100 research outputs found
The Acute Effects of Ballistic and Non-Ballistic Concentric-Only Half-Squats on Squat Jump Performance
The purposes of this dissertation were to examine bilateral asymmetry as a factor of postactivation potentiation, examine and compare the acute effects of ballistic and non-ballistic concentric-only half-squats on squat jump performance, and compare the potentiation and temporal profiles of strong and weak subjects following potentiation protocols that included ballistic and non-ballistic concentric-only half-squats. The following are major findings of the dissertation. Squat jump performance may be acutely enhanced following ballistic concentriconly half-squats; however the changes in performance do not appear to be related to bilateral symmetry. Ballistic concentric-only half-squats acutely improve various squat jump performance variables at various time intervals; however the changes in performance are not related to the bilateral symmetry of the subject. Ballistic concentric-only half-squats produced superior acute potentiation effects with regard to jump height, peak power, and allometricallyscaled peak power as compared to non-ballistic concentric-only half-squats and a control protocol. Stronger subjects potentiated earlier and to a greater extent as compared to their weaker counterparts. This dissertation indicates that bilateral symmetry may not be considered as an underlying factor affecting postactivation potentiation. However, it is suggested that future research should continue to investigate the factors that are associated with postactivation potentiation. The findings of this dissertation also demonstrate the importance of how an individual performs a concentric-only squatting motion. By training with ballistic movements, a greater training stimulus may be achieved as compared to training with non-ballistic movements. While this dissertation discussed the acute potentiation differences between ballistic and nonballistic concentric-only half-squats, longitudinal research is needed to determine if different training effects result from each training method. This dissertation also supports that notion that stronger individuals may benefit more with regard to potentiation effects. In order to optimize performance and realize the greatest potentiation effects, it is recommended that greater levels of relative strength should be sought. It is suggested that further research is needed on the longitudinal differences in the potentiation effects an individual can realize based on their strength levels
Electromyographical Analysis of Lower Extremity Muscle Activation During Variations of the Loaded Step-Up Exercise
The loaded step-up exercise allows strength and conditioning practitioners to incorporate a unilateral resistance for athletes while performing extension at the hip, knee, and plantar flexion at the ankle. This study evaluated the activation of the biceps femoris (BF), gluteus maximus (GMx), gluteus medius (GMe), rectus femoris, semitendinosus (ST), vastus lateralis, and vastus medialis during 4 variations of the step-up exercise to assess the specific muscle training stimulus of each exercise variation. The exercises included the step-up, crossover step-up, diagonal step-up, and lateral step-up. Fifteen women who regularly engaged in lower body resistance training performed the 4 exercises with 6 repetition maximum loads on a 45.72-cm (18-in.) plyometric box. Data were collected with a telemetered electromyography (EMG) system, and root mean square values were calculated for EMG data for eccentric and concentric phases. Results of a repeated-measures analysis of variance revealed a variety of differences in muscle activation between the exercises (
Load absorption force-time characteristics following the second pull of weightlifting derivatives
The purpose of this study was to compare the load absorption force-time characteristics of weightlifting catching and pulling derivatives. Twelve resistance-trained men performed repetitions of the hang power clean (HPC), jump shrug (JS), and hang high pull (HHP) on a force platform with 30, 45, 65, and 80% of their one repetition maximum (1RM) HPC. Load absorption phase duration, mean force, and work were calculated from the force-time data. The HHP produced a significantly longer load absorption phase duration compared to the HPC (p < 0.001, d = 3.77) and JS (p < 0.001, d = 5.48), while no difference existed between the HPC and JS (p = 0.573, d = 0.51). The JS produced significantly greater load absorption mean forces compared to the HPC (p < 0.001, d = 2.85) and HHP (p < 0.001, d = 3.75), while no difference existed between the HPC and HHP (p = 0.253, d = 0.37). Significantly more load absorption work was performed during the JS compared to the HPC (p < 0.001, d = 5.03) and HHP (p < 0.001, d = 1.69), while HHP load absorption work was also significantly greater compared to the HPC (p < 0.001, d = 4.81). The weightlifting pulling derivatives examined in the current study (JS and HHP) produced greater load absorption demands following the second pull compared to the weightlifting catching derivative (HPC). The JS and HHP may be used as effective training stimuli for load absorption during impact tasks such as jumping
LOWER EXTREMITY JOINT VELOCITY COMPARISONS DURING THE HANG POWER CLEAN AND JUMP SHRUG AT VARIOUS LOADS
The aim of this study was to compare the kinematic profile between the hang power clean (HPC) and jump shrug (JS). Eighteen college students performed repetitions of the HPC and JS at 40, 60, and 80% of their 1RM HPC. Two trials at each load for each exercise were completed and the peak joint velocity of the hip, knee, and ankle joints were compared using a series of 2 x 3 repeated measures ANOVA. The peak joint velocity of the hip, knee, and ankle during the JS was statistically greater than the HPC at all loads. Statistically significant differences in hip joint velocity existed between repetitions at 40 and 80% 1RM HPC as well as between 60 and 80% 1RM HPC. Joint velocity during the JS was superior to the HPC at all loads examined. Differences in technique between exercises and loads may alter lower extremity joint velocity
Preliminary Scale of Reference Values for Evaluating Reactive Strength Index-Modified in Male and Female NCAA Division I Athletes
The purpose of this analysis was to construct a preliminary scale of reference values for reactive strength index-modified (RSImod). Countermovement jump data from 151 National Collegiate Athletic Association (NCAA) Division I collegiate athletes (male n = 76; female n = 75) were analyzed. Using percentiles, scales for both male and female samples were constructed. For further analysis, athletes were separated into four performance groups based on RSImod and comparisons of jump height (JH), and time to takeoff (TTT) were performed. RSImod values ranged from 0.208 to 0.704 and 0.135 to 0.553 in males and females, respectively. Males had greater RSImod (p \u3c 0.001, d = 1.15) and JH (p \u3c 0.001, d = 1.41) as compared to females. No statistically significant difference was observed for TTT between males and females (p = 0.909, d = 0.02). Only JH was found to be statistically different between all performance groups. For TTT no statistical differences were observed when comparing the top two and middle two groups for males and top two, bottom two, and middle two groups for females. Similarities in TTT between sexes and across performance groups suggests JH is a primary factor contributing to differences in RSImod. The results of this analysis provide practitioners with additional insight as well as a scale of reference values for evaluating RSImod scores in collegiate athletes
THE EFFECT OF PLYOMETRIC TRAINING VOLUME ON JUMPING PERFORMANCE
This study compared high and low daily volume periodized plyometric training programs and their effect on countermovement jump (CMJ) performance over a 2 week testing time course after training. Thirty-five male subjects participated. Subjects CMJ was tested on a force platform prior to and at 2, 6, 10 and 14 days post training. Peak vertical ground reaction force (GRF), reactive strength index-modified (RSI mod), jump height (JH), and body mass were assessed. No differences were found between the high and low volume training groups. Subjects GRF, RSI mod, and JH performance was improved in a range of 6 to 14 days post- training. Low and high volume periodized plyometric training programs produced equal results. Six to 14 days of recovery post training was required to accrue the training benefit
Force-Time Differences between Ballistic and Non-Ballistic Half-Squats.
The purpose of this study was to examine the force-time differences between concentric-only half-squats (COHS) performed with ballistic (BAL) or non-ballistic (NBAL) intent across a range of loads. Eighteen resistance-trained men performed either BAL or NBAL COHS at 30%, 50%, 70%, and 90% of their one repetition maximum (1RM) COHS. Relative peak force (PF) and relative impulse from 0⁻50 ms (Imp50), 0⁻90 ms (Imp90), 0⁻200 ms (Imp200), and 0⁻250 ms (Imp250) were compared using a series of 2 × 4 (intent × load) repeated measures ANOVAs with Bonferroni post hoc tests. Cohen\u27s d effect sizes were calculated to provide measures of practical significance between the BAL and NBAL COHS and each load. BAL COHS produced statistically greater PF than NBAL COHS at 30% (d = 3.37), 50% (d = 2.88), 70% (d = 2.29), and 90% 1RM (d = 1.19) (all p \u3c 0.001). Statistically significant main effect differences were found between load-averaged BAL and NBAL COHS for Imp90 (p = 0.006, d = 0.25), Imp200 (p = 0.001, d = 0.36), and Imp250 (p \u3c 0.001, d = 0.41), but not for Imp50 (p = 0.018, d = 0.21). Considering the greater PF and impulse observed during the BAL condition, performing COHS with BAL intent may provide a favorable training stimulus compared to COHS performed with NBAL intent
Mechanical Demands of the Hang Power Clean and Jump Shrug: A Joint-level Perspective
The purpose of this study was to investigate the joint- and load-dependent changes in the mechanical demands of the lower extremity joints during the hang power clean (HPC) and the jump shrug (JS). Fifteen male lacrosse players were recruited from an NCAA DI team, and completed three sets of the HPC and JS at 30%, 50%, and 70% of their HPC 1-Repetition Maximum (1-RM HPC) in a counterbalanced and randomized order. Motion analysis and force plate technology were used to calculate the positive work, propulsive phase duration, and peak concentric power at the hip, knee, and ankle joints. Separate three-way analysis of variances were used to determine the interaction and main effects of joint, load, and lift type on the three dependent variables. The results indicated that the mechanics during the HPC and JS exhibit joint-, load-, and lift-dependent behavior. When averaged across joints, the positive work during both lifts increased progressively with external load, but was greater during the JS at 30% and 50% of 1-RM HPC than during the HPC. The JS was also characterized by greater hip and knee work when averaged across loads. The joint-averaged propulsive phase duration was lower at 30% than at 50% and 70% of 1-RM HPC for both lifts. Furthermore, the load-averaged propulsive phase duration was greater for the hip than the knee and ankle joint. The jointaveraged peak concentric power was the greatest at 70% of 1-RM for the HPC and at 30% to 50% of 1-RM for the JS. In addition, the joint-averaged peak concentric power of the JS was greater than that of the HPC. Furthermore, the load-averaged peak knee and ankle concentric joint powers were greater during the execution of the JS than the HPC. However, the loadaveraged power of all joints differed only during the HPC, but was similar between the hip and knee joints for the JS. Collectively, these results indicate that compared to the HPC the JS is characterized by greater hip and knee positive joint work, and greater knee and ankle peak concentric joint power, especially if performed at 30 and 50% of 1-RM HPC. This study provides important novel information about the mechanical demands of two commonly used exercises and should be considered in the design of resistance training programs that aim to improve the explosiveness of the lower extremity joints
A comparison of catch phase force-time characteristics during clean derivatives from the knee
The aim of this study was to compare load-absorption force-time characteristics of the clean from the knee (CK), power clean from the knee (PCK) and clean pull from the knee (CPK). Ten collegiate athletes (age 27.5 ± 4.2 years; height 180.4 ± 6.7 cm; mass 84.4 ± 7.8 kg), performed three repetitions each of the CK, PCK and CPK with 90% of their 1RM power clean on a force platform. The CK load-absorption duration (0.95 ± 0.35 s) was significantly longer compared to the CPK (0.44 ± 0.15 s; p 0.05, d = 1.08), with no differences between PCK and CPK (p > 0.05, d = 0.91). The CPK demonstrated the greatest mean force (2039 ± 394 N), which was significantly greater than the PCK (1771 ± 325 N; p = 0.012, d = 0.83), but not significantly different to the CK (1830 ± 331 N; p > 0.05, d = 0.60); CK and PCK were not different (p > 0.05, d = 0.18). Significantly more load-absorption work was performed during the CK (655 ± 276 J) compared to the PCK (288 ± 109 J; d = 1.75, p 0.05). Additionally, more load-absorption work was performed during the CPK compared to the PCK (d = 1.90, p = 0.032). Inclusion of the catch phase during the CK does not provide any additional stimulus in terms of mean force or work during the load-absorption phase compared to the CPK, while the CPK may be beneficial in training rapid force absorption due to high force and a short duration
Do the peak and mean force methods of assessing vertical jump force asymmetry agree?
The aim of this study was to assess agreement between peak and mean force methods of quantifying force asymmetry during the countermovement jump (CMJ).
Forty-five men performed four CMJ with each foot on one of two force plates recording at 1000 Hz. Peak and mean were obtained from both sides during the braking and propulsion phases. The dominant side was obtained for the braking and propulsion phase as the side with the largest peak or mean force and agreement was assessed using percentage agreement and the kappa coefficient. Braking phase peak and mean force methods demonstrated a percentage agreement of 84% and a kappa value of 0.67 (95% confidence limits: 0.45 to 0.90), indicating substantial agreement. Propulsion phase peak and mean force methods demonstrated a percentage agreement of 87% and a kappa value of 0.72 (95% confidence limits: 0.51 to 0.93), indicating substantial agreement. While agreement was substantial, side-to-side differences were not reflected equally when peak and mean force methods of assessing CMJ asymmetry were used. These methods should not be used interchangeably, but rather a combined approach should be used where practitioners consider both peak and mean force to obtain the fullest picture of athlete asymmetry
- …