22 research outputs found

    Extinction efficiencies of coated absorbing aerosols measured by cavity ring down aerosol spectrometry

    No full text
    International audienceIn this study, we measure the extinction efficiency at 532 nm of absorbing aerosol particles coated with a non-absorbing solid and liquid organic shell with coating thickness varying between 5 and 100 nm using cavity ring down aerosol spectrometry. For this purpose, we use nigrosin, an organic black dye, as a model absorbing core and two non-absorbing organic substances as shells, glutaric acid (GA) and Di-Ethyl-Hexyl-Sebacate (DEHS). The measured behavior of the coated particles is consistent with Mie calculations of core-shell particles. Errors between measured and calculated values for nigrosin coated with GA and DEHS are between 0.5% and 10.5% and between 0.5% and 9%, respectively. However, it is evident that the calculations are in better agreement with the measured results for thinner coatings. Possible reasons for these discrepancies are discussed

    Tara Pacific Expedition\u27s atmospheric measurements of marine aerosols across the Atlantic and Pacific Oceans: Overview and preliminary results

    Get PDF
    Marine aerosols play a significant role in the global radiative budget, in clouds\u27 processes, and in the chemistry of the marine atmosphere. There is a critical need to better understand their production mechanisms, composition, chemical properties, and the contribution of ocean-derived biogenic matter to their mass and number concentration. Here we present an overview of a new dataset of in situ measurements of marine aerosols conducted over the 2.5-yr Tara Pacific Expedition over 110, 000 km across the Atlantic and Pacific Oceans. Preliminary results are presented here to describe the new dataset that will be built using this novel set of measurements. It will characterize marine aerosols properties in detail and will open a new window to study the marine aerosol link to the water properties and environmental conditions

    Phys. Chem. Chem. Phys.

    No full text

    The optical, physical and chemical properties of the products of glyoxal uptake on ammonium sulfate seed aerosols

    No full text
    The heterogeneous reaction between gas phase glyoxal and ammonium sulfate (AS) aerosols, a proxy for inorganic atmospheric aerosol, was studied in terms of the dependence of the optical, physical and chemical properties of the product aerosols on initial particle size and ambient relative humidity (RH). Our experiments imitate an atmospheric scenario of a dry particle hydration at ambient RH conditions in the presence of glyoxal gas followed by efflorescence due to decrease of the ambient RH. The reactions were studied under different RH conditions, starting from dry conditions (~20% RH) and up to 90% RH, covering conditions prevalent in many atmospheric environments, and followed by consequent drying of the reacted particles before their analysis by the aerosol mass spectrometer (AMS), cavity ring down (CRD) and scanning mobility particle sizer (SMPS) systems. At λ = 355 nm, the reacted aerosols demonstrate a substantial growth in optical extinction cross section, as well as in mobility diameter under a broad range of RH values (35–90%). The ratio of the product aerosol to seed aerosol geometric cross section reached up to ~3.5, and the optical extinction cross-section up to ~250. The reactions show a trend of increasing physical and optical growth with decreasing seed aerosol size, from 100 nm to 300 nm, as well as with decreasing RH values from 90% to ~40%. Optically inactive aerosols, at the limit of the Mie range (100 nm diameter) become optically active as they grow due to the reaction. AMS analyses of the reaction of 300 nm AS at RH values of 50%, 75% and 90% show that the main products of the reaction are glyoxal oligomers, formed by acetal formation in the presence of AS. In addition, imidazole formation, which is a minor channel, is observed for all reactions, yielding a product which absorbs at λ = 290 nm, with possible implications on the radiative properties of the product aerosols. The ratio of absorbing substances (C-N compounds, including imidazoles) increases with increasing RH value. A core/shell model used for the investigation of the optical properties of the reaction products of AS with gas phase glyoxal, shows that the refractive index (RI) of the reaction products are <i>n</i>= 1.68(±0.10)+0.01(±0.02) at 50% RH and <i>n</i> = 1.65(±0.06)+0.02(±0.01) at 75% RH at 355 nm. The observed increase in the ratio of the absorbing substances is not indicated in the imaginary part of the products at RH 50% and 75%. A further increase in the ratio of absorbing substances and a resulting increase in the imaginary part of the RI at higher RH values is expected, and may become even more substantial after longer reaction times, possibly in cloud or fog droplets. This study shows that the reaction of abundant substances present in atmospheric aerosols, such as AS, and gas phase glyoxal alters the aerosols' optical, physical and chemical properties and may have implications on the radiative effect of these aerosols

    Validation of urban NO<sub>2</sub> concentrations and their diurnal and seasonal variations observed from the SCIAMACHY and OMI sensors using in situ surface measurements in Israeli cities

    No full text
    We compare a full-year (2006) record of surface air NO2 concentrations measured in Israeli cities to coinciding retrievals of tropospheric NO2 columns from satellite sensors (SCIAMACHY aboard ENVISAT and OMI aboard Aura). This provides a large statistical data set for validation of NO2 satellite measurements in urban air, where validation is difficult yet crucial for using these measurements to infer NOx emissions by inverse modeling. Assuming that NO2 is well-mixed throughout the boundary layer (BL), and using observed average seasonal boundary layer heights, near-surface NO2 concentrations are converted into BL NO2 columns. The agreement between OMI and (13:45) BL NO2 columns (slope=0.93, n=542), and the comparable results at 10:00 h for SCIAMACHY, allow a validation of the seasonal, weekly, and diurnal cycles in satellite-derived NO2. OMI and BL NO2 columns show consistent seasonal cycles (winter NO2 1.6–2.7&times; higher than summer). BL and coinciding OMI columns both show a strong weekly cycle with 45–50% smaller NO2 columns on Saturday relative to the weekday mean, reflecting the reduced weekend activity, and validating the weekly cycle observed from space. The diurnal difference between SCIAMACHY (10:00) and OMI (13:45) NO2 is maximum in summer when SCIAMACHY is up to 40% higher than OMI, and minimum in winter when OMI slightly exceeds SCIAMACHY. A similar seasonal variation in the diurnal difference is found in the source region of Cairo. The surface measurements in Israel cities confirm this seasonal variation in the diurnal cycle. Using simulations from a global 3-D chemical transport model (GEOS-Chem), we show that this seasonal cycle can be explained by a much stronger photochemical loss of NO2 in summer than in winter
    corecore