3,796 research outputs found
Loyalty discounts
This paper considers the use of loyalty inducing discounts in vertical supply chains. An upstream manufacturer and a competitive fringe sell differentiated products to a retailer who has private information about the level of stochastic demand. We provide a comparison of market outcomes when the manufacturer uses two-part tariffs (2PT), all-unit quantity discounts (AU), and market share discounts (MS). We show that retailer's risk attitude affects manufacturer's preferences over these three pricing schemes. When the retailer is risk-neutral, it bears all the risk and all three schemes lead to the same outcome. When the retailer is risk-averse, 2PT performs the worst from manufacturer s perspective but it leads to the highest total surplus. For a wide range of parameter values (but not for all) the manufacturer prefers MS to AU. By limiting the retailer's product substitution possibilities MS makes the demand for manufacturer s product more inelastic. This reduces the amount (share of total profits) the manufacturer needs to leave to the retailer for the latter to participate in the scheme.This study is funded from the Valencian Economic Research Institute (IVIE) and the European Commission
Radiation-Hard Quartz Cerenkov Calorimeters
New generation hadron colliders are going to reach unprecedented energies and radiation levels. Quartz has been identified as a radiation-hard material that can be used for Cerenkov calorimeters of the future experiments. We report from the radiation hardness tests performed on quartz fibers, as well as the characteristics of the quartz fiber and plate Cerenkov calorimeters that have been built, designed, and proposed for the CMS experiment
Measurements of the Rate Capability of Various Resistive Plate Chambers
Resistive Plate Chambers (RPCs) exhibit a significant loss of efficiency for
the detection of particles, when subjected to high particle fluxes. This rate
limitation is related to the usually high resistivity of the resistive plates
used in their construction. This paper reports on measurements of the
performance of three different glass RPC designs featuring a different total
resistance of the resistive plates. The measurements were performed with 120
GeV protons at varying beam intensitie
Quartz Cherenkov Counters for Fast Timing: QUARTIC
We have developed particle detectors based on fused silica (quartz) Cherenkov
radiators read out with micro-channel plate photomultipliers (MCP-PMTs) or
silicon photomultipliers (SiPMs) for high precision timing (Sigma(t) about
10-15 ps). One application is to measure the times of small angle protons from
exclusive reactions, e.g. p + p - p + H + p, at the Large Hadron Collider, LHC.
They may also be used to measure directional particle fluxes close to external
or stored beams. The detectors have small areas (square cm), but need to be
active very close (a few mm) to the intense LHC beam, and so must be radiation
hard and nearly edgeless. We present results of tests of detectors with quartz
bars inclined at the Cherenkov angle, and with bars in the form of an "L" (with
a 90 degree corner). We also describe a possible design for a fast timing
hodoscope with elements of a few square mm.Comment: 24 pages, 14 figure
Quartz Plate Calorimeter as SLHC Upgrade to CMS Hadronic EndCap Calorimeters
Due to an expected increase in radiation damage under super-LHC conditions, we propose to substitute the scintillator tiles in the original design of the hadronic endcap (HE) calorimeter with quartz plates. Quartz is proved to be radiation hard by the radiation damage tests with electron, proton, neutron and gamma beams. Using wavelength shifting fibers, it is possible to collect efficiently the Cherenkov light generated in quartz plates. This paper summarizes the results from various test beams, bench tests, and Geant4 simulations done on methods of collecting light from quartz plates, as well as radiation hardness tests on quartz material
Design, performance, and calibration of the CMS hadron-outer calorimeter
The outer hadron calorimeter (HCAL HO) of the CMS detector is designed to measure the energy that is not contained by the barrel (HCAL HB) and electromagnetic (ECAL EB) calorimeters. Due to space limitation the barrel calorimeters do not contain completely the hadronic shower and an outer calorimeter (HO) was designed, constructed and inserted in the muon system of CMS to measure the energy leakage. Testing and calibration of the HO was carried out in a 300 GeV/c test beam that improved the linearity and resolution. HO will provide a net improvement in missing E T measurements at LHC energies. Information from HO will also be used for the muon trigger in CMS
Forward Neutron Production at the Fermilab Main Injector
We have measured cross sections for forward neutron production from a variety
of targets using proton beams from the Fermilab Main Injector. Measurements
were performed for proton beam momenta of 58 GeV/c, 84 GeV/c, and 120 GeV/c.
The cross section dependence on the atomic weight (A) of the targets was found
to vary as where is for a beam momentum of
58 GeV/c and 0.540.05 for 120 GeV/c. The cross sections show reasonable
agreement with FLUKA and DPMJET Monte Carlos. Comparisons have also been made
with the LAQGSM Monte Carlo.Comment: Accepted for publication in Physical Review D. This version
incorporates small changes suggested by referee and small corrections in the
neutron production cross sections predicted by FLUK
Measurement of Charged Pion Production Yields off the NuMI Target
The fixed-target MIPP experiment, Fermilab E907, was designed to measure the
production of hadrons from the collisions of hadrons of momenta ranging from 5
to 120 GeV/c on a variety of nuclei. These data will generally improve the
simulation of particle detectors and predictions of particle beam fluxes at
accelerators. The spectrometer momentum resolution is between 3 and 4%, and
particle identification is performed for particles ranging between 0.3 and 80
GeV/c using , time-of-flight and Cherenkov radiation measurements. MIPP
collected events of 120 GeV Main Injector protons striking a
target used in the NuMI facility at Fermilab. The data have been analyzed and
we present here charged pion yields per proton-on-target determined in bins of
longitudinal and transverse momentum between 0.5 and 80 GeV/c, with combined
statistical and systematic relative uncertainties between 5 and 10%.Comment: 15 pages, 13 figure
Confirmation of the Double Charm Baryon Xi_cc+ via its Decay to p D+ K-
We observes a signal for the double charm baryon Xi_cc+ in the charged decay
mode Xi_cc+ -> p D+ K- to complement the previously reported decay Xi_cc+ ->
Lambda_c K- pi+ in data from SELEX, the charm hadro-production experiment
(E781) at Fermilab. In this new decay mode we observe an excess of 5.62 events
over an expected background estimated by event mixing to be 1.38+/-0.13 events.
The Poisson probability that a background fluctuation can produce the apparent
signal is less than 6.4E-4. The observed mass of this state is
(3518+/-3)MeV/c^2, consistent with the published result. Averaging the two
results gives a mass of (3518.7+/-1.7)MeV/c^2. The observation of this new weak
decay mode confirms the previous SELEX suggestion that this state is a double
charm baryon. The relative branching ratio Gamma(Xi_cc+ -> pD+K-)/Gamma(Xi_cc+
-> Lambda_c K- pi+) = 0.36+/-0.21.Comment: 11 pages, 6 included eps figures. v2 includes improved statistical
method to determine significance of observation. Submitted to PL
First observation of a narrow charm-strange meson DsJ(2632) -> Ds eta and D0 K+
We report the first observation of a charm-strange meson DsJ(2632) at a mass
of 2632.6+/-1.6 MeV/c^2 in data from SELEX, the charm hadro-production
experiment E781 at Fermilab. This state is seen in two decay modes, Ds eta and
D0 K+. In the Ds eta decay mode we observe an excess of 49.3 events with a
significance of 7.2sigma at a mass of 2635.9+/-2.9 MeV/c^2. There is a
corresponding peak of 14 events with a significance of 5.3sigma at 2631.5+/-1.9
MeV/c^2 in the decay mode D0 K+. The decay width of this state is <17 MeV/c^2
at 90% confidence level. The relative branching ratio Gamma(D0K+)/Gamma(Dseta)
is 0.16+/-0.06. The mechanism which keeps this state narrow is unclear. Its
decay pattern is also unusual, being dominated by the Ds eta decay mode.Comment: 5 pages, 3 included eps figures. v2 as accepted for publication by
PR
- âŠ