878 research outputs found
Hydrological control of soil thickness spatial variability on the initiation of rainfall-induced shallow landslides using a three-dimensional model
Thickness and stratigraphic settings of soils covering slopes potentially control susceptibility to initiation of rainfall-induced shallow landslides due to their local effect on slope hydrological response. Notwithstanding the relevance of the assessment of hazard to shallow landsliding at a distributed scale by approaches based on a coupled modelling of slope hydrological response and slope stability, the spatial variability of soil thickness and stratigraphic settings are factors poorly considered in the literature. Under these premises, this paper advances the well-known case study of rainfall-induced shallow landslides involving ash-fall pyroclastic soils covering the peri-Vesuvian mountains (Campania, southern Italy). In such a unique geomorphological setting, the soil covering is formed by alternating loose ash-fall pyroclastic deposits and paleosols, with high contrasts in hydraulic conductivity and total thickness decreasing as the slope angle increases, thus leading to the establishment of lateral flow and an increase of pore water pressure in localised sectors of the slope where soil horizon thickness is less. In particular, we investigate the effects, on hillslope hydrological regime and slope stability, of irregular bedrock topography, spatial variability of soil thickness and vertical hydraulic heterogeneity of soil horizons, by using a coupled three-dimensional hydrological and a probabilistic infinite slope stability model. The modelling is applied on a sample mountain catchment, located on Sarno Mountains (Campania, southern Italy), and calibrated using physics-based rainfall thresholds derived from the literature. The results obtained under five simulated constant rainfall intensities (2.5, 5, 10, 20 and 40 mm h−1) show an increase of soil pressure head and major failure probability corresponding to stratigraphic and morphological discontinuities, where a soil thickness reduction occurs. The outcomes obtained from modelling match the hypothesis of the formation of lateral throughflow due to the effect of intense rainfall, which leads to the increase of soil water pressure head and water content, up to values of near-saturation, in narrow zones of the slope, such as those of downslope reduction of total soil thickness and pinching out of soil horizons. The approach proposed can be conceived as a further advance in the comprehension of slope hydrological processes at a detailed scale and their effects on slope stability under given rainfall and antecedent soil hydrological conditions, therefore in predicting the most susceptible areas to initiation of rainfall-induced shallow landslides and the related I-D rainfall thresholds. Results obtained demonstrate the occurrence of a slope hydrological response depending on the spatial variability of soil thickness and leading to focus slope instability in specific slope sectors. The approach proposed is conceived to be potentially exportable to other slope environments for which a spatial modelling of soil thickness would be possible
Efficient Thermal Electric Skipping Strategy Applied to the Control of Series/Parallel Hybrid Powertrain
The optimal control of hybrid powertrains represents one of the most challenging tasks for the compliance with the legislation concerning CO2 and pollutant emission of vehicles. Most common off-line optimization strategies (Pontryagin minimum principle-PMP-or dynamic programming) allow to identify the optimal control along a predefined driving mission at the expense of a quite relevant computational effort. On-line strategies, suitable for on-vehicle implementation, involve a certain performance degradation depending on their degree of simplification and computational effort. In this work, a simplified control strategy is presented, where the conventional power-split logics, typical of the above-mentioned strategies, is here replaced with an alternative utilization of the thermal and electric units for the vehicle driving (Efficient Thermal Electric Skipping Strategy-ETESS). The choice between the units is realized at each time and is based on the comparison between the effective fuel rate of the thermal engine and an equivalent fuel rate related to the electrical power consumption. The equivalent fuel rate in a pure electric driving is associated to a combination of brake specific fuel consumption of the thermal engine, and electro-mechanical efficiencies along the driveline. The ETESS is applied for the simulation of segment C hybrid vehicle, equipped with a thermal engine and two electric units (motor and generator). The methodology is tested along regulatory driving cycles (WLTP, Artemis) and RDE, with different powertrain variants. Numerical results underline that the proposed approach performs very close to most common control strategies (consumed fuel per kilometer higher than PMP of about 1% on average). The main advantage is a reduced computational effort (decrease of 99% on average). The ETESS is straightforwardly adapted for an on-line implementation, through the introduction of an adaptative factor, preserving the computational effort and the fuel economy
Probabilistic approaches for assessing rainfall thresholds triggering shallow landslides. The study case of the peri-vesuvian area (Southern Italy)
Ash-fall pyroclastic soil deposits covering steep carbonate slopes in the peri-Vesuvian area (southern Italy) are periodically involved in shallow landslides (about 700 events were recorded during the last three centuries, as reported by CASCINI et alii, 2008), triggered by intense and/or prolonged rainfall events, which evolve as catastrophic debris flows. In the last decades, many studies have been focused on estimating reliable relationships among the triggering of shallow landslides and the amount and duration of rainfall events, as well as the role played by antecedent soil hydrological conditions. Results of these studies have been expected to give information on temporal hazard to landslide onset to be used for setting a reliable early warning system. In this paper we present probabilistic approaches to assess rainfall thresholds triggering shallow landslides by classical empirical methods and to manage the uncertainties related to biases of data. At this scope, rainfall events related to the occurrence of debris flows along slopes of the Sarno and Lattari Mountains, known from chronicles of the last century, were analyzed by means of the empirical models of Intensity-Duration (I-D) (CAINE, 1980) and rainfall recorded in the day of the landslide occurrence (P) vs the antecedent cumulated rainfall (Pa) (CROZIER & EYLES, 1980). In order to limit and to assess uncertainties related to biases of rainfall data, a comparison with the regional probability model of high intensity rainfall, carried out in the framework of the VAPI Project (ROSSI & VILLANI, 1994) has been carried out. Moreover, rainfall data were processed by a bivariate logistic regression model resulting in the assessment of probability to landslide triggering, given an assumed rainfall event. The I-D empirical rainfall thresholds obtained by Caine model (1980) were compared to rainfall thresholds estimated by deterministic approaches (DE VITA et alii, 2013; NAPOLITANO et alii, 2016) showing a good match
Seasonal and event-based hydrological and slope stability modeling of pyroclastic fall deposits covering slopes in Campania (Southern Italy)
The pyroclastic fall deposits mantling mountain slopes in the Campania region (Southern Italy) represent one of the most studied geomorphological frameworks of the world regarding rainfall-induced debris flows threating urban areas. The proposed study focused on advancing knowledge about the hydrological response of pyroclastic fall coverings from the seasonal to event-based time scales, leading to the initiation of slope instability. The study was based on two consequential tasks. The first was the analysis of a six-year monitoring of soil pressure head carried out in a sample area of the Sarno Mountains, located above a debris flow initiation zone. The second was based on coupled hydrological and slope stability modeling performed on the physical models of slopes, which were reconstructed by empirical correlations between the slope angle, total thickness, and stratigraphic settings of pyroclastic fall deposits mantling slopes. The results obtained were: (a) The understanding of a soil pressure head regime of the volcaniclastic soil mantle, always ranging in unsaturated conditions and characterized by a strong seasonal variability depending on precipitation patterns and the life cycle of deciduous chestnut forest; and (b) the reconstruction through a deterministic approach of seasonal intensity-duration rainfall thresholds related to different morphological conditions
Impact of the laminar flame speed correlation on the results of a quasi-dimensional combustion model for Spark-Ignition engine
Abstract In the present study, the impact of the laminar flame speed correlation on the prediction of the combustion process and performance of a gasoline engine is investigated using a 1D numerical approach. The model predictions are compared with experimental data available for full- and part-load operations of a small-size naturally aspirated Spark-Ignition (SI) engine, equipped with an external EGR circuit. A 1D model of the whole engine is developed in the GT-Power™ environment and is integrated with refined sub-models of the in-cylinder processes. In particular, the combustion is modelled using the fractal approach, where the burning rate is directly related to the laminar flame speed. In this work, three laminar flame speed correlations are assessed, including both experimentally- and numerically-derived formulations, the latter resulting from the fitting of laminar flame speeds computed by a chemical kinetic solver. Each correlation is implemented within the combustion sub-model, which is properly tuned to reproduce the experimental performance of the engine at full load. Then, the reliability of the considered flame speed formulations is proved at part-loads, even under external EGR operations
Anthropogenic sinkholes of the city of Naples, Italy: an update
In recent years, the study of anthropogenic sinkholes in densely urbanized areas has attracted the attention of both researchers and land management entities. The city of Naples (Italy) has been frequently affected by processes generating such landforms in the last decades: for this reason, an update of the sinkhole inventory and a preliminary susceptibility estimation are proposed in this work. Starting from previous data, not modified since 2010, a total of 270 new events occurred in the period February 2010–June 2021 were collected through the examination of online newspapers, local daily reports, council chronicle news and field surveys. The final consistence of the updated inventory is of 458 events occurred between 1880 and 2021, distributed through time with an increasing trend in frequency. Spatial analysis of sinkholes indicates a concentration in the central sector of the city, corresponding to its ancient and historic centre, crossed by a dense network of underground tunnels and cavities. Cavity-roof collapse is confirmed as one of the potential genetic types, along with processes related to rainfall events and service lines damage. A clear correlation between monthly rainfall and the number of triggered sinkholes was identified. Finally, a preliminary sinkhole susceptibility assessment, carried out by Frequency Ratio method, confirms the central sector of city as that most susceptible to sinkholes and emphasizes the predisposing role of service lines, mostly in the outermost areas of the city
1D numerical and experimental investigations of an ultralean pre-chamber engine
In recent years, lean-burn gasoline Spark-Ignition (SI) engines have been a major subject of investigations. With this solution, in fact, it is possible to simultaneously reduce NOx raw emissions and fuel consumption due to decreased heat losses, higher thermodynamic efficiency, and enhanced knock resistance. However, the real applicability of this technique is strongly limited by the increase in cyclic variation and the occurrence of misfire, which are typical for the combustion of homogeneous lean air/fuel mixtures. The employment of a Pre-Chamber (PC), in which the combustion begins before proceeding in the main combustion chamber, has already shown the capability of significantly extending the lean-burn limit. In this work, the potential of an ultralean PC SI engine for a decisive improvement of the thermal efficiency is presented by means of numerical and experimental analyses. The SI engine is experimentally investigated with and without the employment of the PC with the aim to analyze the real gain of this innovative combustion system. For both configurations, the engine is tested at various speeds, loads, and air-fuel ratios. A commercial gasoline fuel is directly injected into the Main Chamber (MC), while the PC is fed in a passive or active mode. Compressed Natural Gas (CNG) or Hydrogen (H2) is used in the actual case. A 1D model of the engine under study is implemented in a commercial modeling framework and is integrated with “in-house developed” sub-models for the simulation of the combustion and turbulence phenomena occurring in this unconventional engine. The numerical approach proves to reproduce the experimental data with good accuracy, without requiring any case-dependent tuning of the model constants. Both the numerical and experimental results show an improvement of the indicated thermal efficiency of the active PC, compared to the conventional ignition device, especially at high loads and low speeds. The injection of H2 into the PC leads to a significant benefit only with very lean mixtures. With the passive fueling of the PC, the lean-burn limit is less extended, with the consequent lower improvement potential for thermal efficiency
Reexamining how utility and weighting functions get their shapes: A quasi-adversarial collaboration providing a new interpretation
In a paper published in Management Science in 2015, Stewart, Reimers, and Harris (SRH) demonstrated that shapes of utility and probability weighting functions could be manipulated by adjusting the distributions of outcomes and probabilities on offer as predicted by the theory of decision by sampling. So marked were these effects that, at face value, they profoundly challenge standard interpretations of preference theoretic models in which such functions are supposed to reflect stable properties of individual risk preferences. Motivated by this challenge, we report an extensive replication exercise based on a series of experiments conducted as a quasi-adversarial collaboration across different labs and involving researchers from both economics and psychology. We replicate the SRH effect across multiple experiments involving changes in many design features; importantly, however, we find that the effect is also present in designs modified so that decision by sampling predicts no effect. Although those results depend on model-based inferences, an alternative analysis using a model-free comparison approach finds no evidence of patterns akin to the SRH effect. On the basis of simulation exercises, we demonstrate that the SRH effect may be a consequence of misspecification biases arising in parameter recovery exercises that fit imperfectly specified choice models to experimental data. Overall, our analysis casts the SRH effect in an entirely new light. This paper was accepted by Yuval Rottenstreich, judgment and decision making </jats:p
Impact of rest-redistribution on fatigue during maximal eccentric knee extensions
Redistributing long inter-set rest intervals into shorter but more frequent rest intervals generally maintains concentric performance, possibly due to improved energy store maintenance. However, eccentric actions require less energy than concentric actions, meaning that shorter but more frequent sets may not affect eccentric actions to the same degree as concentric actions. Considering the increased popularity of eccentric exercise, the current study evaluated the effects of redistributing long inter-set rest periods into shorter but more frequent rest periods during eccentric only knee extensions. Eleven resistance-trained men performed 40 isokinetic unilateral knee extensions at 60°·s-1 with 285 s of total rest using traditional sets (TS; 4 sets of 10 with 95 s inter-set rest) and rest-redistribution (RR; 20 sets of 2 with 15 s inter-set rest). Before and during exercise, muscle oxygenation was measured via near-infrared spectroscopy, and rating of perceived exertion (RPE) was recorded after every 10th repetition. There were no differences between protocols for peak torque (RR, 241.58±47.20 N; TS, 231.64±48.87 N; p=0.396) or total work (RR, 215.26±41.47 J; TS, 209.71±36.02 J; p=0.601), but moderate to large effect sizes existed in later repetitions (6,8,10) with greater peak torque during RR (d=0.66-1.19). For the entire session, RR had moderate effects on RPE (RR, 5.73±1.42; TS, 6.09±1.30; p=0.307; d=0.53) and large effects on oxygen saturation (RR, 5857.4±310.0; TS, 6495.8±273.8; p=0.002, d=2.13). Therefore, RR may maintain peak torque or total work during eccentric exercise, improve oxygen utilization at the muscle, and reduce the perceived effort
S100B is not a reliable prognostic index in paediatric TBI.
Pediatr Neurosurg. 2007;43(4):258-64
- …