Ion Trap Mass Spectrometers for Identity, Abundance and Behavior of Volatiles on the Moon

NASA GSFC and The Open University (UK) are collaborating to deploy an Ion Trap Mass Spectrometer on the Moon to investigate the lunar water cycle. The ITMS is flight-proven throughthe Rosetta Philae comet lander mission. It is also being developed under ESA funding to analyse samples drilled from beneath the lunar surface on the Roscosmos Luna-27 lander (2025).Now, GSFC and OU will now develop a compact ITMS instrument to study the near-surface lunar exosphere on board a CLPS Astrobotic lander at Lacus Mortis in 2021

Value of team approach combined with clinical pathway for diabetic foot problems: a clinical evaluation

Aims: To evaluate the effectiveness of management of diabetic foot problems (DFP) by the National University Hospital (NUH) Multidisciplinary Diabetic Foot Team combined with a clinical pathway in terms of average length of stay (ALOS), readmission rates, hospitalisation cost per patient, major reamputation rate, and complication rate. Methods: 939 patients admitted to the Department of Orthopaedic Surgery, NUH, for DFP from 2002 (before team formation) to 2007 (after team formation). It consisted of six cohorts of patients – 61 for 2002, 70 for 2003, 148 for 2004, 180 for 2005, 262 for 2006, and 218 for 2007. All patients were managed by the NUH Multidisciplinary Diabetic Foot Team combined with a clinical pathway. Statistical analyses were carried out for five parameters (ALOS, hospitalisation cost per patient, major amputation rate, readmission rate, and complication rate). Results: From 2002 to 2007, the ALOS was significantly reduced from 20.36 days to 12.20 days (p=0.0005). Major amputation rate was significantly reduced from 31.15 to 11.01% (p<0.0005). There was also a significant reduction in complication rate from 19.67 to 7.34% (p=0.005). There were reductions in the hospitalisation cost per patient and readmission rate after formation of the multidisciplinary team but they were not statistically significant. Conclusion: Our evaluation showed that a multidisciplinary team approach combined with the implementation of a clinical pathway in NUH was effective in reducing the ALOS, major amputation rate, and complication rate of DFP

Novel specular meteor radar systems using coherent MIMO techniques to study the mesosphere and lower thermosphere

Typical specular meteor radars (SMRs) use one transmitting antenna and at least a five-antenna interferometric configuration on reception to study the mesosphere and lower thermosphere (MLT) region. The interferometric configuration allows the measurement of the angle-of-arrival (AOA) of the detected meteor echoes, which in turn is needed to derive atmospheric parameters (e.g., mean winds, momentum fluxes, temperatures, and neutral densities). Recently, we have shown that coherent MIMO configurations in atmospheric radars, i.e., multiple input (transmitters) and multiple output (receivers), with proper diversity in transmission can be used to enhance interferometric atmospheric and ionospheric observations. In this study we present novel SMR systems using multiple transmitters in interferometric configuration, each of them employing orthogonal pseudorandom coded transmitted sequences. After proper decoding, the angle of departure (AOD) of the detected meteor echoes with respect to the transmitter site are obtained at each receiving antenna. We present successful bistatic implementations of (1) five transmitters and one receiver using coded continuous wave (CW) (MISO-CW), and (2) five transmitters and five receivers using coded CW (MIMO-CW). The latter system allows simultaneous independent observations of the specular meteor trails with respect to the transmitter (AOD) and with respect to the receiver (AOA). The quality of the obtained results is evaluated in terms of the resulting mean winds, the number of detections and the daily diffusion trail vs. altitude behavior. We show that the proposed configurations are good alternatives to explore the MLT region. When combined with multi-static approaches, they can increase the number of meteor detections, thereby improving the quality of atmospheric estimates and allowing the measurement of new atmospheric parameters (e.g., horizontal divergence, vorticity), The use of multiple collocated transmitters for interferometric AOD determination makes building a multi-static radar network easier logistically, as only one receiver per receiving site antenna is sufficient.</p

Design of a Nuclear-Powered Rover for Lunar or Martian Exploration

To perform more advanced studies on the surface of the moon or Mars, a rover must provide long-term power ({ge}10 kW{sub e}). However, a majority of rovers in the past have been designed for much lower power levels (i.e., on the order of watts) or for shorter operating periods using stored power. Thus, more advanced systems are required to generate additional power. One possible design for a more highly powered rover involves using a nuclear reactor to supply energy to the rover and material from the surface of the moon or Mars to shield the electronics from high neutron fluxes and gamma doses. Typically, one of the main disadvantages of using a nuclear-powered rover is that the required shielding would be heavy and expensive to include as part of the payload on a mission. Obtaining most of the required shielding material from the surface of the moon or Mars would reduce the cost of the mission and still provide the necessary power. This paper describes the basic design of a rover that uses the Heatpipe Power System (HPS) as an energy source, including the shielding and reactor control issues associated with the design. It also discusses briefly the amount of power that can be produced by other power methods (solar/photovoltaic cells, radioisotope power supplies, dynamic radioisotope power systems, and the production of methane or acetylene fuel from the surface of Mars) as a comparison to the HPS

CLIC: a Two-Beam Multi-TeV e±e\pm Linear Collider

The CLIC study of a high-energy (0.5 - 5 TeV), high-luminosity (1034 - 1035 cm-2 sec-1) e+e- linear collider is presented. Beam acceleration using high frequency (30 GHz) normal-conducting structures operating at high accelerating fields (150 MV/m) significantly reduces the length and, in consequence, the cost of the linac. Using parameters derived from general scaling laws for linear colliders, the beam stability is shown to be similar to lower frequency designs in spite of the strong wake-field dependency on frequency. A new cost-effective and efficient drive beam generation scheme for RF power production by the so-called "Two-Beam Acceleration" method is described. It uses a thermionic gun and a fully-loaded normal-conducting linac operating at low frequency (937 MHz) to generate and accelerate the drive beam bunches, and RF multiplication by funnelling in compressor rings to produce the desired bunch structure. Recent 30 GHz hardware developments and CLIC Test Facility (CTF) results are described