591 research outputs found
Edén: libro ilustrado de mitologÃa y fantasÃa. Proyecto de diseño e ilustración aplicado
Este proyecto se titula Edén: Libro Ilustrado de MitologÃa y FantasÃa,
consiste en crear un libro ilustrado dedicado al tema mitológico y fantástico.
Es un trabajo de profundización y profesionalización en diseño e
ilustración, utilizando todas las habilidades asà como los conocimientos
teóricos y prácticos obtenidos durante los cuatro años del estudio del Grado
en Bellas Artes.
El proyecto se constituye en dos grandes bloques: El primero presenta
los objetivos y la metodologÃa del trabajo. El segundo indaga sobre el
desarrollo y la producción del proyecto. El segundo bloque se divide en
dos fases, la fase del estudio y la fase de la producción. La fase del estudio
consiste en la indagación para la búsqueda de ideas entorno al tema de
las ilustraciones, de la mitologÃa, y también en el estudio de los referentes
y antecedentes relacionados con el tema y el tipo de ilustración que se
desarrolla. La fase de la producción presenta la producción y el proceso
de las ilustraciones, el diseño del logotipo, las aplicaciones al diseño editorial
y la elaboración del prototipo del libro ilustrado. Al final, el proyecto
termina con la conclusión, la bibliografÃa, el Ãndice de las imágenes y el
anexo donde aparecen las presentaciones visuales de las ilustraciones y
del prototipo del libro ilustrado.Zhu Qiu, T. (2014). Edén: libro ilustrado de mitologÃa y fantasÃa. Proyecto de diseño e ilustración aplicado. http://hdl.handle.net/10251/48772.Archivo delegad
Single Nitrogen-Vacancy-NMR of Amine-Functionalized Diamond Surfaces
Nuclear magnetic resonance (NMR) imaging with shallow nitrogen-vacancy (NV)
centers in diamond offers an exciting route toward sensitive and localized
chemical characterization at the nanoscale. Remarkable progress has been made
to combat the degradation in coherence time and stability suffered by
near-surface NV centers using suitable chemical surface termination. However,
approaches that also enable robust control over adsorbed molecule density,
orientation, and binding configuration are needed. We demonstrate a diamond
surface preparation for mixed nitrogen- and oxygen-termination that
simultaneously improves NV center coherence times for emitters <10-nm-deep and
enables direct and recyclable chemical functionalization via amine-reactive
crosslinking. Using this approach, we probe single NV centers embedded in
nanopillar waveguides to perform NMR sensing of covalently
bound trifluoromethyl tags in the ca. 50-100 molecule regime. This work
signifies an important step toward nuclear spin localization and structure
interrogation at the single-molecule level.Comment: 21 pages and 16 pages supporting informatio
Multicone Diamond Waveguides for Nanoscale Quantum Sensing
The long-lived electronic spin of the nitrogen-vacancy (NV) center in diamond
is a promising quantum sensor for detecting nanoscopic magnetic and electric
fields in a variety of experimental conditions. Nevertheless, an outstanding
challenge in improving measurement sensitivity is the poor signal-to-noise
ratio (SNR) of prevalent optical spin-readout techniques. Here, we address this
limitation by coupling individual NV centers to optimized diamond nanopillar
structures, thereby improving optical collection efficiency of fluorescence.
First, we optimize the structure in simulation, observing an increase in
collection efficiency for tall ( 5 m) pillars with tapered
sidewalls. We subsequently verify these predictions by fabricating and
characterizing a representative set of structures using a reliable and
reproducible nanofabrication process. An optimized device yields increased SNR,
owing to improvements in collimation and directionality of emission.
Promisingly, these devices are compatible with low-numerical-aperture,
long-working-distance collection optics, as well as reduced tip radius,
facilitating improved spatial resolution for scanning applications.Comment: 22 pages, five figure
The interplay of personality traits, anxiety, and depression in Chinese college students: a network analysis
BackgroundAnxiety and depression are among the greatest contributors to the global burden of diseases. The close associations of personality traits with anxiety and depression have been widely described. However, the common practice of sum scores in previous studies limits the understanding of the fine-grained connections between different personality traits and anxiety and depression symptoms and cannot explore and compare the risk or protective effects of personality traits on anxiety and depression symptoms.ObjectiveWe aimed to determine the fine-grained connections between different personality traits and anxiety and depression symptoms and identify the detrimental or protective effects of different personality traits on anxiety and depression symptoms.MethodsA total of 536 college students from China were recruited online, and the average age was 19.98 ± 1.11. The Chinese version of the Ten-Item Personality Inventory, Generalized Anxiety Disorder-7, and Patient Health Questionnaire-9 was used to investigate the personality traits and symptoms of anxiety and depression of participants after they understood the purpose and filling method of the survey and signed the informed consent. The demographic characteristics were summarized, and the scale scores were calculated. The network model of personality traits and symptoms of anxiety and depression was constructed, and bridge expected influence (BEI) was measured to evaluate the effect of personality traits on anxiety and depression. The edge accuracy and BEI stability were estimated, and the BEI difference and the edge weight difference were tested.ResultsIn the network, 29 edges (indicating partial correlations between variables) bridged the personality community and the anxiety and depression community, among which the strongest correlations were extraversion-fatigue, agreeableness-suicidal ideation, conscientiousness-uncontrollable worry, neuroticism-excessive worry, neuroticism-irritability, and openness-feelings of worthlessness. Neuroticism had the highest positive BEI value (0.32), agreeableness had the highest negative BEI value (−0.27), and the BEI values of neuroticism and agreeableness were significantly different from those of most other nodes (p < 0.05).ConclusionThere are intricate correlations between personality traits and the symptoms of anxiety and depression in college students. Neuroticism was identified as the most crucial risk trait for depression and anxiety symptoms, while agreeableness was the most central protective trait
A bio-inspired multi-functional tendon-driven tactile sensor and application in obstacle avoidance using reinforcement learning
This paper presents a new bio-inspired tactile sensor that is multi-functional and has different sensitivity contact areas. The TacTop area is sensitive and is used for object classification when there is a direct contact. On the other hand, the TacSide area is less sensitive and is used to localize the side contact areas. By connecting tendons from the TacSide area to the TacTop area, the sensor is able to perform multiple detection functions using the same expression region. For the mixed contacting signals collected from the expression region with numerous markers and pins, we build a modified DenseNet121 network which specifically removes all fully connected layers and keeps the rest as a sub-network. The proposed model also contains a global average pooling layer with two branching networks to handle different functions and provide accurate spatial translation of the extracted features. The experimental results demonstrate a high prediction accuracy of 98% for object perception and localization. Furthermore, the new tactile sensor is utilized for obstacle avoidance, where action skills are extracted from human demonstrations and then an action dataset is generated for reinforcement learning to guide robots towards correct responses after contact detection. To evaluate the effectiveness of the proposed framework, several simulations are performed in the MuJoCo environment
Estimation of species divergence times in presence of cross-species gene flow
Cross-species introgression can have significant impacts on phylogenomic reconstruction of species divergence events. Here, we used simulations to show how the presence of even a small amount of introgression can bias divergence time estimates when gene flow is ignored in the analysis. Using advances in analytical methods under the multispecies coalescent (MSC) model, we demonstrate that by accounting for incomplete lineage sorting and introgression using large phylogenomic data sets this problem can be avoided. The multispecies-coalescent-with-introgression (MSci) model is capable of accurately estimating both divergence times and ancestral effective population sizes, even when only a single diploid individual per species is sampled. We characterize some general expectations for biases in divergence time estimation under three different scenarios: 1) introgression between sister species, 2) introgression between non-sister species, and 3) introgression from an unsampled (i.e., ghost) outgroup lineage. We also conducted simulations under the isolation-with-migration (IM) model, and found that the MSci model assuming episodic gene flow was able to accurately estimate species divergence times despite high levels of continuous gene flow. We estimated divergence times under the MSC and MSci models from two published empirical datasets with previous evidence of introgression, one of 372 target-enrichment loci from baobabs (Adansonia), and another of 1,000 transcriptome loci from fourteen species of the tomato relative, Jaltomata. The empirical analyses not only confirm our findings from simulations, demonstrating that the MSci model can reliably estimate divergence times, but also show that divergence time estimation under the MSC can be robust to the presence of small amounts of introgression in empirical datasets with extensive taxon sampling
- …