Stress degradation studies and development of stability-indicating TLC-densitometry method for determination of prednisolone acetate and chloramphenicol in their individual and combined pharmaceutical formulations

A rapid and reproducible stability indicating TLC method was developed for the determination of prednisolone acetate and chloramphenicol in presence of their degraded products. Uniform degradation conditions were maintained by refluxing sixteen reaction mixtures for two hours at 80°C using parallel synthesizer including acidic, alkaline and neutral hydrolysis, oxidation and wet heating degradation. Oxidation at room temperature, photochemical and dry heating degradation studies were also carried out. Separation was done on TLC glass plates, pre-coated with silica gel 60F-254 using chloroform: methanol (14:1 v/v). Spots at Rf 0.21 ± 0.02 and Rf 0.41 ± 0.03 were recognized as chloramphenicol and prednisolone acetate, respectively. Quantitative analysis was done through densitometric measurements at multiwavelength (243 nm, λmax of prednisolone acetate and 278 nm, λmax of chloramphenicol), simultaneously. The developed method was optimized and validated as per ICH guidelines. Method was found linear over the concentration range of 200-6000 ng/spot with the correlation coefficient (r2 ± S.D.) of 0.9976 ± 3.5 and 0.9920 ± 2.5 for prednisolone acetate and chloramphenicol, respectively. The developed TLC method can be applied for routine analysis of prednisolone acetate and chloramphenicol in presence of their degraded products in their individual and combined pharmaceutical formulations

Preparation and Characterization of Metformin Hydrochloride — Compritol 888 ATO Solid Dispersion

Metformin hydrochloride (MET) sustained-release solid dispersions (SD) were prepared by the solvent evaporation and closed melt method, using compritol 888 ATO as the polymer with five different drug-carrier ratios. Characterization of solid dispersion was carried out by Fourier Transform Infrared (FTIR) spectroscopy, ultraviolet (UV) spectroscopy, Differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD). The FTIR and UV studies suggested that no bond formation had occurred between the polymer and the drug. DSC and XPRD results ruled out any interaction or complex formation between the drug and the polymer. The formulated SD had acceptable physicochemical characters and SD with a 1 : 4 drug : Polymer ratio, which released the drug over an extended period of eight-to-ten hours. The data obtained from the in vitro release studies were fitted with various kinetic models and were found to follow the Korsmeyer-Peppas equation. The prepared SD showed good stability over the studied time period. The solvent evaporation method was found to be more helpful than the closed melt method, giving the sustained release action. The SD with a 1 : 4 ratio of drug to polymer, by the solvent evaporation method, was selected as the most effective candidate for the subsequent development of a well-timed, sustained-release dosage form of the drug

Stability Implications of Repackaging Paracetamol Tablets into Dose Administration Aids

Background: Despite the widespread use of dose administration aids (DAAs) there is little available data on the stability of drugs during repackaging or storage in these devices. Aim: To investigate the physicochemical stability of paracetamol tablets repackaged in DAAs. Method: Physicochemical stability studies were performed on a commonly used paracetamol tablet directly after heat-sealing in a DAA frequently employed in practice, then at ambient (25ꃻ 60% relative humidity) and accelerated (40 ꃻ 75% relative humidity) conditions, over a 3-month period. Physical characteristics of the tablets (weight uniformity, physical appearance, thickness, hardness, friability, disintegration, dissolution rates) were evaluated at time = 0, directly after heatsealing, 1 month and 3 months. Chemical stability was confirmed by high performance liquid chromatography (HPLC). The results were compared to control samples stored in the original packaging at the various environmental conditions studied. Results: All compendial requirements for physicochemical stability were met for both ambient and accelerated conditions over the 3-month period. Chemical stability of paracetamol content fell within the required range of 95-105% of the labelled amount, for all environmental conditions. Conclusion: This study provides evidence on the stability of paracetamol tablets in a DAA, to support pharmacists in making sound clinical and operational decisions regarding the repackaging of paracetamol in these devices.Griffith Health, School of PharmacyFull Tex

Pulmonary delivery systems for polyphenols

This review reports on the beneficial pharmacological properties of naturally occurring polyphenols for the treatment of inflammatory pulmonary diseases. In addition, it presents an overview of the different types of inhalable formulations which have been developed in order to achieve efficient delivery of polyphenols to the respiratory tract. The main biological activities of polyphenols (anti-oxidant and anti-inflammatory) are covered, with particular emphasis on the studies describing their therapeutic effects on different factors and conditions characteristic of lung pathologies. Special focus is on the technological aspects which influence the pulmonary delivery of drugs. The various polyphenol-based inhalable formulations reported in the literature are examined with specific attention to the preparation methodologies, aerosol performance, lung deposition and in vitro and in vivo polyphenol uptake by the pulmonary epithelial cells

Preservative Efficacy Tests in Formulated Nasal Products: Reproducibility and Factors Affecting Preservative Activity

Preservative efficacy tests were performed in triplicate on each of three batches of three formulated nasal spray preparations to assess the inter- and intra-batch variation in preservative performance which typically results from these procedures, and to assess the relative importance of factors influencing preservative performance in nasal products. Tests were conducted using procedures conforming, as far as possible, to both the European and the US pharmacopoeias and the results interpreted using the performance criteria of both. Despite the adoption of practices designed to maximize reproducibility, a marked variation in the degree of microbial inactivation was observed, both within and between batches of product. A preservative system comprising benzalkonium chloride and phenylethyl alcohol was found to be far superior to combinations of either benzalkonium chloride plus disodium edetate or potassium sorbate plus disodium edetate, both of which failed to satisfy the EP performance criteria on a number of occasions. Proposals are made for the adoption of inactivation criteria which incorporate realistic error limits reflecting the inherent problems of reproducibility of the viable counting procedures involved