993 research outputs found

    Silicon nitride powder

    Get PDF
    The characteristics and preparation methods of Si3N4 are reviewed. Special emphasis is placed on the correlation between impurities and strength of sintered Si3N4

    Effect of ammonium bisulphite and chloride on the pitting and stress corrosion cracking resistance of super duplex stainless steel pipes under combined internal pressure and axial tension

    Get PDF
    The financial support of Shell UK is acknowledged. The authors would like to thank the following technical staff, Stuart Herbert, Alistair Robertson for the machining of the mini pipes, Derek Logan, and Irene Brand for resolving several electrical issues and providing accessories, and Jim Gall for help with the test set‐up and prompt supply of tools and equipment.Peer reviewedPostprin

    Treatment of giant congenital melanocytic nevi with cultured epithelial autografts: Clinical and histopathological analysis

    Get PDF
    [Introduction] Curettage and dermabrasion are effective in the treatment of giant congenital melanocytic nevi (GCMN); however, local infection and hypertrophic scar formation are major issues. Thus, we applied cultured epithelial autografts (CEA) on skin defects after curettage or abrasion of GCMN and assessed the postoperative outcomes. [Methods] Seven nevi lesions of five patients (aged 3 months to 24 years) were treated with CEA after curettage or abrasion with a dermatome or a surgical bar, respectively. We assessed the postoperative outcomes, including CEA take ratio, erosion and/or ulcer formation in the acute phase, hospitalization days, Vancouver scar scale, and color improvement one year after the operation. In addition, a histological evaluation of a skin biopsy was performed over one year after the operation. [Results] The CEAs took well on the wound, and the wound surface was mostly epithelized by postoperative day 7 in all cases. While hypertrophic scar formation and slight pigmentation were observed in some lesions, the color was improved in all of the treated lesions. Histopathological examination revealed that the regenerated epidermis had stratified keratinocytes with rete ridges, and the dermal layer without nevus cells regenerated above the remaining dermis layer. [Conclusions] In this study, we found that early epithelialization and regeneration of the dermal layer was achieved after the application of CEA, suggesting that CEA could be an effective option after curettage or abrasion of GCMN

    Isotope effect on the transition temperature TcT_c in Fe-based superconductors: the current status

    Full text link
    The results of the Fe isotope effect (Fe-IE) on the transition temperature TcT_c obtained up to date in various Fe-based high temperature superconductors are summarized and reanalyzed by following the approach developed in [Phys. Rev. B 82, 212505 (2010)]. It is demonstrated that the very controversial results for Fe-IE on TcT_c are caused by small structural changes occurring simultaneously with the Fe isotope exchange. The Fe-IE exponent on TcT_c [αFe=(ΔTc/Tc)/(ΔM/M)\alpha_{\rm Fe}=-(\Delta T_c/T_c)/(\Delta M/M), MM is the isotope mass] needs to be decomposed into two components with the one related to the structural changes (αFestr\alpha_{\rm Fe}^{\rm str}) and the genuine (intrinsic) one (αFeint\alpha_{\rm Fe}^{\rm int}). The validity of such decomposition is further confirmed by the fact that αFeint\alpha_{\rm Fe}^{\rm int} coincides with the Fe-IE exponent on the characteristic phonon frequencies αFeph\alpha_{\rm Fe}^{\rm ph} as is reported in recent EXAFS and Raman experiments.Comment: 7 pages, 4 figures. The paper is partially based on the results published in [New J. Phys. 12, 073024 (2010) = arXiv:1002.2510] and [Phys. Rev. B 82, 212505 (2010) = arXiv:1008.4540

    Bubbling in a co-flow at high Reynolds numbers

    Get PDF
    The physical mechanisms underlying bubble formation from a needle in a co-flowing liquid environment at high Reynolds numbers are studied in detail with the aid of experiments and boundary-integral numerical simulations. To determine the effect of gas inertia the experiments were carried out with air and helium. The influence of the injection system is elucidated by performing experiments using two different facilities, one where the constancy of the gas flow-rate entering the bubble is ensured, and another one where the gas is injected through a needle directly connected to a pressurized chamber. In the case of constant flow-rate injection conditions, the bubbling frequency has been shown to hardly depend on the gas density, with a bubble size given by db / ro  ? 6U? K * U + k2 /? U- 1? 1/3 for U? 2, where U is the gas-to-liquid ratio of the mean velocities, ro is the radius of the gas injection needle, and k * = 5,84 and k2 = 4,29, whit db / ro3,3U1 / 3 for U1.. Nevertheless, in this case the effect of gas density is relevant to describe the final instants of bubble breakup, which take place at a time scale much smaller than the bubbling time, tb. This effect is evidenced by the liquid jets penetrating the gas bubbles upon their pinch-off. Our measurements indicate that the velocity of the penetrating jets is considerably larger in air bubbles than in helium bubbles due to the distinct gas inertia of both situations. However, in the case of constant pressure supply conditions, the bubble size strongly depends on the density of the gas through the pressure loss along the gas injection needle. Furthermore, under the operating conditions reported here, the equivalent diameters of the bubbles are between 10% and 20% larger than their constant flow-rate counterparts. In addition, the experiments and the numerical results show that, under constant pressure supply, helium bubbles are approximately 10% larger than air bubbles due to the gas density effect on the bubbling process

    ALMA CO Observations of Supernova Remnant N63A in the Large Magellanic Cloud: Discovery of Dense Molecular Clouds Embedded within Shock-Ionized and Photoionized Nebulae

    Full text link
    We carried out new 12^{12}CO(JJ = 1-0, 3-2) observations of a N63A supernova remnant (SNR) from the LMC using ALMA and ASTE. We find three giant molecular clouds toward the northeast, east, and near the center of the SNR. Using the ALMA data, we spatially resolved clumpy molecular clouds embedded within the optical nebulae in both the shock-ionized and photoionized lobes discovered by previous Hα\alpha and [S II] observations. The total mass of the molecular clouds is \sim800800 MM_{\odot} for the shock-ionized region and \sim17001700 MM_{\odot} for the photoionized region. Spatially resolved X-ray spectroscopy reveals that the absorbing column densities toward the molecular clouds are \sim1.51.5-6.0×10216.0\times10^{21} cm2^{-2}, which are \sim1.51.5-1515 times less than the averaged interstellar proton column densities for each region. This means that the X-rays are produced not only behind the molecular clouds, but also in front of them. We conclude that the dense molecular clouds have been completely engulfed by the shock waves, but have still survived erosion owing to their high-density and short interacting time. The X-ray spectrum toward the gas clumps is well explained by an absorbed power-law or high-temperature plasma models in addition to the thermal plasma components, implying that the shock-cloud interaction is efficiently working for both the cases through the shock ionization and magnetic field amplification. If the hadronic gamma-ray is dominant in the GeV band, the total energy of cosmic-ray protons is calculated to be \sim0.30.3-1.4×10491.4\times10^{49} erg with the estimated ISM proton density of \sim190±90190\pm90 cm3^{-3}, containing both the shock-ionized gas and neutral atomic hydrogen.Comment: 18 pages, 4 tables, 8 figures, accepted for publication in The Astrophysical Journal (ApJ

    A Versatile cascade of intramolecular vilsmeier-haack and azomethine ylide 1,3-dipolar cycloaddition toward tricyclic cores of alkaloids

    Get PDF
    Abstract: In the pursuit of synthetic efficiency, we developed an innovative one-pot transformation of linear substrates into bi- and tricyclic adducts using a cascade of amide activation, nucleophilic cyclization, azomethine ylide generation, and subsequent inter- or intramolecular 1,3-dipolar cycloaddition. Despite the high density and variety of functional groups on the substrates, the sequence occurred with perfect chemoselectivity with good to excellent yields

    Molecular Clouds associated with the Type Ia SNR N103B in the Large Magellanic Cloud

    Full text link
    N103B is a Type Ia supernova remnant (SNR) in the Large Magellanic Cloud (LMC). We carried out new 12^{12}CO(JJ = 3-2) and 12^{12}CO(JJ = 1-0) observations using ASTE and ALMA. We have confirmed the existence of a giant molecular cloud (GMC) at VLSRV_\mathrm{LSR} \sim245 km s1^{-1} towards the southeast of the SNR using ASTE 12^{12}CO(JJ = 3-2) data at an angular resolution of \sim25"" (\sim6 pc in the LMC). Using the ALMA 12^{12}CO(JJ = 1-0) data, we have spatially resolved CO clouds along the southeastern edge of the SNR with an angular resolution of \sim1.8"" (\sim0.4 pc in the LMC). The molecular clouds show an expanding gas motion in the position-velocity diagram with an expansion velocity of 5\sim5 km s1^{-1}. The spatial extent of the expanding shell is roughly similar to that of the SNR. We also find tiny molecular clumps in the directions of optical nebula knots. We present a possible scenario that N103B exploded in the wind-bubble formed by the accretion winds from the progenitor system, and is now interacting with the dense gas wall. This is consistent with a single-degenerate scenario.Comment: 12 pages, 1 table, 8 figures, accepted for publication in The Astrophysical Journal (ApJ
    corecore