331 research outputs found
Simulating Low-Level Laser Propagation From Skin Surface to Lumbar Disc, Knee, Femur and Prostate Gland By Monte Carlo Method
Nowadays, the uses of laser and optics in the medical areas are extremely vivid, especially low-level laser therapy. The light with the wavelength of 633 nm to 1200 nm could penetrate and propagate deep in biological tissue. To develop the low-level laser therapy device, optimizing light delivery is critical to accurately stimulate the biological effects inside the biological tissue. Nevertheless, each form of the tissues at each zone on the body had various refractive optic, absorption, scattering, and anisotropy coefficients. This paper describes the simulation results of low-level laser propagation from skin surface at the lower spine, the knee, the femur and the prostate gland with four wavelengths (633 nm, 780 nm, 850 nm, and 940 nm) by the Monte Carlo method. These simulation results are the base for developing the low-level laser therapy device, that could be used in clinical for treating the fracture, knee osteoarthritis, spinal degeneration, and benign prostatic hypertrophy
Students' procedures for reviewing lecture notes
Teacher education students were questioned about the purposes they established for use of lecture notes and their use of lecture notes was observed following the presentation of a short lecture. The students also completed a test on the lecture material. The purposes students established for their lecture notes covered a wide range of study and practical tasks. Notes were reported to be most commonly used for essay writing, which was the most common form of assessment for these students. The most frequent strategy students used for reviewing of lecture notes was some form of repetition. Less common was the use of complex elaborative procedures that involved generation of links among different components of the lecture notes, or between the new material and the students' existing knowledge. Concerns are raised about the state of the students' metacognitive knowledge about lecture-note review and about the need to include such knowledge in university courses
奥行きデータの推定とその応用に関する研究
Three dimensional video ( 3DV ) and multi-view imaging technologies may be the next step in the evolution of motion picture formats, as we presently witness the appearance of 3D displays, multicamera systems with dense or sparse camera configuration, coding systems. Going with the demand of entertainment and progressive development of digital devices, developing 3D processing algorithms, related applications and systems have been attracted extensive attentions in the industrial and research communities. Depth inference from stereo and multi-view images is one of the most fundamental techniques in 3D digital imaging applications since it provides the perception and visualization of the real word environment in 3DV as well as a useful cue for other applications. This thesis devotes to firstly study depth estimation from multi-view images and then use this useful information for three applications including: one of the key applications in 3DTV namely free viewpoint synthesis, and other two applications object segmentation and multiple moving object tracking.……広島大学(Hiroshima University)博士(工学)Engineeringdoctora
Dealing With Non-Performing Loans During The Bank Restructuring Process in Vietnam: Assessment Using The AHP and TOPSIS Methods
This article aims to assess the solutions that have been implemented in Vietnam to deal with non-performing loan(s) (NPLs) in the banking system. By trying to build evaluation criteria through a literature review and an expert survey, as well as using the analytic hierarchy process (AHP) and technique for order preference by similarity to ideal solution (TOPSIS), this research measures the effectiveness of the resolution of NPLs in Vietnam through many factors. The empirical results show that, in the past, the banking system in Vietnam has not dealt very well with bad debt, as it mostly uses traditional methods such as NPL write-offs by loan loss reserves or the liquidation of collateral. Based on our consideration of the NPLs’ resolutions that the Vietnamese banking system has implemented recently, we propose some suggestions to improve the necessary conditions for applying more market-based solutions, such as debt-equity swaps and securitization to thoroughly resolve the NPLs in Vietna
The Relationship between Budget Revenue - expenditure and Inflation in Vietnam: Viewed from the Results of Quantitative Analysis
The research examines the relationship between budget revenue expenditure and inflation in Vietnam, with time series data on budget revenue expenditure and the consumer price index (CPI) (representing the inflation variable in Vietnam). Data were collected from the International Financial Statistics (IFS-IMF), General Statistics Office (GSO) in the period of 2005-2022. The author used Eview software to build a linear relationship log-log of budget revenue - -expenditure and CPI in the case of the Vietnamese economy. Quantitative analysis results show that when budget revenue increased by 1%, CPI increased by 0.249674%, when budget expenditure increased by 1%, CPI increased by 0.298316%. Raising budget revenue to raise budget expenditure will result in higher inflation during the research period in Vietnam. From the theoretical basis, research overview, and quantitative analysis results, the research team makes some recommendations for fiscal policy in Vietnam in the current context
Synergic Effect of CaI and LiI on Ionic Conductivity of Solution-Based Synthesized Li7P3S11 Solid Electrolyte
Li7P3S11 doped with CaX2 (X = Cl, Br, I) and LiI solid electrolytes were successfully prepared by liquid-phase synthesis using acetonitrile as the reaction medium. Their structure was investigated using XRD, Raman spectroscopy and SEM-EDS. The data obtained from complex impedance spectroscopy was analyzed to study the ionic conductivity and relaxation dynamics in the prepared samples. The XRD results suggested that a part of CaX2 and LiI incorporated into the structure of Li7P3S11, while the remaining part existed at the grain boundary of the Li7P3S11 particle. The Raman peak positions of PS43- and P2S74- ions in samples 90Li7P3S11-5CaI2 and 90Li7P3S11-5CaI2-5LiI had shifted as compared to the Li7P3S11 sample, showing that CaI2 addition affected the vibration of PS43- and P2S74- ions. EDS results indicated that CaI2 and LiI were well dispersed in the prepared powder sample. The ionic conductivity at 25 °C of sample 90Li7P3S11-5CaI2-5LiI reached a very high value of 3.1 mS cm-1 due to the improvement of Li-ion movement at the grain boundary and structural improvement upon CaI2 and LiI doping. This study encouraged the application of Li7P3S11 in all-solid-state Li-ion batteries
VIBRATION ANALYSIS OF CROSS-PLY LAMINATED COMPOSITE DOUBLY CURVED SHALLOW SHELL PANELS WITH STIFFENERS
In this paper, the analytical solution for the cross-ply laminated composite double curved shell panels with stiffeners is presented. Based on the smeared stiffeners technique and the first shear deformation theory (FSDT), the motion equations are derived by applying the Hamilton’s principle. The Navier’s solution for the simply supported boundary condition for all edges is presented. The numerical results are verified with the known results in the literature. The effects of the number of stiffeners, dimensions of stiffeners, and lamination scheme of cross-ply laminated composite doubly curved shell panels on the natural fundamental frequencies are investigated
CHARACTERIZATION OF CARBONATED STEELMAKING SLAG AND ITS POTENTIAL APPLICATION IN CONSTRUCTION
In the current context of Vietnam, the solid waste of steel slag occupy ground for dumping and lead to severe environmental issue due to their high content of heavy metal and fine dust. For the purpose of large-scale recycling steel slag, up to now one of the most relevant solutions is to use as aggregate for asphaltic and/or cement concrete. In this paper, we aim to analyze the influence of the accelerated carbonation condition in the laboratory on the physio-chemical properties of carbonated steel slag. Materials composition were characterized by using different analysis techniques of XRD, SEM, TG and others measurement of the physio-properties (density, L.O.I..) were also realized with regards to the requirement of the national standard for concrete aggregate. In conclusion, we will discuss the effect of reaction condition and on the feasibility of implementing this specific treatment method on a larger scale.Keywords: steelmaking slag, solid waste, CO2 sequestration, accelerated carbonation, concrete aggregate
- …