27,862 research outputs found
A new model for the double well potential
A new model for the double well potential is presented in the paper. In the
new potential, the exchanging rate could be easily calculated by the
perturbation method in supersymmetric quantum mechanics. It gives good results
whether the barrier is high or sallow. The new model have many merits and may
be used in the double well problem.Comment: 3pages, 3figure
Feedback local optimality principle applied to rocket vertical landing VTVL
Vertical landing is becoming popular in the last fifteen years, a technology known under the acronym VTVL, Vertical Takeoff and Vertical Landing [1,2]. The interest in such landing technology is dictated by possible cost reductions [3,4], that impose spaceship’s recycling. The rockets are not generally de- signed to perform landing operations, rather their design is aimed at takeoff operations, guaranteeing a very high forward acceleration to gain the velocity needed to escape the gravitational force. In this paper a new control method based on Feedback Local Optimality Principle, named FLOP is applied to the rocket landing problem. The FLOP belongs to a special class of optimal controllers, developed by the mechatronic and vehicle dynamics lab of Sapienza, named Variational Feedback Controllers - VFC, that are part of an ongoing research and are recently applied in different field: nonlinear system [5], marine and terrestrial autonomous vehicles [6,7,8], multi agents interactions and vibration control [9, 10]. The paper is devoted to show the robustness of the nonlinear controlled system, comparing the performances with the LQR, one of the most acknowledged methods in optimal control
The perfect spin injection in silicene FS/NS junction
We theoretically investigate the spin injection from a ferromagnetic silicene
to a normal silicene (FS/NS), where the magnetization in the FS is assumed from
the magnetic proximity effect. Based on a silicene lattice model, we
demonstrated that the pure spin injection could be obtained by tuning the Fermi
energy of two spin species, where one is in the spin orbit coupling gap and the
other one is outside the gap. Moreover, the valley polarity of the spin species
can be controlled by a perpendicular electric field in the FS region. Our
findings may shed light on making silicene-based spin and valley devices in the
spintronics and valleytronics field.Comment: 6 pages, 3 figure
Superconducting correlations in ultra-small metallic grains
To describe the crossover from the bulk BCS superconductivity to a
fluctuation-dominated regime in ultrasmall metallic grains, new order
parameters and correlation functions, such as ``parity gap'' and ``pair-mixing
correlation function'', have been recently introduced. In this paper, we
discuss the small-grain behaviour of the Penrose-Onsager-Yang off-diagonal
long-range order (ODLRO) parameter in a pseudo-spin representation. Relations
between the ODLRO parameter and those mentioned above are established through
analytical and numerical calculations.Comment: 7 pages, 1 figur
The K\"ahler-Ricci flow on surfaces of positive Kodaira dimension
The existence of K\"ahler-Einstein metrics on a compact K\"ahler manifold has
been the subject of intensive study over the last few decades, following Yau's
solution to Calabi's conjecture. The Ricci flow, introduced by Richard Hamilton
has become one of the most powerful tools in geometric analysis.
We study the K\"ahler-Ricci flow on minimal surfaces of Kodaira dimension one
and show that the flow collapses and converges to a unique canonical metric on
its canonical model. Such a canonical is a generalized K\"ahler-Einstein
metric. Combining the results of Cao, Tsuji, Tian and Zhang, we give a metric
classification for K\"aher surfaces with a numerical effective canonical line
bundle by the K\"ahler-Ricci flow. In general, we propose a program of finding
canonical metrics on canonical models of projective varieties of positive
Kodaira dimension
Recommended from our members
Experimental study on transcritical Rankine cycle (TRC) using CO2/R134a mixtures with various composition ratios for waste heat recovery from diesel engines
A carbon dioxide (CO2) based mixture was investigated as a promising solution to improve system performance and expand the condensation temperature range of a CO2 transcritical Rankine cycle (C-TRC). An experimental study of TRC using CO2/R134a mixtures was performed to recover waste heat of engine coolant and exhaust gas from a heavy-duty diesel engine. The main purpose of this study was to investigate experimentally the effect of the composition ratio of CO2/R134a mixtures on system performance. Four CO2/R134a mixtures with mass composition ratios of 0.85/0.15, 0.7/0.3, 0.6/0.4 and 0.4/0.6 were selected. The high temperature working fluid was expanded through an expansion valve and then no power was produced. Thus, current research focused on the analysis of measured operating parameters and heat exchanger performance. Heat transfer coefficients of various heat exchangers using supercritical CO2/R134a mixtures were provided and discussed. These data may provide useful reference for cycle optimization and heat exchanger design in application of CO2 mixtures. Finally, the potential of power output was estimated numerically. Assuming an expander efficiency of 0.7, the maximum estimations of net power output using CO2/R134a (0.85/0.15), CO2/R134a (0.7/0.3), CO2/R134a (0.6/0.4) and CO2/R134a (0.4/0.6) are 5.07 kW, 5.45 kW, 5.30 kW, and 4.41 kW, respectively. Along with the increase of R134a composition, the estimation of net power output, thermal efficiency and exergy efficiency increased at first and then decreased. CO2/R134a (0.7/0.3) achieved the maximum net power output at a high expansion inlet pressure, while CO2/R134a (0.6/0.4) behaves better at low pressure
An efficient solution of Liouville-von Neumann equation that is applicable to zero and finite temperatures
Application of quantum dissipation theory to electronic dynamics has been limited to model systems with few energy levels, and its numerical solutions are mostly restricted to high temperatures. A highly accurate and efficient numerical algorithm, which is based on the Chebyshev spectral method, is developed to integrate a single-particle Liouville-von Neumann equation, and the two longstanding limitations of quantum dissipation theory are resolved in the context of quantum transport. Its computational time scales to O(N3) with N being the number of orbitals involved, which leads to a reality for the quantum mechanical simulation of real open systems containing hundreds or thousands of atomic orbitals. More importantly, the algorithm spans both finite and zero temperatures. Numerical
calculations are carried out to simulate the transient current through a metallic wire containing up to 1000 orbitals. © 2012 American Institute of Physics.published_or_final_versio
Recommended from our members
Effect factors of part-load performance for various Organic Rankine cycles using in engine waste heat recovery
The Organic Rankine Cycle (ORC) is regarded as one of the most promising waste heat recovery technologies for electricity generation engines. Since the engine usually operates under different working conditions, it is important to research the part-load performance of the ORC. In order to reveal the effect factors of part-load performance, four different forms of ORCs are compared in the study with dynamic math models established in SIMULINK. They are the ORC applying low temperature working fluid R245fa with a medium heat transfer cycle, the ORCs with high temperature working fluid toluene heated directly by exhaust condensing at low pressure and high pressure, and the double-stage ORC. It is regarded that the more slowly the system output power decreases, the better part-load performance it has. Based on a comparison among the four systems, the effects of evaporating pressure, condensing condition, working fluid, and system structure on part-load performance are revealed in the work. Further, it is found that the system which best matches with the heat source not only performs well under the design conditions, but also has excellent part-load performance
Recommended from our members
Preliminary experimental comparison and feasibility analysis of CO2/R134a mixture in Organic Rankine Cycle for waste heat recovery from diesel engines
This paper presents results of a preliminary experimental study of the Organic Rankine Cycle (ORC) using CO2/R134a mixture based on an expansion valve. The goal of the research was to examine the feasibility and effectiveness of using CO2 mixtures to improve system performance and expand the range of condensation temperature for ORC system. The mixture of CO2/R134a (0.6/0.4) on a mass basis was selected for comparison with pure CO2 in both the preheating ORC (P-ORC) and the preheating regenerative ORC (PR-ORC). Then, the feasibility and application potential of CO2/R134a (0.6/0.4) mixture for waste heat recovery from engines was tested under ambient cooling conditions. Preliminary experimental results using an expansion valve indicate that CO2/R134a (0.6/0.4) mixture exhibits better system performance than pure CO2. For PR-ORC using CO2/R134a (0.6/0.4) mixture, assuming a turbine isentropic efficiency of 0.7, the net power output estimation, thermal efficiency and exergy efficiency reached up to 5.30 kW, 10.14% and 24.34%, respectively. For the fitting value at an expansion inlet pressure of 10 MPa, the net power output estimation, thermal efficiency and exergy efficiency using CO2/R134a (0.6/0.4) mixture achieved increases of 23.3%, 16.4% and 23.7%, respectively, versus results using pure CO2 as the working fluid. Finally, experiments showed that the ORC system using CO2/R134a (0.6/0.4) mixture is capable of operating stably under ambient cooling conditions (25.2–31.5 °C), demonstrating that CO2/R134a mixture can expand the range of condensation temperature and alleviate the low-temperature condensation issue encountered with CO2. Under the ambient cooling source, it is expected that ORC using CO2/R134a (0.6/0.4) mixture will improve the thermal efficiency of a diesel engine by 1.9%
- …