Communications satellite systems capacity analysis

Analog and digital modulation techniques are compared with regard to efficient use of the geostationary orbit by communications satellites. Included is the definition of the baseline systems (both space and ground segments), determination of interference susceptibility, calculation of orbit spacing, and evaluation of relative costs. It is assumed that voice or TV is communicated at 14/11 GHz using either FM or QPSK modulation. Both the Fixed-Satellite Service and the Broadcasting-Satellite Service are considered. For most of the cases examined the digital approach requires a satellite spacing less than or equal to that required by the analog approach

Further investigation of a contactless patient-electrode interface of an Electrical Impedance Mammography system

The Sussex Mk4 Electrical Impedance Mammography (EIM) system is a novel instrument, designed for the detection of early breast cancer, based upon Electrical Impedance Tomography (EIT). Many innovations in the field have been incorporated in the design improving both signal distribution and response. This paper investigates the behaviour of the contactless patient-electrode interface. The interface was studied in detail using phantom and healthy volunteer, in-vivo, data. Our findings show the necessity for the careful design of electrode enclosure so that the response of the system is not affected by the unpredictable positioning of the breast; it closely mimics those conditions seen when using the phantom. The paper includes a number of possible designs and their individual characteristics. In addition an explanation on the unanticipated effects and solutions for such are described. © 2010 IOP Publishing Ltd

Sustainable Construction: Analysis of its Costs and Benefits

Sustainability has become the most important issue concerning the construction industry in the 21st century. The objectives of this paper were: to establish if there is an opinion within the industry that sustainability means increased cost; and to investigate whether using sustainable construction methods save money by reducing a buildings carbon output and running costs. Following the literature survey, a questionnaire survey has been carried out to canvas opinions within the industry. Furthermore, comparison of a traditionally built structure (the original college) against a sustainably built one (the structure being built to replace the original building) has been carried out as a case study with respect to the running costs and carbon outputs. The findings revealed that there is an opinion within the industry that sustainability means increased cost and complicated build ability and that using sustainable construction methods save money by reducing a buildings carbon output and running costs. This paper will benefit clients and developers as they can see how incorporating sustainability into new buildings will enable big savings on utility and maintenance costs once the building is operational

Media outlets and their moguls: why concentrated individual or family ownership is bad for editorial independence

This article investigates the levels of owner influence in 211 different print and broadcast outlets in 32 different European media markets. Drawing on the literature from industrial organisation, it sets out reasons why we should expect greater levels of influence where ownership of individual outlets is concentrated; where it is concentrated in the hands of individuals or families; and where ownership groups own multiple outlets in the same media market. Conversely, we should expect lower levels of influence where ownership is dispersed between transnational companies. The articles uses original data on the ownership structures of these outlets, and combines it with reliable expert judgments as to the level of owner influence in each of the outlets. These hypotheses are tested and confirmed in a multilevel regression model of owner influence. The findings are relevant for policy on ownership limits in the media, and for the debate over transnational versus local control of media

Comparison of Howland and General Impedance Converter (GIC) circuit based current sources for bio-impedance measurements

The current source is a key component in bio-impedance measurement systems. The accuracy of the current source can be measured in terms of its output impedance together with other parameters, with certain applications demanding extremely high output impedance. This paper presents an investigation and comparison of different current source designs based on the Enhanced Howland circuit combined with a General Impedance Converter (GIC) circuit using both ideal and non-ideal operational amplifiers. Under differing load conditions two different settings of the GIC are evaluated and the results are compared to show its performance settings. Whilst the study has shown that over a wide bandwidth (i.e. 100Hz-100MHz) the output impedance is limited, operation over a more limited range offers output impedance in the Giga-ohm range, which can be considered as being infinite

A flexible low-cost, high-precision, single interface electrical impedance tomography system for breast cancer detection using FPGA

Typically, in multi-frequency Electrical Impedance Tomography (EIT) systems, a current is applied and the voltages developed across the subject are detected. However, due to the complexity of designing stable current sources, there has been mention in the literature of applying a voltage to the subject whilst measuring the consequent current flow. This paper presents a comparative study between the two techniques in a novel design suitable for the detection of breast cancers. The suggested instrument borrows the best features of both the injection of current and the application of voltage, circumventing their limitations. Furthermore, the system has a common patient-electrode interface for both methodologies, whilst the control of the system and the necessary signal processing is carried out in a field programmable gate array (FPGA). Through this novel system, wide-bandwidth, low-noise, as well as high-speed (frame rate) can be achieved

Risk Prediction of Cardiovascular Disease in Type 2 Diabetes: A risk equation from the Swedish National Diabetes Register

OBJECTIVE—Risk prediction models obtained in samples from the general population do not perform well in type 2 diabetic patients. Recently, 5-year risk estimates were proposed as being more accurate than 10-year risk estimates. This study presents a diabetes-specific equation for estimation of the absolute 5-year risk of first incident fatal/nonfatal cardiovascular disease (CVD) in type 2 diabetic patients with use of A1C and clinical characteristics