15 research outputs found
First operation and performance of a 200 lt double phase LAr LEM-TPC with a 40x76 cm^2 readout
In this paper we describe the design, construction, and operation of a first
large area double-phase liquid argon Large Electron Multiplier Time Projection
Chamber (LAr LEM-TPC). The detector has a maximum drift length of 60 cm and the
readout consists of a cm LEM and 2D projective anode to
multiply and collect drifting charges. Scintillation light is detected by means
of cryogenic PMTs positioned below the cathode. To record both charge and light
signals, we have developed a compact acquisition system, which is scalable up
to ton-scale detectors with thousands of charge readout channels. The
acquisition system, as well as the design and the performance of custom-made
charge sensitive preamplifiers, are described. The complete experimental setup
has been operated for a first time during a period of four weeks at CERN in the
cryostat of the ArDM experiment, which was equipped with liquid and gas argon
purification systems. The detector, exposed to cosmic rays, recorded events
with a single-channel signal-to-noise ratio in excess of 30 for minimum
ionising particles. Cosmic muon tracks and their -rays were used to
assess the performance of the detector, and to estimate the liquid argon purity
and the gain at different amplification fields.Comment: 23 pages, 21 figure
Giant Liquid Argon Observatory for Proton Decay, Neutrino Astrophysics and CP-violation in the Lepton Sector (GLACIER)
GLACIER (Giant Liquid Argon Charge Imaging ExpeRiment) is a large underground
observatory for proton decay search, neutrino astrophysics and CP-violation
studies in the lepton sector. Possible underground sites are studied within the
FP7 LAGUNA project (Europe) and along the JPARC neutrino beam in collaboration
with KEK (Japan). The concept is scalable to very large masses.Comment: 4 pages, 1 figure, Contribution to the Workshop "European Strategy
for Future Neutrino Physics", CERN, Oct. 200
First operation and drift field performance of a large area double phase LAr Electron Multiplier Time Projection Chamber with an immersed Greinacher high-voltage multiplier
We have operated a liquid-argon large-electron-multiplier time-projection
chamber (LAr LEM-TPC) with a large active area of 76 40 cm and a
drift length of 60 cm. This setup represents the largest chamber ever achieved
with this novel detector concept. The chamber is equipped with an immersed
built-in cryogenic Greinacher multi-stage high-voltage (HV) multiplier, which,
when subjected to an external AC HV of 1 kV, statically
charges up to a voltage a factor of 30 higher inside the LAr vessel,
creating a uniform drift field of 0.5 kV/cm over the full drift length.
This large LAr LEM-TPC was brought into successful operation in the
double-phase (liquid-vapor) operation mode and tested during a period of
1 month, recording impressive three-dimensional images of very
high-quality from cosmic particles traversing or interacting in the sensitive
volume. The double phase readout and HV systems achieved stable operation in
cryogenic conditions demonstrating their good characteristics, which
particularly suit applications for next-generation giant-scale LAr-TPCs.Comment: 26 pages, 19 figure
ArDM: first results from underground commissioning
The Argon Dark Matter experiment is a ton-scale double phase argon Time
Projection Chamber designed for direct Dark Matter searches. It combines the
detection of scintillation light together with the ionisation charge in order
to discriminate the background (electron recoils) from the WIMP signals
(nuclear recoils). After a successful operation on surface at CERN, the
detector was recently installed in the underground Laboratorio Subterr\'aneo de
Canfranc, and the commissioning phase is ongoing. We describe the status of the
installation and present first results from data collected underground with the
detector filled with gas argon at room temperature.Comment: 6 pages, 3 figures, Light Detection In Noble Elements (LIDINE 2013
Status of the ArDM Experiment: First results from gaseous argon operation in deep underground environment
The Argon Dark Matter (ArDM-1t) experiment is a ton-scale liquid argon (LAr)
double-phase time projection chamber designed for direct Dark Matter searches.
Such a device allows to explore the low energy frontier in LAr. After
successful operation on surface at CERN, the detector has been deployed
underground and is presently commissioned at the Canfranc Underground
Laboratory (LSC). In this paper, we describe the status of the installation and
present first results on data collected in gas phase.Comment: 21 pages, 20 figure
First results on light readout from the 1-ton ArDM liquid argon detector for dark matter searches
ArDM-1t is the prototype for a next generation WIMP detector measuring both
the scintillation light and the ionization charge from nuclear recoils in a
1-ton liquid argon target. The goal is to reach a minimum recoil energy of
30\,keVr to detect recoiling nuclei. In this paper we describe the experimental
concept and present results on the light detection system, tested for the first
time in ArDM on the surface at CERN. With a preliminary and incomplete set of
PMTs, the light yield at zero electric field is found to be between 0.3-0.5
phe/keVee depending on the position within the detector volume, confirming our
expectations based on smaller detector setups.Comment: 14 pages, 10 figures, v2 accepted for publication in JINS
The ArDM experiment
The aim of the ArDM project is the development and operation of a one ton
double-phase liquid argon detector for direct Dark Matter searches. The
detector measures both the scintillation light and the ionization charge from
ionizing radiation using two independent readout systems. This paper briefly
describes the detector concept and presents preliminary results from the ArDM
R&D program, including a 3 l prototype developed to test the charge readout
system.Comment: Proceedings of the Epiphany 2010 Conference, to be published in Acta
Physica Polonica
Development of wavelength shifter coated reflectors for the ArDM argon dark matter detector
To optimise the design of the light readout in the ArDM 1-ton liquid argon
dark matter detector, a range of reflector and WLS coating combinations were
investigated in several small setups, where argon scintillation light was
generated by radioactive sources in gas at normal temperature and pressure and
shifted into the blue region by tetraphenyl butadiene (TPB). Various
thicknesses of TPB were deposited by spraying and vacuum evaporation onto
specular 3M{\small\texttrademark}-foil and diffuse
Tetratex{\small\textregistered} (TTX) substrates. Light yields of each
reflector and TPB coating combination were compared. Reflection coefficients of
TPB coated reflectors were independently measured using a spectroradiometer in
a wavelength range between 200 and 650 nm. WLS coating on the PMT window was
also studied. These measurements were used to define the parameters of the
light reflectors of the ArDM experiment. Fifteen large cm
TTX sheets were coated and assembled in the detector. Measurements in argon gas
are reported providing good evidence of fulfilling the light collection
requirements of the experiment.Comment: 21 pages, 17 figure
DM: a ton-scale LAr detector for direct Dark Matter searches
The Argon Dark Matter (ArDM-1t) experiment is a ton-scale liquid argon (LAr) double-phase time projection chamber designed for direct Dark Matter searches. Such a device allows to explore the low energy frontier in LAr with a charge imaging detector. The ionization charge is extracted from the liquid into the gas phase and there amplified by the use of a Large Electron Multiplier in order to reduce the detection threshold. Direct detection of the ionization charge with fine spatial granularity, combined with a measurement of the amplitude and time evolution of the associated primary scintillation light, provide powerful tools for the identification of WIMP interactions against the background due to electrons, photons and possibly neutrons if scattering more than once. A one ton LAr detector is presently installed on surface at CERN to fully test all functionalities and it will be soon moved to an underground location. We will emphasize here the lessons learned from such a device for the design of a large LAr TPC for neutrino oscillation, proton decay and astrophysical neutrinos searches