169 research outputs found
An experimental study of particle sedimentation using ultrasonic speckle velocimetry
Ultrasonic speckle velocimetry (USV) is a non-invasive technique that allows the measurement of fluid velocity in flow and also that of powders under sedimentation. To improve the USV method, we studied the sedimentation of polymethyl methacrylate and silica particles in water. Then, we built a sedimentation cell and characterized the diameter distribution of the particles. Subsequently, we carried out a specific study to optimize the USV procedure, the signal processing and data analysis. Space and temporal resolution and USV dynamics are also discussed with regard to the optimization conditions. We found that USV is a useful technique to measure velocities between 10−5 and 1 m s−1, using appropriate ultrasonic transducers. The space resolution is fixed by the length and the percentage of overlapping of the analyzed speckle windows and varies between 48 and 536 μm for the different studied particle families. Furthermore, we found that a 0.1 ns temporal resolution
could be obtained after a zero padding signal processing. In the context of our sedimentation experiments, we showed that the velocities measured by USV are in close agreement with those measured by particle image velocimetry and theory
On the air permeability of Populus pit
Sap hydrodynamics in vascular cells of trees seems to be controlled by small membranes called pits. Understanding how the pit junctions regulate the sap flow and stop embolism by cavitation is today a challenging issue. The hypothesis that the pit porosity adjusts the flow under negative pressure and stops the air bubble diffusion need to be validated. In this talk, we will present the experimental results on Populus trees that support the idea that pits operate "passively" in a biological point of view. This work is based on atomic force microscope (AFM) experiments, which have been realised to measure quantitatively the mechanical properties of pits at the nanoscale
Multiscale deformation of a liquid surface in interaction with a nanoprobe
The interaction between a nanoprobe and a liquid surface is studied. The surface deformation depends on physical and geometric parameters, which are depicted by employing three dimensionless parameters: Bond number Bo, modified Hamaker number Ha, and dimensionless separation distance D*. The evolution of the deformation is described by a strongly nonlinear partial differential equation, which is solved by means of numerical methods. The dynamic analysis of the liquid profile points out the existence of a critical distance D* min, below which the irreversible wetting process of the nanoprobe happens. For D* ≥ D*min, the numerical results show the existence of two deformation profiles, one stable and another unstable from the energetic point of view. Different deformation length scales, characterizing the stable liquid equilibrium interface, define the near- and the far-field deformation zones, where self-similar profiles are found. Finally, our results allow us to provide simple relationships between the parameters, which leads to determine the optimal conditions when performing atomic force microscope measurements over liquids
Broadband nanodielectric spectroscopy by means of amplitude modulation electrostatic force microscopy (AM-EFM)
In this work we present a new AFM based approach to measure the local dielectric response of polymer films at the nanoscale by means of Amplitude Modulation Electrostatic Force Microscopy (AM-EFM). The proposed experimental method is based on the measurement of the tip–sample force via the detection of the second harmonic component of the photosensor signal by means of a lock-in amplifier. This approach allows reaching unprecedented broad frequency range (2–3×104 Hz) without restrictions on the sample environment. The method was tested on different poly(vinyl acetate) (PVAc) films at several temperatures. Simple analytical models for describing the electric tip–sample interaction semi-quantitatively account for the dependence of the measured local dielectric response on samples with different thicknesses and at several tip–sample distances
Nanodielectric mapping of a model polystyrene-poly(vinyl acetate) blend by electrostatic force microscopy
We present a simple method to quantitatively image the dielectric permittivity of soft materials at nanoscale using electrostatic force microscopy (EFM) by means of the double pass method. The EFM experiments are based on the measurement of the frequency shifts of the oscillating tip biased at two different voltages. A
numerical treatment based on the equivalent charge method allows extracting the values of the dielectric permittivity at each image point. This method can be applied with no restrictions of film thickness and tip radius. This method has been applied to image the morphology and the nanodielectric properties of a model
polymer blend of polystyrene and poly(vinyl acetate)
Nanoscale dielectric properties of insulating thin films: From single point measurements to quantitative images
Dielectric relaxation (DR) has shown to be a very useful technique to study dielectric materials like polymers and other glass formers, giving valuable information about the molecular dynamics of the system at different length and time scales. However, the standard DR techniques have a fundamental limitation: they have no spatial resolution. This is of course not a problem when homogeneous and non-structured systems are analyzed but it becomes an important limitation for studying the local properties of heterogeneous and/or nano-structured materials. To overcome this constrain we have developed a novel approach that allows quantitatively measuring the local dielectric permittivity of thin films at the nanoscale by means of Electrostatic Force Microscopy. The proposed experimental method is based on the detection of the local electric force gradient at different values of the tip-sample distance. The value of the dielectric permittivity is then calculated by fitting the experimental points using the Equivalent Charge Method. Even more interesting, we show how this approach can be extended in order to obtain quantitative dielectric images of insulating thin films with an excellent lateral resolution
AFM tip effect on a thin liquid film
We study the interaction between an AFM probe and a liquid film deposited over a flat substrate. We investigate the effects of the physical and geometrical parameters, with a special focus on the film thickness E, the probe radius R, and the distance D between the probe and the free surface. Deformation profiles have been calculated from the numerical simulations of the Young-Laplace equation by taking into account the probe/liquid and the liquid/substrate interactions, characterized by the Hamaker constants, Hpl and Hls. We demonstrate that the deformation of a shallow film is determined by a particular characteristic length λF = (2πγE4/Hls)1/2, resulting from the balance between the capillary force (γ is the surface tension) and the van der Waals liquid/substrate attraction. For the case of a bulk liquid, the extent of the interface deformation is simply controlled by the capillary length λC = (γ/Δρg)1/2. These trends point out two asymptotic regimes, which in turn are bounded by two characteristic film thicknesses Eg = (Hls/2πΔρg)1/4 and Eγ = (R2Hls/2πγ)1/4. For E > Eg, the bulk behavior is recovered, and for E < Eγ, we show the existence of a particular shallow film regime in which a localized tip effect is observed. This tip effect is characterized by the small magnitude of the deformation and an important restriction of its radial extent λF localized below the probe. In addition, we have found that the film thickness has a significant effect on the threshold separation distance Dmin below which the irreversible jumpto- contact process occurs: Dmin is probe radius-dependent for the bulk whereas it is film-thickness-dependent for shallow films. These results have an important impact on the optimal AFM scanning conditions
Imaging dielectric relaxation in nanostructured polymers by frequency modulation electrostatic force microscopy
We have developed a method for imaging the temperature-frequency dependence of the dynamics of nanostructured polymer films with spatial resolution. This method provides images with dielectric compositional contrast well decoupled from topography. Using frequency-modulation electrostatic-force-microscopy, we probe the local frequency-dependent (0.1–100 Hz) dielectric response through measurement of the amplitude and phase of the force gradient in response to an oscillating applied electric field. When the phase is imaged at fixed frequency, it reveals the spatial variation in dielectric losses, i.e., the spatial variation in molecular/dipolar dynamics, with 40 nm lateral resolution. This is demonstrated by using as a model system; a phase separated polystyrene/polyvinyl-acetate (PVAc) blend. We show that nanoscale dynamic domains of PVAc are clearly identifiable in phase images as those which light-up in a band of temperature, reflecting the variations in the molecular/dipolar dynamics approaching the glass transition temperature of PVAc
Experimental study of bubble detection in liquid metal.
Bubble detection in liquid metal is an important issue for various technological applications. For instance, in the framework of Sodium Fast Reactors design, the presence of gas in the sodium flow of the primary and secondary loops is an issue of crucial importance for safety and reliability. Here, the two main gas measurement methods in sodium are ultrasonic testing and eddy-current testing; we investigate the second method in our study. In a first approach, we have performed experiments with liquid metal galinstan containing insulating spherical beads of millimeter size. The liquid metal is probed with an Eddy-current Flowmeter (ECFM) in order to detect the beads and characterize their diameter and position. Results show that the signal measured by the ECFM is correlated with the effect of these parameters. Finally, an analytical model is proposed and compared to the experimental results
Thermo-magnetic behaviour of AFM–MFM cantilevers
Atomic force microscopy (AFM) experiments were performed to study the behaviour of AFM cantilevers under an external magnetic field B and temperature field produced by a coil with an iron core. Four cantilever types were studied. Forces were measured for different B values and at various coil-to-cantilever separation distances. The results were analysed on the basis of a phenomenological model. This model contains the contribution of two terms, one monopole-monopole interaction at short distance, and one apparent paramagnetic interaction in del B-2 at large distance, which represents the temperature effects. We observe a good agreement between the model and the experimental data
- …