Temperature-dependent spectroscopic properties of Tm(3+) in germanate, silica, and phosphate glasses: A comparative study

Spectroscopic properties of thulium-doped germanate, silica, and phosphate glasses were measured and compared since such glasses are of interest as materials for fiber lasers in the eye-safe wavelength region. (3)F(4) excited state fluorescence decay dynamics was investigated at temperatures from 8 to 300 K and the results revealed a strong dependence of the (3)F(4) lifetime on the host matrix. The temperature-dependent stimulated emission cross section was obtained by using the Fuchtbauer-Ladenburg technique. In phosphate glass the fluorescent lifetime is short, making this material difficult to use for 2 mu m laser purposes. Tm(3+)-doped germanate glass shows a longer lifetime than silica, a comparable value of stimulated emission cross section and some interesting temperature-independent properties

Efficient temperature sensing using photoluminescence of Er/Ybimplanted GaN thin films

tThe luminescence characteristics of GaN films implanted with Er at low doses were evaluated. The defect-related yellow luminescence (YL) and green luminescence (GL) bands observed under direct excitationwith 488 nm were attributed to the transitions via different charge levels of the same defect. The quench-ing behavior of the luminescence intensity either with the temperature or concentration variation can beattributed to nonradiative energy transfer (ET) and/or charge transfer by trapping impurities. The tem-perature dependence of the YL band allowed us to identify the defect responsible for this emission. Thebest candidate for this defect was found to be a nitrogen-vacancy. A GaN sample co-doped with Er3+andYb3+ions was prepared, and its optical properties were analyzed. The incorporation of Yb3+improved thePL emission intensity in the visible region. This feature results from the efficient ET processes betweenthese two doping ions. The color coordinate analysis indicates that Er3+/Yb3+co-doped GaN semiconduc-tor emits light with color in the white-light region. To investigate the temperature sensing applicationof the synthesized co-doped semiconductor, the temperature-sensing performance was evaluated usingthe fluorescence intensity ratio technique in the temperature range 200–300K. The significant temper-ature sensitivity indicates its potential as a temperature sensing probe. The maximum sensitivity was15 × 10−4K−1at 200 K

Non-invasive absolute measurement of leaf water content using terahertz quantum cascade lasers

Background: Plant water resource management is one of the main future challenges to fight recent climatic changes. The knowledge of the plant water content could be indispensable for water saving strategies. Terahertz spectroscopic techniques are particularly promising as a non-invasive tool for measuring leaf water content, thanks to the high predominance of the water contribution to the total leaf absorption. Terahertz quantum cascade lasers (THz QCL) are one of the most successful sources of THz radiation. Results: Here we present a new method which improves the precision of THz techniques by combining a transmission measurement performed using a THz QCL source, with simple pictures of leaves taken by an optical camera. As a proof of principle, we performed transmission measurements on six plants of Vitis vinifera L. (cv "Colorino"). We found a linear law which relates the leaf water mass to the product between the leaf optical depth in the THz and the projected area. Results are in optimal agreement with the proposed law, which reproduces the experimental data with 95% accuracy. Conclusions: This method may overcome the issues related to intra-variety heterogeneities and retrieve the leaf water mass in a fast, simple, and non-invasive way. In the future this technique could highlight different behaviours in preserving the water status during drought stress

Terahertz imaging for non-invasive classification of healthy and cimiciato-infected hazelnuts

The development of new non-invasive approaches able to recognize defective food is currently a lively field of research. In particular, a simple and non-destructive method able to recognize defective hazelnuts, such as cimiciato-infected ones, in real-time is still missing. This study has been designed to detect the presence of such damaged hazelnuts. To this aim, a measurement setup based on terahertz (THz) radiation has been developed. Images of a sample of 150 hazelnuts have been acquired in the low THz range by a compact and portable active imaging system equipped with a 0.14 THz source and identified as Healthy Hazelnuts (HH) or Cimiciato Hazelnut (CH) after visual inspection. All images have been analyzed to find the average transmission of the THz radiation within the sample area. The differences in the distribution of the two populations have been used to set up a classification scheme aimed at the discrimination between healthy and injured samples. The performance of the classification scheme has been assessed through the use of the confusion matrix on 50 samples. The False Positive Rate (FPR) and True Negative Rate (TNR) are 0% and 100%, respectively. On the other hand, the True Positive Rate (TPR) and False Negative Rate (FNR) are 75% and 25%, respectively. These results are relevant from the perspective of the development of a simple, automatic, real-time method for the discrimination of cimiciato-infected hazelnuts in the processing industry

Infrared Photoluminescence of Nd-Doped Sesquioxide and Fluoride Nanocrystals: A Comparative Study

Lanthanide ions possess various emission channels in the near-infrared region that are well known in bulk crystals but are far less studied in samples with nanometric size. In this work, we present the infrared spectroscopic characterization of various Nd-doped fluoride and sesquioxide nanocrystals, namely Nd:Y2O3, Nd:Lu2O3, Nd:Sc2O3, Nd:YF3, and Nd:LuF3. Emissions from the three main emission bands in the near-infrared region have been observed and the emission cross-sections have been calculated. Moreover, another decay channel at around 2 μm has been observed and ascribed to the 4F3/2→4I15/2 transition. The lifetime of the 4F3/2 level has been measured under LED pumping. Emission cross-sections for the various compounds are calculated in the 1 μm, 900 nm, and 1.3 μm regions and are of the order of 10−20 cm2 in agreement with the literature results. Those in the 2 μm region are of the order of 10−21 cm2

Strain-Induced Plasmon Confinement in Polycrystalline Graphene

Terahertz spectroscopy is a perfect tool to investigate the electronic intraband conductivity of graphene, but a phenom-enological model (Drude-Smith) is often needed to describe disorder. By studying the THz response of isotropically strained polycrystalline graphene and using a fully atomistic computational approach to fit the results, we demonstrate here the connection between the Drude-Smith parameters and the microscopic behavior. Importantly, we clearly show that the strain-induced changes in the conductivity originate mainly from the increased separation between the single-crystal grains, leading to enchanced localization of the plasmon excitations. Only at the lowest strain values explored, a behavior consistent with the deformation of the individual grains can instead be observed

Thermal noise reduction for present and future gravitational wave detectors

Thermal noise in mirror suspension is and will be the most severe fundamental limit to the low-frequency sensitivity of interferometric gravitational wave detectors currently under construction. The technical solutions, adopted in the Virgo detector, optimize the current suspension scheme, but new materials and new designs are needed to further reduce the suspension thermal noise. Silicon fibers are promising candidates both for room temperature advanced detectors and for future cryogenic interferometric detectors

Enhanced Piezoelectricity of Electrospun Polyvinylidene Fluoride Fibers for Energy Harvesting.

Piezoelectric polymers are promising energy materials for wearable and implantable applications for replacing bulky batteries in small and flexible electronics. Therefore, many research studies are focused on understanding the behavior of polymers at a molecular level and designing new polymer-based generators using polyvinylidene fluoride (PVDF). In this work, we investigated the influence of voltage polarity and ambient relative humidity in electrospinning of PVDF for energy-harvesting applications. A multitechnique approach combining microscopy and spectroscopy was used to study the content of the β-phase and piezoelectric properties of PVDF fibers. We shed new light on β-phase crystallization in electrospun PVDF and showed the enhanced piezoelectric response of the PVDF fiber-based generator produced with the negative voltage polarity at a relative humidity of 60%. Above all, we proved that not only crystallinity but also surface chemistry is crucial for improving piezoelectric performance in PVDF fibers. Controlling relative humidity and voltage polarity increased the d33 piezoelectric coefficient for PVDF fibers by more than three times and allowed us to generate a power density of 0.6 μW·cm-2 from PVDF membranes. This study showed that the electrospinning technique can be used as a single-step process for obtaining a vast spectrum of PVDF fibers exhibiting different physicochemical properties with β-phase crystallinity reaching up to 74%. The humidity and voltage polarity are critical factors in respect of chemistry of the material on piezoelectricity of PVDF fibers, which establishes a novel route to engineer materials for energy-harvesting and sensing applications

Enhanced Piezoelectricity of Electrospun Polyvinylidene Fluoride Fibers for Energy Harvesting.

Piezoelectric polymers are promising energy materials for wearable and implantable applications for replacing bulky batteries in small and flexible electronics. Therefore, many research studies are focused on understanding the behavior of polymers at a molecular level and designing new polymer-based generators using polyvinylidene fluoride (PVDF). In this work, we investigated the influence of voltage polarity and ambient relative humidity in electrospinning of PVDF for energy-harvesting applications. A multitechnique approach combining microscopy and spectroscopy was used to study the content of the β-phase and piezoelectric properties of PVDF fibers. We shed new light on β-phase crystallization in electrospun PVDF and showed the enhanced piezoelectric response of the PVDF fiber-based generator produced with the negative voltage polarity at a relative humidity of 60%. Above all, we proved that not only crystallinity but also surface chemistry is crucial for improving piezoelectric performance in PVDF fibers. Controlling relative humidity and voltage polarity increased the d33 piezoelectric coefficient for PVDF fibers by more than three times and allowed us to generate a power density of 0.6 μW·cm-2 from PVDF membranes. This study showed that the electrospinning technique can be used as a single-step process for obtaining a vast spectrum of PVDF fibers exhibiting different physicochemical properties with β-phase crystallinity reaching up to 74%. The humidity and voltage polarity are critical factors in respect of chemistry of the material on piezoelectricity of PVDF fibers, which establishes a novel route to engineer materials for energy-harvesting and sensing applications

Diode-pumped Nd: BaY 2 F 8 picosecond laser mode-locked with carbon nanotube saturable absorbers

Picosecond pulse generation near 1-m wavelength has been achieved with a Nd: BaY 2 F 8 (Nd:BaYF) laser mode-locked using a single-walled carbon nanotube saturable absorber (SWCNT-SA). The laser was operated at its main 1049-nm transition, generating 8.5-ps pulses with Ϸ70-mW output power for Ϸ570-mW absorbed pump power. This is the first demonstration of cw mode-locking in the picosecond regime with Nd-doped crystals and SWCNT-SAs. The requirements on the SWCNT-SA for successful mode-locking in relatively narrowband neodymium lasers are reviewed and their implications are discussed