Structural and magnetic study of LaBaCoCuO5+delta

The structure and magnetic properties of the compound LaBaCuCoO5+delta have been studied for the non-stoichiometric oxygen concentration delta approximate to 0.6. The structure is pseudo-cubic with a tripled perovskite unit cell. The crystal structure was determined by a combined Rietveld fit to neutron and synchrotron x-ray powder diffraction data in the orthorhombic Pmmm space group, with cell parameters a=3.9223(3) angstrom, b=3.9360(3) angstrom, c=11.7073(8) angstrom, and V=180.74(2) angstrom(3) (room temperature). Antiferromagnetic ordering of Cu and Co magnetic moments is observed below 205(4) K. The magnetic structure with cell a(M)=2a, b(M)=2b, and c(M)=2c, could be described with the Shubnikov space group Fmmm'. The magnetic moments of both equivalent Cu/Co sites were determined at 50 and 170 K to be 0.83(3)mu(B) and 0.58(3)mu(B), respectively, consistent with one unpaired electron per atom. The fit of the intensities to a simple mean field magnetic model appeared to be insufficient to account for the variation of moments at temperatures close to T-N while a three dimensional Heisenberg model could improve the fit. Susceptibility measurements between 4 and 350 K also show irreversibility below 150 K. The local environments of Cu and Co were studied by extended x-ray absorption fine structure spectroscopy at both absorption edges. Cu atoms adopt an elongated octahedral or square-based pyramidal oxygen environment which suggests mainly the presence of Cu(II) in the structure. Co adopts different local environments, depending on the electronic and spin states.711

Pressure-Induced Amorphization of Small Pore Zeolites-the Role of Cation-H2O Topology and Anti-glass Formation

Systematic studies of pressure-induced amorphization of natrolites (PIA) containing monovalent extra-framework cations (EFC) Li+, Na+, K+, Rb+, Cs+ allow us to assess the role of two different EFC-H2O configurations within the pores of a zeolite: one arrangement has H2O molecules (NATI) and the other the EFC (NAT(II)) in closer proximity to the aluminosilicate framework. We show that NAT(I) materials have a lower onset pressure of PIA than the NAT(II) materials containing Rb and Cs as EFC. The onset pressure of amorphization (P-A) of NAT(II) materials increases linearly with the size of the EFC, whereas their initial bulk moduli (P-1 phase) decrease linearly. Only Cs- and Rb-NAT reveal a phase separation into a dense form (P-2 phase) under pressure. High-Angle Annular Dark Field Scanning Transmission Electron Microscopy (HAADF-STEM) imaging shows that after recovery from pressures near 25 and 20 GPa long-range ordered Rb-Rb and Cs-Cs correlations continue to be present over length scales up to 100 nm while short-range ordering of the aluminosilicate framework is significantly reduced-this opens a new way to form anti-glass structuresopen

Manganese hexacyanomanganate open framework as a high-capacity positive electrode material for sodium-ion batteries

Potential applications of sodium-ion batteries in grid-scale energy storage, portable electronics and electric vehicles have revitalized research interest in these batteries. However, the performance of sodium-ion electrode materials has not been competitive with that of lithium-ion electrode materials. Here we present sodium manganese hexacyanomanganate (Na2MnII[Mn-II(CN)(6)]), an open-framework crystal structure material, as a viable positive electrode for sodium-ion batteries. We demonstrate a high discharge capacity of 209 mAh g(-1) at C/5 (40 mA g(-1)) and excellent capacity retention at high rates in a propylene carbonate electrolyte. We provide chemical and structural evidence for the unprecedented storage of 50% more sodium cations than previously thought possible during electrochemical cycling. These results represent a step forward in the development of sodium-ion batteries.open212

Ligand-hole localization in oxides with unusual valence Fe

Unusual high-valence states of iron are stabilized in a few oxides. A-site-ordered perovskite-structure oxides contain such iron cations and exhibit distinct electronic behaviors at low temperatures, e.g. charge disproportionation (4Fe4+ → 2Fe3+ + 2Fe5+) in CaCu3Fe4O12 and intersite charge transfer (3Cu2+ + 4Fe3.75+ → 3Cu3+ + 4Fe3+) in LaCu3Fe4O12. Here we report the synthesis of solid solutions of CaCu3Fe4O12 and LaCu3Fe4O12 and explain how the instabilities of their unusual valence states of iron are relieved. Although these behaviors look completely different from each other in simple ionic models, they can both be explained by the localization of ligand holes, which are produced by the strong hybridization of iron d and oxygen p orbitals in oxides. The localization behavior in the charge disproportionation of CaCu3Fe4O12 is regarded as charge ordering of the ligand holes, and that in the intersite charge transfer of LaCu3Fe4O12 is regarded as a Mott transition of the ligand holes

Risk Factors for Anthroponotic Cutaneous Leishmaniasis at the Household Level in Kabul, Afghanistan

Cutaneous leishmaniasis is a vector-borne protozoan disease that is characterized by cutaneous lesions which develop at the site of the insect bite. Lesions can vary in severity, clinical appearance, and time to cure; in a proportion of patients lesions can become chronic, leading to disfiguring mucosal leishmaniasis or leishmaniasis recidvans. Albeit not fatal, cutaneous leishmaniasis can have a significant social impact as it may lead to severe stigmatisation of affected individuals when lesions or scars occur on the face and exposed extremeties. Over the last 10–20 years there has been an increase in the number of leishmaniasis cases reported in South Asia, particularly in Afghanistan. Little is known about the household-level risk factors for infection and disease. Here we confirm previous reports that had shown the association of cutaneous leishmaniasis with age and clustering of cases at the household-level. Additionally, we show that risk of cutaneous leishmaniasis is associated with household construction (i.e. brick walls) and design (i.e. proportion of windows with screens)

Optimal preparation of high-entropy boride-silicon carbide ceramics

High-entropy boride-silicon carbide (HEB-SiC) ceramics were fabricated using boride-based powders prepared from borothermal and boro/carbothermal reduction methods. The effects of processing routes (borothermal reduction and boro/carbothermal reduction) on the HEB powders were examined. HEB-SiC ceramics with > 98% theoretical density were prepared by spark plasma sintering at 2000 °C. It was demonstrated that the addition of SiC led to slight coarsening of the microstructure. The HEB-SiC ceramics prepared from boro/carbothermal reduction powders showed a fine-grained microstructure and higher Vickers’ hardness but lower fracture toughness value as compared with the same composition prepared from borothermal reduction powders. These results indicated that the selection of the powder processing method and the addition of SiC phase could contribute to the optimal preparation of high-entropy boride-based ceramics