The COOLER Code:A Novel Analytical Approach to Calculate Subcellular Energy Deposition by Internal Electron Emitters

COmputation of Local Electron Release (COOLER), a software program designed for dosimetry assessment at the cellular/subcellular scale, with a given distribution of administered low-energy electron-emitting radionuclides in cellular compartments, which remains a critical step in risk/benefit analysis for advancements in internal radiotherapy. The software is intended to overcome the main limitations of the medical internal radiation dose (MIRD) formalism for calculations of cellular S-values (i.e., dose to a target region in the cell per decay in a given source region), namely, the use of the continuous slowing down approximation (CSDA) and the assumption of a spherical cell geometry. To this aim, we developed an analytical approach, entrusted to a MATLAB-based program, using as input simulated data for electron spatial energy deposition directly derived from full Monte Carlo track structure calculations with PARTRAC. Results from PARTRAC calculations on electron range, stopping power and residual energy versus traveled distance curves are presented and, when useful for implementation in COOLER, analytical fit functions are given. Example configurations for cells in different culture conditions (V79 cells in suspension or adherent culture) with realistic geometrical parameters are implemented for use in the tool. Finally, cellular S-value predictions by the newly developed code are presented for different cellular geometries and activity distributions (uniform activity in the nucleus, in the entire cell or on the cell surface), validated against full Monte Carlo calculations with PARTRAC, and compared to MIRD standards, as well as results based on different track structure calculations (Geant4-DNA). The largest discrepancies between COOLER and MIRD predictions were generally found for electrons between 25 and 30 keV, where the magnitude of disagreement in S-values can vary from 50 to 100%, depending on the activity distribution. In calculations for activity distribution on the cell surface, MIRD predictions appeared to fail the most. The proposed method is suitable for Auger-cascade electrons, but can be extended to any energy of interest and to beta spectra; as an example, the (3)H case is also discussed. COOLER is intended to be accessible to everyone (preclinical and clinical researchers included), and may provide important information for the selection of radionuclides, the interpretation of radiobiological or preclinical results, and the general establishment of doses in any scenario, e.g., with cultured cells in the laboratory or with therapeutic or diagnostic applications. The software will be made available for download from the DTU-Nutech website: http://www.nutech.dtu.dk/

Lack of Bystander Effects From High LET Radiation For Early Cytogenetic Endpoints.

The aim of this work was to study radiation-induced bystander effects for early cytogenetic end points in various cell lines using the medium transfer technique after exposure to high- and low-LET radiation. Cells were exposed to 20 MeV/ nucleon nitrogen ions, 968 MeV/nucleon iron ions, or 575 MeV/nucleon iron ions followed by transfer of the conditioned medium from the irradiated cells to unirradiated test cells. The effects studied included DNA double-strand break induction, {gamma}-H2AX focus formation, induction of chromatid breaks in prematurely condensed chromosomes, and micronucleus formation using DNA repair-proficient and -deficient hamster and human cell lines (xrs6, V79, SW48, MO59K and MO59J). Cell survival was also measured in SW48 bystander cells using X rays. Although it was occasionally possible to detect an increase in chromatid break levels using nitrogen ions and to see a higher number of {gamma}-H2AX foci using nitrogen and iron ions in xrs6 bystander cells in single experiments, the results were not reproducible. After we pooled all the data, we could not verify a significant bystander effect for any of these end points. Also, we did not detect a significant bystander effect for DSB induction or micronucleus formation in these cell lines or for clonogenic survival in SW48 cells. The data suggest that DNA damage and cytogenetic changes are not induced in bystander cells. In contrast, data in the literature show pronounced bystander effects in a variety of cell lines, including clonogenic survival in SW48 cells and induction of chromatid breaks and micronuclei in hamster cells. To reconcile these conflicting data, it is possible that the epigenetic status of the specific cell line or the precise culture conditions and medium supplements, such as serum, may be critical for inducing bystander effects

Relative Biological Effectiveness of HZE Fe Ions for Induction of Micro-Nuclei at Low Doses

Dose-response curves for induction of micro-nuclei (MN) was measured in Chinese hamster V79 and xrs6 (Ku80-) cells and in human mammary epithelial MCF10A cells in the dose range of 0.05-1 Gy. The Chinese Hamster cells were exposed to 1 GeV/u Fe ions, 600 MeV/u Fe ions, and 300 MeV/u Fe ions (LETs of 151, 176 and 235 keV/{micro}m respectively) as well as with 320 kVp X-rays as reference. Second-order polynomials were fitted to the induction curves and the initial slopes (the alpha values) were used to calculate RBE. For the repair proficient V79 cells the RBE at these low doses increased with LET. The values obtained were 3.1 (LET=151 keV/{micro}m), 4.3 (LET = 176 keV/{micro}m) and 5.7 (LET = 235 keV/{micro}m), while the RBE was close to 1 for the repair deficient xrs6 cells regardless of LET. For the MCF10A cells the RBE was determined for 1 GeV/u Fe ions and found to be 5.4, slightly higher than for V79 cells. To test the effect of shielding, the 1 GeV/u Fe ion beam was intercepted by various thickness of high-density polyethylene plastic absorbers, which resulted in energy loss and fragmentation. It was found that the MN yield for V79 cells placed behind the absorbers decreased in proportion to the decrease in dose both before and after the Fe ion Bragg peak (excluding the area around the Fe-ion Bragg peak itself), indicating that RBE did not change significantly due to shielding. At the Bragg peak the effectiveness for MN formation per unit dose was decreased, indicating an 'overkill' effect by low-energy very high-LET Fe ions

Inhibition of the tyrosine phosphatase SHP-2 suppresses angiogenesis in vitro and in vivo

Endothelial cell survival is indispensable to maintain endothelial integrity and initiate new vessel formation. We investigated the role of SHP-2 in endothelial cell survival and angiogenesis in vitro as well as in vivo. SHP-2 function in cultured human umbilical vein and human dermal microvascular endothelial cells was inhibited by either silencing the protein expression with antisense-oligodesoxynucleotides or treatment with a pharmacological inhibitor (PtpI IV). SHP-2 inhibition impaired capillary-like structure formation (p < 0.01; n = 8) in vitro as well as new vessel growth ex vivo (p < 0.05; n = 10) and in vivo in the chicken chorioallantoic membrane (p < 0.01, n = 4). Additionally, SHP-2 knock-down abrogated fibroblast growth factor 2 (FGF-2)-dependent endothelial proliferation measured by MTT reduction ( p ! 0.01; n = 12). The inhibitory effect of SHP-2 knock-down on vessel growth was mediated by increased endothelial apoptosis ( annexin V staining, p ! 0.05, n = 9), which was associated with reduced FGF-2-induced phosphorylation of phosphatidylinositol 3-kinase (PI3-K), Akt and extracellular regulated kinase 1/2 (ERK1/2) and involved diminished ERK1/2 phosphorylation after PI3-K inhibition (n=3). These results suggest that SHP-2 regulates endothelial cell survival through PI3-K-Akt and mitogen-activated protein kinase pathways thereby strongly affecting new vessel formation. Thus, SHP-2 exhibits a pivotal role in angiogenesis and may represent an interesting target for therapeutic approaches controlling vessel growth. Copyright (C) 2007 S. Karger AG, Basel

Cell colony counter called CoCoNut

Clonogenic assays are powerful tools for testing cell reproductive death after biological damage caused by, for example, ionizing radiation. Traditionally, the methods require a cumbersome, slow and eye-straining manual counting of viable colonies under a microscope. To speed up the counting process and minimize those issues related to the subjective decisions of the scoring personnel, we developed a semi-automated, image-based cell colony counting setup, named CoCoNut (Colony Counter developed by the Nutech department at the Technical University of Denmark). It consists in an ImageJ macro and a photographic 3D-printed light-box, conceived and demonstrated to work together for Crystal Violet-stained colonies. Careful attention was given to the image acquisition process, which allows background removal (i.e. any unwanted element in the picture) in a minimally invasive manner. This is mainly achieved by optimal lighting conditions in the light-box and dividing the image of a flask that contains viable colonies by the picture of an empty flask. In this way, CoCoNut avoids using aggressive background removal filters that usually lead to suboptimal colony count recovery. The full method was tested with V79 and HeLa cell survival samples. Results were compared to other freely available tools. CoCoNut proved able to successfully distinguish between single and merged colonies and to identify colonies bordering on flask edges. CoCoNut software calibration is fast; it requires the adjustment of a single parameter that is the smallest colony area to be counted. The employment of a single parameter reduces the risk of subjectivity, providing a robust and user-friendly tool, whose results can be easily compared over time and among different bio-laboratories. The method is inexpensive and easy to obtain. Among its advantages, we highlight the possibility of combining the macro with a perfectly reproducible 3D-printed light-box. The CoCoNut software and the 3D-printer files are provided as supporting information (S1 CoCoNut Files).</div

Non-catalytic Roles for XPG with BRCA1 and BRCA2 in Homologous Recombination and Genome Stability

XPG is a structure-specific endonuclease required for nucleotide excision repair, and incision-defective Xpg mutations cause the skin cancer-prone syndrome xeroderma pigmentosum. Truncating mutations instead cause the neurodevelopmental progeroid disorder Cockayne syndrome, but little is known about how XPG loss results in this devastating disease. We identify XPG as a partner of BRCA1 and BRCA2 in maintaining genomic stability through homologous recombination (HRR). XPG depletion causes DNA double-strand breaks, chromosomal abnormalities, cell-cycle delays, defective HRR, inability to overcome replication fork stalling, and replication stress. XPG directly interacts with BRCA2, RAD51, and PALB2, and XPG depletion reduces their chromatin binding and subsequent RAD51 foci formation. Upstream in HRR, XPG interacts directly with BRCA1. Its depletion causes BRCA1 hyper-phosphorylation and persistent chromatin binding. These unexpected findings establish XPG as an HRR protein with important roles in genome stability and suggest how XPG defects produce severe clinical consequences including cancer and accelerated aging