF- alpha, IFN-y, MCP-1, EGF and VEGF will be assessed. Discussion. This study aims to assess the presence or absence of TNF- alpha expression in the ECF tissue in non-IBD origin. If our hypothesis is correct we would then be able to study the use of the TNF- alpha inhibitor Infliximab as a therapeutic option in the treatment of non-IBD ECF. Secondary aims include assessing the spectrum of inflammatory cytokines and markers present in tissue and serum of non-IBD ECF when compared with IBD ECF and normal controls. © 2011 Rahbour et al; licensee BioMed Central Ltd.The study has secured funding from Bowel Disease Research Foundation (BDRF).Published versio

Assessing Local People’s Preferences for Landscape Character in Teknaf Peninsula for Sustainable Landscape Conservation and Development

Sustainable development requires better understanding of the human-landscape relationship in forested landscapes, one that facilitates more locally relevant and sustainable management. It can be more easily understood by the process of landscape characterisation and humans’ valuation. Therefore, this study assesses local people’s preferences and perceptions about the physical landscape, which is crucial for managing landscape and livelihood. The study investigates the diversification of landscape character types and landscape character areas (LCA), local people’s perceptions about and preferences for different LCAs, and how and why they prefer some LCAs to others. An LCA is a distinct type of landscape that is relatively homogenous in character. Two different villages located in Teknaf peninsula, Bangladesh, are examined where the villages were selected by calculating vegetation cover within a buffer of 1 kilometre. Landform and vegetation data were collected as physical characteristics of the landscape to identify the LCA, and data for local people’s perception and preferences were collected through focus group discussions and questionnaire surveys by selecting 10% of the households of each village in March 2016. The findings show that in Kerantali the diversification of landscape character types was more than in Tulatali. Homestead garden areas are highly preferred in Tulatali and forest is highly preferred in Kerantali. Kerantali\u27s people receive poor material benefit from forest areas, whereas Tulatoli\u27s people receive more material benefit from homestead garden areas. Furthermore, our findings indicate that homestead gardens play an important role as a supplement to forests

Current trends in the surgical management of Dupuytren’s disease in Europe: an analysis of patient charts

Introduction: Dupuytren's disease (DD) causes progressive digital flexion contracture and is more common in men of European descent. Methods: Orthopaedic and plastic surgeons in 12 European countries (the Czech Republic, Denmark, Finland, France, Germany, Hungary, Italy, The Netherlands, Poland, Spain, Sweden and the UK) with >3 and <30 years experience reviewed the medical charts of five consecutive patients they had treated surgically for DD in 2008. Descriptive statistics are reported. Results: In total, 3,357 patient charts were reviewed. Mean (standard deviation) patient age was 61.9 (10.2) years; 81% were men. At the time of the procedure, 11% of patients were at Tubiana stage Ia (0-20° total flexion); 30%, stage Ib (21-45°); 34%, stage II (46-90°); 17%, stage III (91-135°); and 5%, stage IV (&135°). Percutaneous needle fasciotomy was performed in 10%, fasciotomy in 13%, fasciectomy in 69% and dermofasciectomy (DF) in 6% of patients. After surgery, fingers improved a mean of 1.9 Tubiana stages, and 54% of patients had no nodules or contracture. The rate of reported complications during the procedure was 4% overall (11% in patients undergoing DF). The most common postoperative complications reported were haematoma (8%), wound healing complications (6%) and pain (6%). No postoperative complications were reported in 77% of patients. Conclusions: In this European study of more than 3,000 patients with DD, most patients were diagnosed at Tubiana stage I or II, the majority received fasciectomy and more than half had no nodules or contracture remaining after surgery

The GCR2 Gene Family Is Not Required for ABA Control of Seed Germination and Early Seedling Development in Arabidopsis

BACKGROUND: The plant hormone abscisic acid (ABA) regulates diverse processes of plant growth and development. It has recently been proposed that GCR2 functions as a G-protein-coupled receptor (GPCR) for ABA. However, the structural relationships and functionality of GCR2 have been challenged by several independent studies. A central question in this controversy is whether gcr2 mutants are insensitive to ABA, because gcr2 mutants were shown to display reduced sensitivity to ABA under one experimental condition (e.g. 22 degrees C, continuous white light with 150 micromol m(-2) s(-1)) but were shown to display wild-type sensitivity under another slightly different condition (e.g. 23 degrees C, 14/10 hr photoperiod with 120 micromol m(-2) s(-1)). It has been hypothesized that gcr2 appears only weakly insensitive to ABA because two other GCR2-like genes in Arabidopsis, GCL1 and GCL2, compensate for the loss of function of GCR2. PRINCIPAL FINDINGS: In order to test this hypothesis, we isolated a putative loss-of-function allele of GCL2, and then generated all possible combinations of mutations in each member of the GCR2 gene family. We found that all double mutants, including gcr2 gcl1, gcr2 gcl2, gcl1 gcl2, as well as the gcr2 gcl1 gcl2 triple mutant displayed wild-type sensitivity to ABA in seed germination and early seedling development assays, demonstrating that the GCR2 gene family is not required for ABA responses in these processes. CONCLUSION: These results provide compelling genetic evidence that GCR2 is unlikely to act as a receptor for ABA in the context of either seed germination or early seedling development

Facile Synthesis of Fe3O4−SiO2 Nanocomposites for Wastewater Treatment

This is the final version. Available on open access from Wiley via the DOI in this recordData Availability Statement: The data that support the findings of this study are available from the corresponding author upon reasonable request.Water constitutes ≈70–90% of the organism's body by mass and is highly important for its survival. Water contains a variety of chemical contaminants introduced by various sectors, resulting in contamination that has a direct impact on the ecosystem. Various approaches are in practice to tackle these issues. Among these, semiconductor photocatalysis appears to be the cutting-edge technology for the degradation of wastewater contaminants. Herein, the fabrication of Fe3O4−SiO2 nanocomposite via facile co-precipitation and Stober methods are reported. Various characterization techniques are employed for the structural elucidation, morphology, crystallinity, and stability of the as-prepared composite. The nanocomposite is employed in catalytic and photocatalytic applications toward the removal of methylene blue (MB) and methyl orange (MO) dyes from a comparative perspective. It is observed that the composite can remove about 93% of MB and 51% of MO within 7 and 6 h, respectively. These findings indicate that the nanocomposite has a higher MB removal effectiveness than the MO. This trend can be accredited to the difference in the chemical structure of both dyes. The nanocomposite is also evaluated for antioxidant and antileishmanial activity, and it is shown to be quite effective even at very low concentrations.Engineering and Physical Sciences Research Council (EPSRC

A Review of Supercapacitors: Materials Design, Modification, and Applications

This is the final version. Available on open access from MDPI via the DOI in this recordSupercapacitors (SCs) have received much interest due to their enhanced electrochemical performance, superior cycling life, excellent specific power, and fast charging–discharging rate. The energy density of SCs is comparable to batteries; however, their power density and cyclability are higher by several orders of magnitude relative to batteries, making them a flexible and compromis-ing energy storage alternative, provided a proper design and efficient materials are used. This review emphasizes various types of SCs, such as electrochemical double-layer capacitors, hybrid su-percapacitors, and pseudo-supercapacitors. Furthermore, various synthesis strategies, including sol-gel, electro-polymerization, hydrothermal, co-precipitation, chemical vapor deposition, direct coating, vacuum filtration, de-alloying, microwave auxiliary, in situ polymerization, electro-spin-ning, silar, carbonization, dipping, and drying methods, are discussed. Furthermore, various func-tionalizations of SC electrode materials are summarized. In addition to their potential applications, brief insights into the recent advances and associated problems are provided, along with conclu-sions. This review is a noteworthy addition because of its simplicity and conciseness with regard to SCs, which can be helpful for researchers who are not directly involved in electrochemical energy storage.Saudi Aramco Chair ProgrammeEngineering and Physical Sciences Research Council (EPSRC

Optimal functional outcome measures for assessing treatment for Dupuytren's disease: A systematic review and recommendations for future practice

This article is available through the Brunel Open Access Publishing Fund. Copyright © 2013 Ball et al.; licensee BioMed Central Ltd.Background: Dupuytren's disease of the hand is a common condition affecting the palmar fascia, resulting in progressive flexion deformities of the digits and hence limitation of hand function. The optimal treatment remains unclear as outcomes studies have used a variety of measures for assessment. Methods: A literature search was performed for all publications describing surgical treatment, percutaneous needle aponeurotomy or collagenase injection for primary or recurrent Dupuytren’s disease where outcomes had been monitored using functional measures. Results: Ninety-one studies met the inclusion criteria. Twenty-two studies reported outcomes using patient reported outcome measures (PROMs) ranging from validated questionnaires to self-reported measures for return to work and self-rated disability. The Disability of Arm, Shoulder and Hand (DASH) score was the most utilised patient-reported function measure (n=11). Patient satisfaction was reported by eighteen studies but no single method was used consistently. Range of movement was the most frequent physical measure and was reported in all 91 studies. However, the methods of measurement and reporting varied, with seventeen different techniques being used. Other physical measures included grip and pinch strength and sensibility, again with variations in measurement protocols. The mean follow-up time ranged from 2 weeks to 17 years. Conclusions: There is little consistency in the reporting of outcomes for interventions in patients with Dupuytren’s disease, making it impossible to compare the efficacy of different treatment modalities. Although there are limitations to the existing generic patient reported outcomes measures, a combination of these together with a disease-specific questionnaire, and physical measures of active and passive individual joint Range of movement (ROM), grip and sensibility using standardised protocols should be used for future outcomes studies. As Dupuytren’s disease tends to recur following treatment as well as extend to involve other areas of the hand, follow-up times should be standardised and designed to capture both short and long term outcomes