Dense Cranial Electroacupuncture Stimulation for Major Depressive Disorder—A Single-Blind, Randomized, Controlled Study

BACKGROUND: Previous studies suggest that electroacupuncture possesses therapeutic benefits for depressive disorders. The purpose of this study was to determine whether dense cranial electroacupuncture stimulation (DCEAS) could enhance the antidepressant efficacy in the early phase of selective serotonin reuptake inhibitor (SSRI) treatment of major depressive disorder (MDD). METHODS: In this single-blind, randomized, controlled study, patients with MDD were randomly assigned to 9-session DCEAS or noninvasive electroacupuncture (n-EA) control procedure in combination with fluoxetine (FLX) for 3 weeks. Clinical outcomes were measured using the 17-item Hamilton Depression Rating Scale (HAMD-17), Clinical Global Impression-severity (CGI-S), and Self-rating Depression Scale (SDS) as well as the response and remission rates. RESULTS: Seventy-three patients were randomly assigned to n-EA (n = 35) and DCEAS (n = 38), of whom 34 in n-EA and 36 in DCEAS group were analyzed. DCEAS-treated patients displayed a significantly greater reduction from baseline in HAMD-17 scores at Day 3 through Day 21 and in SDS scores at Day 3 and Day 21 compared to patients receiving n-EA. DCEAS intervention also produced a higher rate of clinically significant response compared to n-EA procedure (19.4% (7/36) vs. 8.8% (3/34)). The incidence of adverse events was similar in the two groups. CONCLUSIONS: DCEAS is a safe and effective intervention that augments the antidepressant efficacy. It can be considered as an additional therapy in the early phase of SSRI treatment of depressed patients. TRIAL REGISTRATION: Controlled-Trials.com ISRCTN88008690

An update on genomic-guided therapies for pediatric solid tumors

YesCurrently, out of the 82 US FDA-approved targeted therapies for adult cancer treatments, only three are approved for use in children irrespective of their genomic status. Apart from leukemia, only a handful of genomic-based trials involving children with solid tumors are ongoing. Emerging genomic data for pediatric solid tumors may facilitate the development of precision medicine in pediatric patients. Here, we provide an up-to-date review of all reported genomic aberrations in the eight most common pediatric solid tumors with whole-exome sequencing or whole-genome sequencing data (from cBioPortal database, Pediatric Cancer Genome Project, Therapeutically Applicable Research to Generate Effective Treatments) and additional non-whole-exome sequencing studies. Potential druggable events are highlighted and discussed so as to facilitate preclinical and clinical research in this area.Seed Grant of Strategic Research Theme for Cancer, The University of Hong Kong of AKSC. VWY Lui is funded by the Research Grant Council, Hong Kong (#17114814, #17121616, General Research Fund; T12–401/13-R, Theme-based Research Scheme), and the Start-up Fund, School of Biomedical Sciences, Faculty of Medicine, The Chinese University of Hong Kong. W Piao is funded by the Faculty Postdoctoral Fellowship Scheme, Faculty of Medicine, the Chinese University of Hong Kong

Effectiveness of BNT162b2 and CoronaVac vaccinations against mortality and severe complications after SARS-CoV-2 Omicron BA.2 infection: a case–control study

Data regarding protection against mortality and severe complications after Omicron BA.2 infection with CoronaVac and BNT162b2 vaccines remains limited. We conducted a case–control study to evaluate the risk of severe complications and mortality following 1–3 doses of CoronaVac and BNT162b2 using electronic health records database. Cases were adults with their first COVID-19-related mortality or severe complications between 1 January and 31 March 2022, matched with up-to 10 controls by age, sex, index date, and Charlson Comorbidity Index. Vaccine effectiveness against COVID-19-related mortality and severe complications by type and number of doses was estimated using conditional logistic regression adjusted for comorbidities and medications. Vaccine effectiveness (95% CI) against COVID-19-related mortality after two doses of BNT162b2 and CoronaVac were 90.7% (88.6–92.3) and 74.8% (72.5–76.9) in those aged ≥65, 87.6% (81.4–91.8) and 80.7% (72.8–86.3) in those aged 50–64, 86.6% (71.0–93.8) and 82.7% (56.5–93.1) in those aged 18–50. Vaccine effectiveness against severe complications after two doses of BNT162b2 and CoronaVac were 82.1% (74.6–87.3) and 58.9% (50.3–66.1) in those aged ≥65, 83.0% (69.6–90.5) and 67.1% (47.1–79.6) in those aged 50–64, 78.3% (60.8–88.0) and 77.8% (49.6–90.2) in those aged 18–50. Further risk reduction with the third dose was observed especially in those aged ≥65 years, with vaccine effectiveness of 98.0% (96.5–98.9) for BNT162b2 and 95.5% (93.7–96.8) for CoronaVac against mortality, 90.8% (83.4–94.9) and 88.0% (80.8–92.5) against severe complications. Both CoronaVac and BNT162b2 vaccination were effective against COVID-19-related mortality and severe complications amidst the Omicron BA.2 pandemic, and risks decreased further with the third dose

Robust estimation of bacterial cell count from optical density

Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data

Dominância fiscal : uma investigação empírica sobre o caso brasileiro no período de 2003 a 2014

A estabilização econômica dos anos de 1990 e a adoção do tripé econômico, a partir de 1999, marcam o fim de um capítulo delicado da história brasileira; a partir de então, era necessária a existência de certa sintonia de políticas monetária e fiscal para a manutenção do controle dos diversos indicadores econômicos. Contudo, com essa reciprocidade na política econômica, são incitadas discussões sobre a orientação do governo na hora de definir suas prioridades nesse campo: as variáveis fiscais são priorizadas e, por conseguinte, determinadas, forçando as monetárias a se ajustarem – ou o contrário? A resposta para esse questionamento leva à discussão sobre a dominância fiscal. Assim, esse trabalho visa verificar empiricamente, usando das modelagens econométricas VAR e estudo de eventos, se há dominância fiscal ou monetária na economia brasileira e se a eficácia da política monetária mudou na transição do governo Lula para o governo Dilma. O resultado foi inconclusivo para o governo Lula e indicou dominância fiscal no governo Dilma. Ainda verificou-se não haver modificação na eficácia da política monetária.Economic stabilization, in the 1990s, and utilization of an economic tripod, after 1999, represents the end of a delicate chapter in Brazilian history. Ever since, it was necessary the existence of a certain agreement between monetary and fiscal politic, in order to maintain under control a variety of economic indicators. However, this reciprocity (in economic politic) starts discussions about the real government orientations when it comes to define its priority on this subject: are the fiscal variables priorized, and then, determined, forcing monetary variables to adjust themselves, or the opposite? The answer to these questions emerge from the fiscal dominance discussion. This paper intends to empiric verify, using econometric modeling VAR and event study, if there is fiscal dominance or monetary in Brazilian economy and whether the effectiveness of monetary politic has changed in the transition from Lula's government to the Dilma government. The result was inconclusive for the Lula government and indicated fiscal dominance in the Dilma government. There was still no change in the efficiency of the monetary politic.CAPE

Identification and characterisation of genes over-expressed in gastricadenocarcinomas

published_or_final_versionPathologyMasterMaster of Philosoph

4D direct laser writing of photo-triggered liquid crystal elastomer microactuators with large actuation strain

4D printed photo-triggered liquid crystal elastomers (LCEs) microactuators by direct laser writing via two-photon polymerization (DLW-TPP) have attracted increasing attention due to their manipulation flexibility, reversible and rapid actuation capabilities. However, their development is hampered by the lack of room-temperature printable liquid crystal (LC) photoresists. Here, we developed new light-responsive LC photoresists by incorporating novel conjugated polymers (CPs) as photothermal agents for the DLW-TPP technology. The CPs displayed a remarkable photothermal effect and effectively avoided the aggregation problems that always happened for inorganic nanoparticles in photoresists. Moreover, the CPs incorporation lowered the nematic-to-isotropic temperature of the LC photoresists which is beneficial for room-temperature DLW-TPP. The printing parameters, including laser power and scanning speed, were investigated using the developed LC photoresists. It was found the range of printing parameters decreased with the increase of the CPs loading fraction from 0.1 to 0.5 wt%, which was attributed to the high photothermal conversion efficiency (52.7%). A well-defined CPs/LCEs microactuator with CPs as low as 0.3 wt% was printed, which could achieve a large 25.0% actuation strain in 5 s upon near-infrared (NIR) light stimulation. It could be used for thriving soft micro-robotics and micro-membranes with controllable separation capabilities

Nanotechnology of diamondoids for the fabrication of nanostructured systems

Diamondoids are cage-like hydrocarbon materials with unique characteristics such as low dielectric constants, negative electron affinity, large steric bulk, and electron-donating ability. They are widely used for advanced functional materials in nanocomposite science. Surface modification of diamondoids also produces functional derivatives that broaden its applications. This article provides a concise review of the fundamentals of diamondoids, including their origin and functionalization, electronic structure, optical properties, and vibrational characteristics. The recent advances of diamondoids and their derivatives in applications, such as nanocomposites and thin film coatings, are presented. The fabrication of diamondoid-based nanostructured devices, including electron emitters, catalyst sensors, and light-emitting diodes, are also reviewed. Finally, the future developments of this unique class of hydrocarbon materials in producing a novel nanostructure system using advanced nanotechnologies are discussed. This review is intended to provide a basic understanding of diamondoid properties, discuss the recent progress of its modifications and functionalization, and highlight its novel applications and future prospects

Printability of photo-sensitive nanocomposites using two-photon polymerization

Two-photon polymerization direct laser writing (TPP DLW) is an emerging technology for producing advanced functional devices with complex three-dimensional (3D) micro-structures. Tremendous efforts have been devoted to developing two-photon polymerizable photo-sensitive nanocomposites with tailored properties. Light-induced reconfigurable smart materials such as liquid crystalline elastomers (LCEs) are promising materials. However, due to the difficulties in designing two-photon polymerizable liquid crystal monomer (LCM) nanocomposite photoresists, it is challenging to fabricate true 3D LCE micro-structures. In this paper, we report the preparation of photo-sensitive LCE nanocomposites containing photothermal nanomaterials, including multiwalled carbon nanotubes, graphene oxide and gold nanorods (AuNRs), for TPP DLW. The printability of the LCE nanocomposites is assessed by the fidelity of the micro-structures under different laser writing conditions. DLW of GO/LCM photoresist has shown a vigorous bubble formation. This may be due to the excessive heat generation upon rapid energy absorption of 780 nm laser energy. Compared to pure LCM photoresists, AuNR/LCM photoresists have a lower laser intensity threshold and higher critical laser scanning speed, due to the high absorption of AuNRs at 780 nm, which enhanced the photo-sensitivity of the photoresist. Therefore, a shorter printing time can be achieved for the AuNR/LCM photoresist