446 research outputs found
Low-threshold organic laser based on an oligofluorene truxene with low optical losses
A blue-emitting distributed feedback laser based on a star-shaped oligofluorene truxene molecule is presented. The gain, loss, refractive index, and (lack of) anisotropy are measured by amplified spontaneous emission and variable-angle ellipsometry. The waveguide losses are very low for an organic semiconductor gain medium, particularly for a neat film. The results suggest that truxenes are promising for reducing loss, a key parameter in the operation of organic semiconductor lasers. Distributed feedback lasers fabricated from solution by spin-coating show a low lasing threshold of 270 W/cm(2) and broad tunability across 25 nm in the blue part of the spectrum
Organic solar cells as high-speed data detectors for visible light communication
Funding: Engineering and Physical Sciences Research Council (EPSRC) (EP/I00243X, EP/K00042X/1, EP/K008757/1).We show that solar cells, widely used in portable devices for power generation, can simultaneously extract a high-speed data signal in an optical wireless communication link. This Letter reports, to the best of our knowledge, the first use of an organic solar cell as an energy-harvesting receiver for visible light communications (VLCs). While generating maximum power in the cell, the communication link can deliver a data rate of 34.2 Mbps with a bit error rate of 4.08 x 10(-4) using an implementation of orthogonal frequency-division multiplexing. This approach could lead to printed optical data receivers in future eco-friendly VLC systems. Simultaneous functions of data communication and energy harvesting have great implications for the connectivity of future smart devices, many of which could become self-powered units as part of the "Internet of Things."PostprintPeer reviewe
High-Bandwidth Organic Light Emitting Diodes for Ultra-Low Cost Visible Light Communication Links
Visible light communications (VLC) have attracted considerable interest in recent years due to an increasing need for data communication links in home and enterprise environments. Organic light-emitting diodes (OLEDs) are widely used in display applications owing to their high brightness, high quality colour-rending capability and low cost. As a result, they are attractive candidates for the implementation of ultra-low cost visible light optical links in free-space and guided-wave communications. However, OLEDs need to exhibit a bandwidth of at least ~MHz to be able to support the modest data rates (~Mbps) required in these applications. Although fluorescent OLEDs typically exhibit shorter photon lifetimes than inorganic LEDs, the bandwidth performance of the large size OLEDs used in display applications are limited by their electrical characteristics. In this work, we present a detailed physical simulation that describes well the performance of fast OLED devices that exhibit significant -3 dB bandwidths (f-3dB) of 44 MHz obtained for a 0.12 mm2 device. It is demonstrated that the reduction of the device size results in a significant bandwidth improvement due primarily to a reduction in parasitic capacitance of the devices, though this is counteracted by carrier dynamic effects. The model provides an insight into the basic physical properties of the OLED and may be used for optimisation of future generations of OLED devices.EPSRC EP/K00042X/1
EPSRC Studentship 146672
A low-cost, portable optical explosive-vapour sensor
This project has received funding from the European Union’s Seventh Framework Programme for research, technological development and demonstration under agreement no 284747. IDWS acknowledges a Royal Society Wolfson Research Merit Award. Data supporting this research can be found at http://dx.doi.org/10.17630/5868c89a-7019-4897-9c54-24ccc551a6e6.Humanitarian demining requires a broad range of methodologies and instrumentation for reliable identification of landmines, antipersonnel mines, and other explosive remnants of war (ERWs). Optical sensing methods are ideal for this purpose due to advantages in sensitivity, time-of-response and small form factor. In this work we present a portable photoluminescence-based sensor for nitroaromatic vapours based on the conjugated polymer Super Yellow integrated into an instrument comprising an excitation LED, photodiode, Arduino microprocessor and pumping mechanics for vapour delivery. The instrument was shown to be sensitive to few-ppb concentrations of explosive vapours under laboratory conditions, and responds to simulated buried landmine vapour. The results indicate that a lightweight, easy-to-operate, lowcost and highly-sensitive optical sensor can be readily constructed for landmine and ERW detection in the field, with potential to aid worldwide efforts in landmine mitigation.PostprintPeer reviewe
Biomonitoring for wide area surveying in landmine detection using honeybees and optical sensing
This project has received funding from NATO Science for Peace & Security under grant agreement MYP G5355, and the Engineering and Physical Sciences Research Council under EP/K503940/1.Humanitarian demining is a worldwide effort and the range of climates and environments prevent any one detection method being suitable for all sites, so more tools are required for safe and efficient explosives sensing. Landmines emit a chemical flux over time, and honeybees can collect the trace residues of explosives (as particles or as vapour) on their body hairs. This capability was exploited using a passive method allowing the honeybees to freely forage in a mined area, where trace explosives present in the environment stuck to the honeybee body, which were subsequently transferred onto an adsorbent material for analysis by a fluorescent polymer sensor. Potential false positive sources were investigated, namely common bee pheromones, the anti-varroa pesticide Amitraz, and the environment around a clean apiary, and no significant response was found to any from the sensor. The mined site gave a substantial response in the optical sensor films, with quenching efficiencies of up to 38%. A model was adapted to estimate the mass of explosives returned to the colony, which may be useful for estimating the number of mines in a given area.PostprintPeer reviewe
Perceptions Of School By Two Teenage Boys With Asperger Syndrome And Their Mothers: A Qualitative Study
This qualitative study aimed to develop an understanding of the challenges faced by teenage boys with Asperger syndrome and their mothers. A case study approach was used to collect data from two 13-year-old boys who have Asperger syndrome and their mothers in Queensland, Australia. Data were collected through the use of semi¬structured interviews. The words of the boys and their mothers provide a valuable insight into the personal experiences and feelings of the par¬ticipants. An inductive approach to data analysis identified four themes: (1) developmental differences; (2) problems associated with the general characteristics of Asperger syndrome (i.e. communication and social difficulties, restricted range of interests, a need for routine); (3) stress; and (4) 'masquerading'. The first three themes relate strongly to the current literature, but the emergence of masquerading is of particular interest in developing a fuller understanding of the experiences of individuals with Asperger syndrome at school
245 MHz bandwidth organic light-emitting diodes used in a gigabit optical wireless data link
Funding: UK EPSRC (EP/K00042X/I, EP/R005281/1, EP/R007101/1 and EP/R035164/1); Marie Skłodowska Curie Individual Fellowship (703387).Organic optoelectronic devices combine high-performance, simple fabrication and distinctive form factors. They are widely integrated in smart devices and wearables as flexible, high pixel density organic light emitting diode (OLED) displays, and may be scaled to large area by roll-to-roll printing for lightweight solar power systems. Exceptionally thin and flexible organic devices may enable future integrated bioelectronics and security features. However, as a result of their low charge mobility, these are generally thought to be slow devices with microsecond response times, thereby limiting their full scope of potential applications. By investigating the factors limiting their bandwidth and overcoming them, we demonstrate here exceptionally fast OLEDs with bandwidths in the hundreds of MHz range. This opens up a wide range of potential applications in spectroscopy, communications, sensing and optical ranging. As an illustration of this, we have demonstrated visible light communication using OLEDs with data rates exceeding 1 gigabit per second.Publisher PDFPeer reviewe
Honeybee-based biohybrid system for landmine detection
This research was funded in part by NATO Science for Peace and Security (SPS) Programme, project number SPS 985355, “Biological Method (Bees) for Explosive Detection”.Legacy landmines in post-conflict areas are a non-discriminatory lethal hazard and can still be triggered decades after the conflict has ended. Efforts to detect these explosive devices are expensive, time-consuming, and dangerous to humans and animals involved. While methods such as metal detectors and sniffer dogs have successfully been used in humanitarian demining, more tools are required for both site surveying and accurate mine detection. Honeybees have emerged in recent years as efficient bioaccumulation and biomonitoring animals. The system reported here uses two complementary landmine detection methods: passive sampling and active search. Passive sampling aims to confirm the presence of explosive materials in a mine-suspected area by the analysis of explosive material brought back to the colony on honeybee bodies returning from foraging trips. Analysis is performed by light-emitting chemical sensors detecting explosives thermally desorbed from a preconcentrator strip. The active search is intended to be able to pinpoint the place where individual landmines are most likely to be present. Used together, both methods are anticipated to be useful in an end-to-end process for area surveying, suspected hazardous area reduction, and post-clearing internal and external quality control in humanitarian demining.Publisher PDFPeer reviewe
Self-trapping and excited state absorption in fluorene homo-polymer and copolymers with benzothiadiazole and tri-phenylamine
We thank the EPSRC [EP/J009318/1 and EP/J009016/1] for funding. MJP thanks the European Research Council (ERC) for funding under the European Union’s Seventh Framework Programme (FP7/2007-2013)/ERC Grant No. 258990.Excited state absorption (ESA) is studied using time-dependent density functional theory and compared with experiments performed in dilute solutions. The molecules investigated are a fluorene pentamer, polyfluorene F8, the alternating F8 copolymer with benzothiadiazole F8BT, and two blue-emitting random copolymers F8PFB and F8TFB. Calculated and measured spectra show qualitatively comparable results. The ESA cross-section of co-polymers at its maximum is about three times lower than that of F8. The ESA spectra are found to change little upon structural relaxation of the excited state, or change in the order of sub-units in a co-polymer, for all studied molecules. In all these molecules, the strongest ESA transition is found to arise from the same electronic process, exhibiting a reversal of the charge parity. In addition, F8PFB and F8TFB are found to possess almost identical electronic behaviour.Publisher PDFPeer reviewe
Distributed feedback lasers based on green fluorescent protein and conformal high refractive index oxide layers
Funding: European Research Council (ERC StG ABLASE, 640012). M.K. and A.M. acknowledge funding from the EPSRC DTG (EP/M506631/1 and EP/M508214/1). L.T. acknowledges studentship funding through the EPSRC CM-CDT (EP/L015110/1). M.S. acknowledges funding from the Royal Society (Dorothy Hodgkin Fellowship, DH160102). I.D.W.S. acknowledges funding from a Royal Society Wolfson research merit award.Fluorescent proteins have emerged as an attractive gain material for lasers, especially for devices requiring biocompatibility. However, due to their optical properties, integration with distributed feedback (DFB) resonators is not readily achievable. Here, a DFB laser with enhanced green fluorescent protein (eGFP) as the gain material is demonstrated by incorporating a thin (65 nm), high refractive index (n = 2.12) ZrO2 interlayer as waveguide core. Deposition of ZrO2 via atomic layer deposition yields a smooth and conformal film as required to minimize optical losses. Lasing emission is obtained from 2D second‐order DFB eGFP lasers at pump power densities above 56.6 kW cm–2 and a wavelength tuning range of Δλ = 51.7 nm is demonstrated. Furthermore, it is shown that in contrast to conventional organic DFB lasers, both transverse electric (TE) and transverse magnetic (TM) modes are accessible. The effective refractive index of these modes can be predicted accurately through optical modelling. Using far‐field imaging, the laser beam profile is studied and TE and TM modes are distinguished.Publisher PDFPeer reviewe
- …