Fluorescence based detection of bioaerosols to improve emissions characterization from environmental sources

Bioaerosols are ubiquitous in ambient air but there have been increasing concerns about their human exposure and to health impact due to ever increasing environmental emissions from sources such as biowaste and intensive agriculture facilities (Borlée et al. 2015). However, the knowledge on their risk of exposure to the public is limited mainly due to a lack of emission characterisation, in part due to the limitation of conventional methods for the detection and characterisation of ambient bioaerosols. Among emerging techniques, fluorescence spectroscopy has shown promise in detecting and broadly classifying bioaerosols (Pan et al. 2015). This paper provides the preliminary results of a study that aims to demonstrate the potential of a fluorescence based bioaerosol sensor unit to detect and quantify these in real time with a view to developing and advancing bioaerosol exposure assessment methodologies to various environmental sources

Rotating biological contactors for wastewater treatment - A review

Rotating biological contactors (RBCs) for wastewater treatment began in the 1970s. Removal of organic matter has been targeted within organic loading rates of up to 120 g m−2 d−1 with an optimum at around 15 g m−2 d−1 for combined BOD and ammonia removal. Full nitrification is achievable under appropriate process conditions with oxidation rates of up to 6 g m−2 d−1 reported for municipal wastewater. The RBC process has been adapted for denitrification with reported removal rates of up to 14 g m−2 d−1 with nitrogen rich wastewaters. Different media types can be used to improve organic/nitrogen loading rates through selecting for different bacterial groups. The RBC has been applied with only limited success for enhanced biological phosphorus removal and attained up to 70% total phosphorus removal. Compared to other biofilm processes, RBCs had 35% lower energy costs than trickling filters but higher demand than wetland systems. However, the land footprint for the same treatment is lower than these alternatives. The RBC process has been used for removal of priority pollutants such as pharmaceuticals and personal care products. The RBC system has been shown to eliminate 99% of faecal coliforms and the majority of other wastewater pathogens. Novel RBC reactors include systems for energy generation such as algae, methane production and microbial fuel cells for direct current generation. Issues such as scale up remain challenging for the future application of RBC technology and topics such as phosphorus removal and denitrification still require further research. High volumetric removal rate, solids retention, low footprint, hydraulic residence times are characteristics of RBCs. The RBC is therefore an ideal candidate for hybrid processes for upgrading works maximising efficiency of existing infrastructure and minimising energy consumption for nutrient removal. This review will provide a link between disciplines and discuss recent developments in RBC research and comparison of recent process designs are provided (Section 2). The microbial features of the RBC biofilm are highlighted (Section 3) and topics such as biological nitrogen removal and priority pollutant remediation are discussed (Sections 4 and 5). Developments in kinetics and modelling are highlighted (Section 6) and future research themes are mentioned

Long-term impact of sewage sludge application on soil microbial biomass: An evaluation using meta-analysis

The Long-Term Sludge Experiments (LTSE) began in 1994 as part of continuing research into the effects of sludge-borne heavy metals on soil fertility. The long-term effects of Zn, Cu, and Cd on soil microbial biomass carbon (Cmic) were monitored for 8 years (1997-2005) in sludge amended soils at nine UK field sites. To assess the statutory limits set by the UK Sludge (Use in Agriculture) Regulations the experimental data has been reviewed using the statistical methods of meta-analysis. Previous LTSE studies have focused predominantly on statistical significance rather than effect size, whereas meta-analysis focuses on the magnitude and direction of an effect, i.e. the practical significance, rather than its statistical significance. The results presented here show that significant decreases in Cmic have occurred in soils where the total concentrations of Zn and Cu fall below the current UK statutory limits. For soils receiving sewage sludge predominantly contaminated with Zn, decreases of approximately 7–11% were observed at concentrations below the UK statutory limit. The effect of Zn appeared to increase over time, with increasingly greater decreases in Cmic observed over a period of 8 years. This may be due to an interactive effect between Zn and confounding Cu contamination which has augmented the bioavailability of these metals over time. Similar decreases (7–12%) in Cmic were observed in soils receiving sewage sludge predominantly contaminated with Cu; however, Cmic appeared to show of recovery after a period of 6 years. Application of sewage sludge predominantly contaminated with Cd appeared to have no effect on Cmic at concentrations below the current UK statutory limit

Estimation of particulate matter and gaseous concentrations using low-cost sensors from broiler houses

Particulate and gaseous emissions from intensive poultry facilities are major public and environmental health concern. The present study was aimed at exploratively monitoring particulate matter (PM) and gaseous concentrations in controlled-environment facilities using low-cost sensors in Lahore, Pakistan. The indoors and outdoors of 18 broiler houses, grouped into three categories based on the age of birds: group I (1–20 days), group II (21–30 days) and group III (31–40 days), were examined. Low-cost sensors Dylos 1700 and Aeroqual 500 series with different gas sensor heads were used to monitor PM and different gases such as nitrogen dioxide (NO2), hydrogen sulphide (H2S), carbon dioxide (CO2) and methane (CH4), respectively. Overall, the mean PM and gaseous concentrations increased with the age and activity of birds as compared with the non-activity time of birds. Statistically significant differences were observed in all measured parameters among the groups. The negative correlation between indoor and outdoor environments for PM and gas concentrations at some broiler houses demonstrates the contribution of additional sources to emissions in outdoor environments. The findings contribute to our knowledge of temporal characteristics of particulate and gaseous concentrations from poultry facilities particularly in Pakistan and generally to the capability of using low-cost sensors to evaluate emissions from such facilities

Characterisation of organomineral fertilisers derived from nutrient-enriched biosolids granules

Organomineral fertilisers (OMFs) were produced by coating biosolids granules with urea and potash. Two OMF formulations with N : P2O5 : K2O compositions: 10 : 4 : 4 (OMF10) and 15 : 4 : 4 (OMF15) were developed for application in grassland and arable crops. Routine fertiliser analyses were conducted on four batches of OMF and biosolids granules and compared with a sample of urea to determine key physical and chemical properties of the materials which affect handling and spreading, soil behaviour, and fertiliser value. Bulk and particle densities were in the range of 608 to 618 kg m−3, and 1297 to 1357 kg m−3, respectively. Compression tests showed that OMF particles undergo deformation followed by multiple failures without disintegration of the granules when vertical load was applied. Static particle strength was between 1.18 and 4.33 N mm−2 depending on the particle diameter. The use of a model for fertiliser particle distribution studies showed that OMF granules should be between 1.10 and 5.50 mm in diameter with about 80% of the particles in the range of 2.25 to 4.40 mm to enable application at 18 m tramline spacing. This research utilises novel technology to improve the fertiliser value of biosolids, reduce disposal costs, and deliver a range of environmental benefits associated with recycling

An experimental investigation of the combustion performance of human faeces

Poor sanitation is one of the major hindrances to the global sustainable development goals. The Reinvent the Toilet Challenge of the Bill and Melinda Gates Foundation is set to develop affordable, next-generation sanitary systems that can ensure safe treatment and wide accessibility without compromise on sustainable use of natural resources and the environment. Energy recovery from human excreta is likely to be a cornerstone of future sustainable sanitary systems. Faeces combustion was investigated using a bench-scale downdraft combustor test rig, alongside with wood biomass and simulant faeces. Parameters such as air flow rate, fuel pellet size, bed height, and fuel ignition mode were varied to establish the combustion operating range of the test rig and the optimum conditions for converting the faecal biomass to energy. The experimental results show that the dry human faeces had a higher energy content (∼25 MJ/kg) than wood biomass. At equivalence ratio between 0.86 and 1.12, the combustion temperature and fuel burn rate ranged from 431 to 558 °C and 1.53 to 2.30 g/min respectively. Preliminary results for the simulant faeces show that a minimum combustion bed temperature of 600 ± 10 °C can handle faeces up to 60 wt.% moisture at optimum air-to-fuel ratio. Further investigation is required to establish the appropriate trade-off limits for drying and energy recovery, considering different stool types, moisture content and drying characteristics. This is important for the design and further development of a self-sustained energy conversion and recovery systems for the NMT and similar sanitary solutions

Sources of Airborne Endotoxins in Ambient Air and Exposure of Nearby Communities—A Review

Endotoxin is a bioaerosol component that is known to cause respiratory effects in exposed populations. To date, most research focused on occupational exposure, whilst much less is known about the impact of emissions from industrial operations on downwind endotoxin concentrations. A review of the literature was undertaken, identifying studies that reported endotoxin concentrations in both ambient environments and around sources with high endotoxin emissions. Ambient endotoxin concentrations in both rural and urban areas are generally below 10 endotoxin units (EU) m−3; however, around significant sources such as compost facilities, farms, and wastewater treatment plants, endotoxin concentrations regularly exceeded 100 EU m−3. However, this is affected by a range of factors including sampling approach, equipment, and duration. Reported downwind measurements of endotoxin demonstrate that endotoxin concentrations can remain above upwind concentrations. The evaluation of reported data is complicated due to a wide range of different parameters including sampling approaches, temperature, and site activity, demonstrating the need for a standardised methodology and improved guidance. Thorough characterisation of ambient endotoxin levels and modelling of endotoxin from pollution sources is needed to help inform future policy and support a robust health-based risk assessment process

Non-isothermal thermogravimetric kinetic analysis of the thermochemical conversion of human faeces

The “Reinvent the Toilet Challenge” set by the Bill & Melinda Gates Foundation aims to bring access to adequate sanitary systems to billions of people. In response to this challenge, on-site sanitation systems are proposed and being developed globally. These systems require in-situ thermal treatment, processes that are not well understood for human faeces (HF). Thermogravimetric analysis has been used to investigate the pyrolysis, gasification and combustion of HF. The results are compared to the thermal behaviour of simulant faeces (SF) and woody biomass (WB), along with the blends of HF and WB. Kinetic analysis was conducted using non-isothermal kinetics model-free methods, and the thermogravimetric data obtained for the combustion of HF, SS and WB. The results show that the devolatilisation of HF requires higher temperatures and rates are slower those of WB. Minimum temperatures of 475 K are required for fuel ignition. HF and SF showed similar thermal behaviour under pyrolysis, but not under combustion conditions. The activation energy for HF is 157.4 kJ/mol, relatively higher than SS and WB. Reaction order for HF is lower (n = 0.4) to WB (n = 0.6). In-situ treatment of HF in on-site sanitary systems can be designed for slow progressive burn

Pyrolysis characteristics and kinetics of human faeces, simulant faeces and wood biomass by thermogravimetry–gas chromatography–mass spectrometry methods

Human faeces (HF) are treated as wastes in many parts of the world, a resource that can be converted to energy and fuels. To enhance the understanding of fuel conversion processes and decomposition characteristics, this study investigated the pyrolysis behaviour and evolved gas profiles of HF using thermogravimetry with gas chromatography–mass spectrometry methods. Kinetic parameters were deduced using model-free kinetic models. Results are compared with simulant faeces (SF), wood biomass (WB) and HF–WB blends. The pyrolysis of HF involved two decomposition peaks — a fronting peak with weight loss of ∼. The apparent activation energy for HF varied from 122–382 kJ/mol at conversion rates of 10%–90% using Kissinger–Akahira–Sunose model. Some of the key pyrolysis products for HF at 370 °C were 4-methoxy-phenol, n-hexadecanoic acid, phenol, 4-methyl- and indole isomer (pyrrolo[1,2-a]pyridine). At 530 °C, evolved gases were largely fragmented with high proportions of alkanes and alkenes including 3-dodecane, 2-undecane, 6-tridecene, 2-propenylidene-cyclobutene. These products differed to WB that are largely hydroxyphenyls and methoxyphenols with guaiacyl or syringil structures. Blending with WB improved pyrolysis of HF, irrespective of the proportions of blen

Managing power dissipation in closed-loop reverse electrodialysis to maximise energy recovery during thermal-to-electric conversion

Whilst the efficiency of reverse electrodialysis (RED) for thermal-to-electrical conversion has been theoretically demonstrated for low-grade waste heat, the specific configuration and salinity required to manage power generation has been less well described. This study demonstrates that operating RED by recycling feed solutions provides the most suitable configuration for energy recovery from a fixed solution volume, providing a minimum unitary cost for energy production. For a fixed membrane area, recycling feeds achieves energy efficiency seven times higher than single pass (conventional operation), and with an improved power density. However, ionic transport, water flux and concentration polarisation introduce complex temporal effects when concentrated brines are recirculated, that are not ordinarily encountered in single pass systems. Regeneration of the concentration gradient at around 80% energy dissipation was deemed most economically pragmatic, due to the increased resistance to mass transport beyond this threshold. However, this leads to significant exergy destruction that could be improved by interventions to better control ionic build up in the dilute feed. Further improvements to energy efficiency were fostered through optimising current density for each brine concentration independently. Whilst energy efficiency was greatest at lower brine concentrations, the work produced from a fixed volume of feed solution was greatest at higher saline concentrations. Since the thermal-to-electrical conversion proposed is governed by volumetric heat utilisation (distillation to reset the concentration gradient), higher brine concentrations are therefore recommended to improve total system efficiency. Importantly, this study provides new evidence for the configuration and boundary conditions required to realise RED as a practical solution for application to sources of low-grade waste heat in industr